• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.187-193
• /
• 1999

In this study, PVDF thin films which show the excellent piezoelectricity and pyroelectricity, are prepared by PVD (physical vapor deposition) method, and thir electrical conduction phenomena for analyses of the electrical conduction mechanism and TSC (Thermally Stimulated Current) for identification of the behavior of conductive carriers are investigated. As a result of FT-IR(Fourier Transform Infrared Spectroscopy) spectra, the crystalline phase transforms $\alpha$ type into $\beta$ type with increasing electric field. From XRD (X-Ray diffraction) analyses patterns, the degree of crystallinity increases from 49.8% to 67%, as the substrate temperature increases from $30^{\circ}C$ to $80^{\circ}C$. As a result of electrical conduction phenomena, the electrical conduction mechanism of PVDF thin films is identified as ionic conduction mechanism. From TSC analyses, there are three peaks as P1, P2, P3 with increasing temperature, and with increasing substrate temperature, the peak temperature of TSC increases and the peak intensity of TSC decreases.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.654-657
• /
• 1995

A series of excitation spectra (7Fo→5Do transition) of Eu(Ⅲ) ion in aqueous solution ([Eu(Ⅲ)]=1.12 × 10-2 mol L-1; pH 1.0 to 7.0) were obtained under CO2 free atmosphere using a pulsed tunable dye laser system. The broad and low intensity spectra (peak maximum: 578.89 nm) showed that the trivalent ion (Eu3+) underwent a low degree of hydrolysis at pH below 6.0. Eu(Ⅲ) hydroxo complex formation seemed more significant at pH above 6.0, shown by the occurrence of intense new peak at 578.63 nm. The spectra of those solutions prepared in N2 atmosphere showed no signs of the presence of interfering carbonate species. The Eu(Ⅲ) hydroxo complex formation was not observed when complexation studies between Eu(Ⅲ) ion and weak organic acids (e.g. glutarate and diglycolate) were conducted at pH 6.0 or below.

• The Journal of the Petrological Society of Korea
• /
• v.3 no.1
• /
• pp.34-40
• /
• 1994

High pressure X-ray diffraction study was carried out on a graphite to investigate its compressibility as well as any possible phase transition to the hexagonal diamond structure at room temperature. Energy dispersive X-ray diffraction method was introduced using a Mao-Bell type diamond anvil cell with Synchrotron Radiation. Polycrystalline sodium chloride was compressed together with graphite for the high pressure determinations. Because of the poor resolution of the X-ray diffraction pattern of graphite, its compressibility was estimated to be almost same as that of NaCl by graphite (002) X-ray diffraction peak only. An observation of any new peak from a possible hexagonal diamond phase seems very unplausible for its definite identification based on the present data. Alternative approaches such as an Wiggler Radiation source as well as a Large Volume high pressure apparatus will be necessary for the detailed studies on a graphite in future.

• Journal of the Optical Society of Korea
• /
• v.14 no.1
• /
• pp.33-37
• /
• 2010

The joint transform correlator (JTC) has been the best known technique for pattern recognition and identification. The JTC optically compares the reference image with the sample image then examines match or non-match by acquiring a correlation peak. However, the JTC technique has some problems such as weak correlation discrimination and noise which originates from the interference fringes in the Fourier transform plane. In order to solve these problems, this paper proposes a new technique of modifications of the interference fringes by adopting special iterative filters. Experimental results are presented to show that the proposed technique can successfully improve the correlation peaks and the level of discrimination.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.11
• /
• pp.1857-1863
• /
• 2013

Bulgogi sauces containing electron beam-irradiated garlic powder (1%, 3%, and 5%) were used to compare their irradiation status before and after pasteurization ($85^{\circ}C$, 30 min), using a thermoluminescence (TL) analysis by two different laboratories. The sauces with non-irradiated ingredient only provided a background TL glow curve with a maximum peak after $300^{\circ}C$. However, the presence of irradiated ingredient (1 and 10 kGy) was evident through the typical TL glow curves in a temperature range of 150 to $250^{\circ}C$. The concentration of irradiated ingredients showed a greater impact on identification characteristics than their radiation doses. TL ratios ($TL_1/TL_2$) were not able to confirm the results showing evidence of irradiation through the TL glow curve shapes. Pasteurization showed a negligible effect on the key identification parameters and did not change the shape or temperature range of radiation-specific TL glow peak, but reduced TL glow curve intensity. TL glow curve shape with the maximum peak in a temperature range of $150{\sim}250^{\circ}C$ was the most useful characteristic providing information required for confirming the irradiation status.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.787-791
• /
• 2002

Optimal extraction, separation, and capillary rinsing conditions for capillary electrophoresis (CE) were established to identify the cultivation site (domestic vs. foreign) of Job's-tears (Coix lachrymajobi var. mayuen) using 240 samples (domestic sample n = 121, foreign sample n = 119). Job's-tears was extracted with 30% ethanol and separated on a $50-{\mu}m-I.D.$ untreated fused-silica capillary. Optimal analytic conditions were: temperature, $45^{\circ}C$; voltage, 15 kV; detector rise time, 0.1 sec; and pressure injection, 20 sec. Separation of peak investigated using 0.1 M phosphate buffer (pH 2.5) containing 0.05% hydroxypropylmethylcellulose (P buffer) revealed the optimal separation buffer was P buffer containing 26 mM hexane sulfonic acid with 30% methanol. Under the optimal conditions established for CE, the average correct identification percentage of domestic or foreign Job's-tears was 82%.

• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.171-176
• /
• 1992

Volatile flavor components of Codonopsis lanceolata were extracted by gas co-distillation (GCD), solvent extraction/fractionation (SEF), and headspace sampling (HSS) methods. The extracts were analyzed by dual-capillary gas chromatography-retention index (GC-RI) and gas chromatography-mass spectrometry(GC-MS). The two extracts prepared by SEF and HSS gave more similar fragrance to the Codonopsis lanceolata than the GCD extract. The GC profiles of the SEF and HSS extracts were similar to each other except for differences in peak areas. The extract prepared by SEF gave a sweet note while the extract prepared by HSS gave a green note. The GCD extract began to give a burnt note of herb medicine with prolonged distillation. Rapid extraction of flavor components from Codonopsis lanceolata was possible in several short steps by SEF and HSS methods compared to GCD. GC-MS and GC-RI were used for peak identification. GC-RI was more effective for identification of isomers, and polar FFAP column was more suitable for identification of polar compounds. From Codonopsis lanceolata we identified 35 volatile flavor constituents, 24 of which have not been previously reported by simultaneous distillation extraction method $^{(5)}$. trans-2-Hexanal, cis-3-hexen-1-ol, trans-2-hexen-1-ol, and hexanol were considered key components of the green note and 1-octen-3-ol, the component of the fresh note. Esters, including amyl propionate, seem to be responsible for the sweet note particular to Codonopsis lanceolata.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.3
• /
• pp.54-63
• /
• 1991

This paper describes an effort to develope a microcomputer-based parameter measurement system for a brushless DC motor. Back EMF equation is derived from back EMF waveform of a brushless DC motor. To minimize error the due to the ripple component in the measured armature current, digital averaging filter is employed. The whole identification process of signal generation, measurement parameter determination is fully automated. A new identification algorithm for the brushless DC motor parameters is developed. New parameter correction method is proposed using the deadzone current and the time to reach the peak current. In the proposed correction method, the measured current is in excellent agreement with the estimated current.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.12-15
• /
• 1989

This paper describes the efforts to develop an PC based parameter identification system for the D.C. servomotor. The whole identification process of signal generation, measuring, parameter determination is fully automated. To minimize errors due to the ripple component in the measured armature current, digital averaging filter is employed. The proposed parameter correction method using the deadzone current and the time to reach the peak current resulted in excellent agreement between the measured current and estimated current using the model.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.83-84
• /
• 2011

This study provides floor vibration analysis for a factory constructed by ES-beam using field measured acceleration data. The natural frequencies of the first two modes of floor are extracted from measured data. With this information, a system identification has been performed to produce a numerical model representing existing floor. The peak magnitudes of acceleration for one man walking heel drop load from experiment and numerical model are analyzed using ISO vibration criteria and AIJ vibration performance criteria. The results show that there is no problem in use of ES-beam.