• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1173-1174
• /
• 2007

The project of advanced urban transit system development is developing the advanced vehicle and the core technologies for the cost down by system change, the transport safety and the environmental friendliness and the improvement of passenger service. The product data management system is installed for management of each project. Various data and informations producted from each project are made for database. Therefore, we develop the product data management system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.527-527
• /
• 2016

최근 급증하는 이상기후 등으로 인하여, 가뭄 및 홍수 등의 자연재해가 반복적으로 발생하는 등 수자원관리에 어려움이 증대되고 있다. 본 연구는 토양수분량, 강우량, 수위관측 및 증발산량 관측이 수행되고 있는 용담-구량천 유역을 대상으로, PDM 토양저류 함수 모형을 습윤(6월~9월) 및 건조(10월~5월)기로 분리 적용하여 기간에 따른 유역 유출 특성을 분석하였다. 습윤 및 건조기의 유출률(유량/총강우량)은 각각 0.61~0.65와 0.31~0.42으로 서로 다른 유출 특성을 나타내고 있다. 2014~2015년 유역의 관측 토양 수분 자료(심도 100~200mm)와 PDM 토양저류 함수를 활용한 모의 결과가 습윤기에서 유사한 경향성을 보이고 있다(R2=0.9). 이를 바탕으로 용담-구량천 유역의 토양 저류 및 유출 특성을 분석한 결과, 기간을 습윤기 및 건조기로 분리하여 각각의 유역 유출 모형을 구축하는 것이 필요하다고 판단된다. 향후 단기 홍수 사상의 분석을 통한 홍수 유출 및 토양 저류 분석을 위한 모형을 제시하고자 한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.41-42
• /
• 2022

This study analyzed the process related to the linkage between on-site work targeting the middle size Precast Concrete(PC) public apartment building with beam-column system and prepared on-site works flow relationship diagram in which the wet process consists of core Critical Path(CP) to prepare a network diagram of the Precedence Diagram Method(PDM). Through this study, it is expected that it will be possible to maximize the project management capability by suggesting a method to minimize risk factors and the optimized process management of the beam-column system PC public apartment building.

• Proceedings of the CALSEC Conference
• /
• 1997.11a
• /
• pp.377-384
• /
• 1997

. 표준 진행 사항 - Part 22 (SDAI): FDIS - Part 12 (EXPRESS-I): Technical Report Type II . 새로운 기술, 표준 접목 노력 - CORBA - Java - SGML . 활용 기술 개발 및 구현 - CALS 및 PDM 관련 응용 제품 - 일본 STEP Center의 적극적 참여(중략)

• Bulletin of the Society of Naval Architects of Korea
• /
• v.43 no.2 s.148
• /
• pp.18-22
• /
• 2006

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.2
• /
• pp.222-222
• /
• 2017

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.6
• /
• pp.782-792
• /
• 2016

As the most common neurodegenerative diseases, Alzheimer's disease (AD) and Parkinson's disease (PD) are two of the main health concerns for the elderly population. Recently, microRNAs (miRNAs) have been used as biomarkers of infectious, genetic, and metabolic diseases in humans but they have not been well studied in domestic animals. Here we describe a computational biology study in which human AD- and PD-associated miRNAs (ADM and PDM) were utilized to predict orthologous miRNAs in the following domestic animal species: dog, cow, pig, horse, and chicken. In this study, a total of 121 and 70 published human ADM and PDM were identified, respectively. Thirty-seven miRNAs were co-regulated in AD and PD. We identified a total of 105 unrepeated human ADM and PDM that had at least one 100% identical animal homolog, among which 81 and 54 showed 100% sequence identity with 241 and 161 domestic animal miRNAs, respectively. Over 20% of the total mature horse miRNAs (92) showed perfect matches to AD/PD-associated miRNAs. Pigs, dogs, and cows have similar numbers of AD/PD-associated miRNAs (63, 62, and 59). Chickens had the least number of perfect matches (34). Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analyses suggested that humans and dogs are relatively similar in the functional pathways of the five selected highly conserved miRNAs. Taken together, our study provides the first evidence for better understanding the miRNA-AD/PD associations in domestic animals, and provides guidance to generate domestic animal models of AD/PD to replace the current rodent models.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.2
• /
• pp.157-167
• /
• 2016

The interspecific estimation for tolerance capacities of upland crop species to excessive soil water stress in paddy field is significant in agricultural practices. Most of upland crops can be damaged by either excessive soil water or capillary rise of the water table during rainy season in paddy fields. The major objective of this study was to evaluate water stress of upland crops under different drainage classes in converted paddy field. This experiment was carried out in poorly drained soil (PDS) and imperfectly drained soil (IDS) of alluvial sloping area located at Toero-ri, Bubuk-myeon, Miryang-si, Gyeongsangnam-do. The soil was Gagog series, which was a member of the fine silty, mixed, nonacid, mesic family of Aeric Endoaquepts (Low Humic-Gley soils). Two drainage methods, namely under Open ditch drainage methods (ODM) and, Closed pipe drainage methods (PDM) were installed within 1-m position at the lower edge of the upper paddy fields. The results showed that sum of excess water days ($SWD_{30}$), which was used to represent the moisture stress index, was 42 days (the lowest) in the PDM compared with 110 days in the ODM. Most of upland crops were more susceptible to excessive soil water during panicle initial stage on more PDS than on IDS. Yield of upland crops in the PDM was continuously increased by the rate of 15.1% on sorghum, 15.4% foxtail millet, 53.6% proso millet, 49.6% soybean and 47.9% adzuki bean as compared in the ODM. The capacity for tolerance by excessive soil water based on yield of each upland crop in the poorly drained sloping paddy fields was the order of sorghum, soybean, foxtail millet, proso millet and adzuki bean. Therefore, Sorghum is relatively tolerant to excessive soil water conditions and, may be grown successfully in converted paddy field.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.125-131
• /
• 2014

In order to develop stretchable substrates for wearable packaging applications, the variation behavior of elastic modulus was evaluated for transparent PDMS Sylgard 184 and black PDMS Sylgard 170 as a function of the base/curing agent mixing ratio. Both for Sylgard 184 and Sylgard 170, the true elastic modulus evaluated on a true stress-true strain curve was higher more than two times compared to the engineering elastic modulus obtained from an engineering stres-sengineering strain curve, and their difference became larger with increasing the stiffness of the PDMS. Sylgard 184 exhibited a maximum engineering elastic modulus of 1.74 MPa and a maximum true elastic modulus of 3.57 MPa at the base/curing agent mixing ratio of 10. A maximum engineering elastic modulus of 1.51 MPa and a maximum true elastic modulus of 3.64 MPa were obtained for Sylgard 170 at the base/curing agent mixing ratio of 2.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.6
• /
• pp.553-560
• /
• 2017

3D printing technology has been a great interest in human bio-interfaces and human-like robotics since they require arbitrary and adaptive manufacturing. This research mainly concerns the 3D fabrication of a packed biosensor using elastomeric sheets made of PDMS. It is essential to design the PDMS molding with 3D printing since, in the case of biosensors, it should not only produce a conformal shape depending on an arbitrary skin surface but also guarantee a uniform thickness distribution during solidification in the PDMS prepolymer solution. To satisfy the characteristics of the PDMS molding, such as flexibility in the de-molding and stiffness in the solidification processes, multi-materials have been selectively applied to the PDMS molding design, which has been validated with finite element analyses and compared with the 3D printed molding.