• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.169-175
• /
• 2018

This study deals with a process for the recovery of hydrogen isotopes from methane ($CQ_4$) and water ($Q_2O$) containing tritium in the nuclear fusion exhaust gas (Q is Hydrogen, Deuterium, Tritium). Steam Methane Reforming and Water Gas Shift reactions are used to convert $CQ_4$ and $Q_2O$ to $Q_2$ and the produced $Q_2$ is recovered by the subsequent Pd membrane. In this study, one circulation loop consisting of catalytic reactor, Pd membrane, and circulation pump was applied to recover H components from $CH_4$ and $H_2O$, one of $CQ_4$ and $Q_2O$. The conversion of $CH_4$ and $H_2O$ was measured by varying the catalytic reaction temperature and the circulating flow rate. $CH_4$ conversion was 99% or more at the catalytic reaction temperature of $650^{\circ}C$ and the circulating flow rate of 2.0 L/min. $H_2O$ conversion was 96% or more at the catalytic reaction temperature of $375^{\circ}C$ and the circulating flow rate of 1.8 L/min. In addition, the amount of $CQ_4$ generated by Korean Demonstration Fusion Power Plant (K-DEMO) in the future was predicted. Then, the treatment process for the $CQ_4$ was proposed and HAZOP (hazard and operability) analysis was conducted to identify the risk factors and operation problems of the process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.705-711
• /
• 2000

A thin film oxide semiconductor micro gas sensor array which shows only 60 mW of power consumption at an operating temperature of $300^{\circ}C$ has been fabricated using microfabrication and micromachining techniques. Excellent thermal insulation of the membrane is achieved by the use of a double-layer structure of $0.1\mum\; thick\; Si_3N_4 \;and\; 1 \mum$ thick phosphosilicate glass (PSG) prepared by low-pressure chemical-vapor deposition (LPCVD) and atmospheric-pressure chemical-vapor deposition (APCVD), respectively. The sensor array consists of such thin film oxide semiconductor sensing materials as 1 wt.% Pd-doped $SnO_2,\; 6 wt.% A1_2O_3-doped\; ZnO,\; WO_3$/ and ZnO. Baseline resistances of the four sensing materials were found to be stable after the aging for three days at $300^{\circ}C$. The thin film oxide semiconductor micro gas sensor array exhibited resistance changes usable for subsequent data processing upon exposure to various gases and the sensitivity strongly depended on the sensing layer materials.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.315-322
• /
• 2002

A thin film oxide semiconductor micro gas sensor array which shows only 60㎽ of power consumption at an operating temperature of 30$0^{\circ}C$ has been fabricated using microfabrication and rnicrornachining techniques. Excellent thermal insulation of the membrane is achieved by the use of a double la! or structure of 0.1${\mu}{\textrm}{m}$ thick Si$_3$N$_4$ and 1${\mu}{\textrm}{m}$ thick phosphosilicate glass(PSG) prepared by low pressure chemical vapor deposition(LPCVD) and atmospheric－pressure chemical-vapor deposition(APCVD), respectively. The sensor way consists of such thin film oxide semiconductor sensing materials as 1wt.％ Pd-doped SnO$_2$, 6wt.% AI$_2$O$_3$-doped ZnO, WO$_3$ and ZnO. The thin film oxide semiconductor micro gas sensor array exhibited resistance changes usable for subsequent data processing upon exposure to various gases and the sensitivity strongly depended on the sensing layer materials. Heater Part of the sensor structure has been modified in order to improve the process yield of the sensor, and as a result of modified heater structure improved process yield has been achieved.

• Microbiology and Biotechnology Letters
• /
• v.33 no.4
• /
• pp.308-314
• /
• 2005

Both high glucose and glucose degradation products (GDP) have been implicated in alterations of peritoneal membrane structure and function during long-term peritoneal dialysis (PD). The present study examined the role of GDP including methylglyoxal (MGO), acetaldehyde, and 3,4-dideoxyglucosone (3,4-DGE) in HPMC activation with respect to membrane hyperpermeability or fibrosis. The role of reactive oxygen species (ROS) and activation of protein kinase C (PKC) in GDP-induced HPMC activation were also examined. Using M199 culture medium as control, growth arrested and synchronized HPMC were continuously stimulated by MGO, acetaldehyde, and 3,4-DGE for 48 hours. Vascular endothelial growth factor (VEGF) was quantified as a marker of peritoneal membrane hyperpermeability and fibronectin and heat shock protein 47 (hsp47) as markers of fibrosis. Involvement of ROS and PKC was examined by the inhibitory effect of N-acetylcystein (NAC) or calphostin C, respectively. MGO significantly increased VEGF (1.9-fold), fibronectin (1.5-fold), and hsp47 (1.3-fold) secretion compared with control M199. NAC and calphostin C effectively inhibited MGO-induced VEGF upregulation. Acetaldehyde stimulated and 3,4-DGE inhibited VEGF secretion. Fibronectin secretion and hsp47 expression in HPMC were not affected by acetaldehyde or 3,4-DGE In conclusion, MGO upregulated VEGF and fibronectin secretion and hsp47 expression in HPMC, and PKC as well as ROS mediate MGO-induced VEGF secretion by HPMC. This implies that PKC activation and ROS generation by GDP may constitute important signals for activation of HPMC leading to progressive membrane hyperpermeability and accumulation of extracellular matrix and eventual peritoneal fibrosis.

• The Korean Journal of Physiology and Pharmacology
• /
• v.6 no.3
• /
• pp.165-169
• /
• 2002

We have previously demonstrated that phytoestrogens isolated from safflower seeds significantly attenuated bone loss in ovariectomized rats, and directly stimulated proliferation and differentiation of cultured osteoblastic cells. In an attempt to elucidate underlying cellular mechanisms, in the present study we investigated effects of $17{\beta}-estradiol\;(E_2)$ and phytoestrogens such as matairesinol and acacetin, a type of lignan and flavonoid, respectively, on activation of mitogen activated protein (MAP) kinases, extracellular signal-regulated kinase 1 (ERK1) and ERK2, in cultured osteoblastic ROS 17/2.8 cells. Western blot analysis with anti-MAP kinase antibody showed that a wide range concentrations $(10^{-14}\;to\;10^{-6}\;M)\;of\;E_2$ as well as both phytoestrogens induced rapid and transient activation of ERK1/2 through phosphorylation within minutes. Maximum activation of MAP kinases by $E_2$ and phytoestrogens were observed at 10 and 15 min, respectively. $E_2-induced$ phosphorylation of ERK1/2 returned to the control level at 30 min, whereas phytoestrogen-induced phosphorylation was maintained at high level until 30 min. PD-98059, a highly selective inhibitor of MAP kinase, prevented phosphorylation of ERK1/2 in the cells treated either with $E_2$ or phytoestrogens. To examine a possible involvement of estrogen receptor in the activation process of MAP kinase, Western blot analysis was performed in the presence and absence of the estrogen receptor antagonists, ICI 182,780 and tamoxifen. These antagonists blocked MAP kinase phosphorylation induced not only by $E_2,$ but also by the phytoestrogens. To the best our knowledge, this study is the first to demonstrate that phytoestrogens such as flavonoid and lignan extracted from safflower seeds produce a rapid activation of MAP kinase, at least partially via membrane estrogen receptor of the cultured osteoblastic cells.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.1
• /
• pp.31-37
• /
• 2020

We previously identified a new heparinase inhibitor fungal metabolite, named CRM646-A, which showed inhibition of heparinase and telomerase activities in an in vitro enzyme assay and antimetastatic activity in a cell-based assay. In this study, we elucidated the mechanism by which CRM646-A rapidly induced nucleus condensation, plasma membrane disruption and morphological changes by increasing intracellular Ca²⁺ levels. Furthermore, PD98059, a mitogen-activated protein kinase (MEK) inhibitor, inhibited CRM646-A-induced nucleus condensation through ERK1/2 activation in rat 3Y1 fibroblast cells. We identified CRM646-A as a Ca²⁺ ionophore-like agent with a distinctly different chemical structure from that of previously reported Ca²⁺ ionophores. These results indicate that CRM646-A has the potential to be used as a new and effective antimetastatic drug.

• Reproductive and Developmental Biology
• /
• v.39 no.4
• /
• pp.97-104
• /
• 2015

Glucose is universal and essential fuel of energy metabolism and in the synthesis pathways of all mammalian cells. Glucose is the one of the major precursors of lactose synthesis using glycolysis result in producing milk fat and protein. During the milk fat synthesis, lipoprotein lipase (LPL) and CD36 are required for glucose uptake. Various morecules such as acyl-CoA synthetase 1 (ACSL1) activity of acetyl-CoA synthetase 2 (ACSS2), ACACA, FASN AGPAT6, GPAM, LPIN1 are closely related with milk fat synthesis. Additionally, glucose plays a major role for synthesizing lactose. Activations of lactose synthesize enzymes such as membranebound enzyme, beta-1,4-galactosyl transferase (B4GALT), glucose-6-phosphate dehydrogenase (G6PD) are changed by concentration of glucose in blood resulting change of amount of lactose production. Glucose transporters are a wide group of membrane proteins that facilitate the transport of glucose over a plasma membrane. There are 2 types of glucose transporters which consisted facilitative glucose transporters (GLUT); and sodium-dependent transport, mediated by the Na+/glucose cotransporters (SGLT). Among them, GLUT1, GLUT8, GLUT12, SGLT1, SGLT2 are main glucose transporters which involved in mammary gland development and milk synthesis. However, more studies are required for revealing clear mechanism and function of other unknown genes and transporters. Therefore, understanding of the mechanisms of glucose usage and its regulation in mammary gland is very essential for enhancing the glucose utilization in the mammary gland and improving dairy productivity and efficiency.

• Journal of Veterinary Clinics
• /
• v.32 no.5
• /
• pp.399-403
• /
• 2015

Peritoneal dialysis (PD) is a treatment for renal failure and acute poisoning, and uses the patient's peritoneum in the abdomen as a membrane across which fluids and dissolved substances are exchanged from the blood. In this study, we evaluated the therapeutic efficacy and complications of automated peritoneal dialyzer (APD) in dogs with renal failure. PD was performed in 10 dogs using a swan neck catheter (Neonatal, Coviden) and automatic APD. The efficacy for each dog was assessed by calculating urea reduction ratio (URR) and creatinine reduction ratio (CRR). Mean concentrations of pre-dialysis creatinine and blood urea (BUN) were $7.09{\pm}3.84$ and $145.8{\pm}48.5$, respectively. The mean number of peritoneal dialysis cycles applied was $6{\pm}1$ cycles. Peritoneal dialysis resulted in a significant decrease in BUN concentration in 7/10 dogs, while a significant decrease in creatinine concentration in 9/10 dogs. The mean of URR was higher than that of CRR ($0.39{\pm}0.16$ vs $0.38{\pm}0.13$). The mean CRR and URR per dialysis cycles were $0.064{\pm}0.023$ and $0.065{\pm}0.023$, respectively. Complications found in this study were catheter occlusion, subcutaneous dialysate leakage, septic peritonitis, hypoalbuminemia and overhydration. This study found PD using a swan neck catheter and APD machine showed acceptable efficacy for successful peritoneal dialysis in dogs. However, close monitoring is required to minimize the risk of complication.

• Journal of Environmental Science International
• /
• v.4 no.2
• /
• pp.223-232
• /
• 1995

New two macrocyclic compounds using as carriers of liquid emulsion menbrame, have been synthesized. These reuslts provide evidance for the usefulness of the theory in designing the systems. The efficiency of selective transport for heavy metal ions have been discussed from the membrane systems that make use of $SCN^-$,<>,$I^-$,CN- and $Cl^-$ ion as co-anions in source phase and make use of $S_2O_3^{2-}$ and $P_2O_7^{4-}$ ion as receiving phase, respectively. The transport rate of M(II) was highest when a maximum amount of the M(II) in the source phase was present as$Cd(SCN)_2$$(P[SCN^-]= 0.40M)$, $Hg(SCN)_2([SCN^-]=0.40M)$ and Pd(CN)$([CN^-]= 0.40M)$. The Cd(II) and Pb(II) over each competitive cations were well transprted with 0.3M-S2032- and 0.3M-P2O74-, respectively in the receiving phase. Results of this study indicate that two criteria must be met in order to have effective macrocycle-mediated transport in these emulsion system. First one must effective extraction of the $M^{n+}$ into the toluene systems. The effectiveness of this extraction is the greatest if locK for $M^{n+}$macrocycle interaction is large and if the macrocycle is very insoluble in the aqueous phase. Second, the ratio of the locK values (or Mn+-receiving phase ($S_2O_3^{2-}$- or $P_2O_7^{4-}$) to $M^{n+}$-macrocycle (($L_1$이나 $L_2$) interaction must be large enough to ensure quantitative stripping of Mn+(($Cd^{2+}$,$Pb^{2+}$)at the toluene receiving Phase interface. $L_1$(3.5-benzo-10,13,18,21-tetraoxa-1,7,diazabicyclo(8,5,5) eicosan) forms a stable ($Cd^{2+}$ and >,$Pb^{2+}$ complexes and $L_1$ is very insoluble in water and its $Cd^{2+}$ and >,$Pb^{2+}$ complex is considerably less stable than $Cd^{2+}$-(S2O3)22- and $Pd^{2+}-P_2O_7^{4-}$ complexes. On the other hand, the stability of the $Hg^{2+}$)+-$L_1$( complex exceed that of the $Hg^{2+}$- (S2O3)22- and Hg2+-P2O74-, and the distribution coefficient of $L_2$(5,8,15,18,23,26-hexaoxa-1,12- diazabicyclo-(10,8,8) octacosane) is much smaller than that of $L_1$. Therefore, the partitioning of Lr is favored by the aqueous receiving Phase, and little heavy metal ions transport is seen despite the large logK for $Hg^{2+}$+-$L_1$ and $Mn^+$($Cd^{2+}$+, $Pb^{2+}$+ and $Hg^{2+}$)-$L_2$ interactions. Key Words : macrocycles, transport, heavy metal, co-anion, source phase, receiveing, complex separation, interaction, destribution coefficient.

• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.38-42
• /
• 2008

Highly sensitive and mechanically stable gas sensors have been fabricated using the microfabrication and micromachining techniques. The sensing materials used to detect the offensive $CH_3SH$ and $(CH_3)_3N$ gases are 1 wt% Pd-doped $SnO_2$ and 6 wt% $Al_2O_3$-doped ZnO, respectively. The optimum operating temperatures of the devices are $250^{\circ}C$ and $350^{\circ}C$ for $CH_3SH$ and $(CH_3)_3N$, respectively and the corresponding heater power is, respectively, about 55mW and 85mW. Excellent thermal insulation is achieved by the use of a double-layer membrane: i.e. $0.2{\mu}m$-thick silicon nitride and $1.4{\mu}m$-thick phosphosilicate glass. The sensors are mechanically stable enough to endure the heat cycles between room temperature and $350^{\circ}C$, at least for 30 days.