• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.40-50
• /
• 2023

Recently, the number of components of smartphones increases rapidly, while the PCB size continuously decreases. Therefore, 3D technology with a stacked PCB has been developed to improve component density in smartphone. For the s tacked PCB, it i s very important to obtain solder bonding quality between PCBs. We investigated the effects of the properties, thickness, and number of layers of interposer PCB and sub PCB on warpage of PCB through experimental and numerical analysis to improve the reliability of the stacked PCB. The warpage of the interposer PCB decreased as the thermal expansion coefficient (CTE) of the prepreg decreased, and decreased as the glass transition temperature (Tg) increased. However, if temperature is 240℃ or higher, the reduction of warpage is not large. As FR-5 was applied, the warpage decreased more compared to FR-4, and the higher the number and thickness of the prepreg, the lower the warpage. For sub PCB, the CTE was more important for warpage than Tg of the prepreg, and increase in prepreg thickness was more effective in reducing the warpage. The shear tests indicated that the dummy pad design increased bonding strength. The tumble tests indicated that crack occurrence rate was greatly reduced with the dummy pad.

• Environmental and Resource Economics Review
• /
• v.33 no.3
• /
• pp.263-289
• /
• 2024

In this paper, we quantify the socio-economic impacts of recycling from a carbon social benefit perspective based on a life cycle assessment and economic evaluation of the printed circuit board (PCB) recycling process for waste mobile phones. In particular, we compare the metal recovery process through PCB recycling of waste mobile phones with the traditional metal mining and smelting process, and analyze the change in carbon dioxide emissions under two electricity generation mixes in 2018 and 2030. The analysis shows that for both gold and copper, PCB recycling generates 6.86 times and 3.69 times more carbon dioxide than traditional mining and smelting, respectively. However, when the 2030 electricity generation mix is applied, the amount of carbon dioxide emitted in the recycling process decreases by 44.72% and 44.65% for copper and gold recovery, respectively. This is due to the nature of the recycling process, which uses electricity as the main energy source. A cost-benefit analysis that includes the social cost of carbon dioxide shows a B/C of 1.95, indicating that recycling is economically feasible. However, this result does not take into account both the problem of securing a sufficient amount of waste PCBs and the social cost of the pollutants emitted by the recycling process. Based on the results of this study, it is expected that cost-benefit analyses reflecting the social cost of carbon and carbon dioxide emissions through life cycle assessment of the recycling process will continue to be actively conducted not only for PCB waste recycling, but also for the circular economy and recycling processes that have recently attracted attention.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.1
• /
• pp.77-84
• /
• 2006

This study was conducted to find a system for screening organic resources with 16 species, 62 samples which were selected to randomizing point from city, province and industrial areas in the whole country. Content of organic matters were $65.3%{\sim}98.0%$ in all samples so that they were largely over than 60%, raw material regulation of compost. Concentrations of total nitrogen and total phosphorus were $0.7{\sim}4.8%\;and\;0.8{\sim}5.0$, they could look for effect of the nitrogen and phosphorus supply as a raw material of compost. In case of 8 elements concentrations of heavy metal, they were too high to use as raw materials of compost which were over to regulation limit in Cu, Cr, Ni, and As from fiber industry, Ni from food company and leather industry, and the others are adapt to limit levels. HEM contents fro the highest to $113mg\;kg^{-1}$ from liber industry and PAHs content were the highest to $3,462ug\;kg^{-1}$ from paper-mill manufacture. Distribution of PAHs concentiations were naphthalene>phenanthrene>pyrene>fluoroanthene>acenaphthene. $Microtox{(R)}\;EC_{50}$ values for bioassay were pharmaceutical company>paper-mill manufacture>industrial area sewage sludge>fiber industry>urban sewage sludge>metropolitan sewage sludge. HEM between Zn, Cu, and Ni was significant at the 99% and between Cd was significant at the 95%, Microtox between Hg and BEM significant at the 95%.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.23-33
• /
• 2001

The utility tunnels are the important facility as a mainstay of country because of the latest communication developments. However, the utilities tunnel is difficult to deal with in case of a fire accident. When a cable burns, the black smoke containing poisonous gas will be reduced. This black smoke goes into the tunnel, and makes it difficult to extinguish the fire. Therefore, when there was a fire in the utility tunnel, the central nerves of the country had been paralyzed, such as property damage, communication interruption, in addition to inconvenience for people. This paper is based on the fire occurred in the past, and reenacting the fire by making the real utilities tunnel model. The aim of this paper is the scientific analysis of the character image of the fire, and the verification of each fire protection system whether it works well after process of setting up a fire protection system in the utilities tunnel at a constant temperature. The fire experiment was equipped with the linear heat detector, the fire door, the connection water spray system and the ventilation system in the utilities tunnel. Fixed portion of an electric power supply cable was coated with a fire retardant coating, and a heating tube was covered with a fireproof. The result showed that the highest temperature was $932^{\circ}c$ and the linear heat detector was working at the constant temperature, and it pointed at the place of the fire on the receiving board, and Fixed portion of the electric power supply cable coated with the fire retardant coating did not work as the fireproof. The heating tube was covered with the fireproof about 30 minutes.

• Journal of Life Science
• /
• v.7 no.1
• /
• pp.1-9
• /
• 1997

For the recent years, considerable efforts have been made to rationalize the techniques of research and monitoring of biological effects of marine pollutants such as heavy metals, polychlorinate biphenyls (PCBs), organochlorine pesticides, polycyclic aromatic hydrocarbons (PAHs), organophosphorus pesticides. This study was designed as a part of efforts to investigate the biochemical pollutant markers for diagnosis of marine pollutions by the changes in lipid components of the flounder (Paralichthys olivaceus) in Yellow Sea of Korea. Homoglobin levels in serum of cultured and wild flounders in Yellow Sea were significantly lower (5 - 15% and 20 -25 % , respectively) than those of wild flounder in Pohang. Triglyceride (TG) contents in serum of cultured flounders in Yellow Sea were 10 - 40% higher than those of wild flounder in Pohang. Total and low density lipoprotein (LDL)-cholesterol contents in serum of flounders in Yellow Sea were significantly 10-15% and 30-35% (cultured), and 10-20% (wild), respectively, higher than those of wild flounder in Pohang. Atherogenic index (AI) and T-Chol/PL rations in serum of cultured and wild flounders in Yellow sea were significantly 20-45% and 10-!5%, 6-35% and 15-35%, respectively, higher than those of wild flounder in pohang. These results suggest that near-coastal waters as well as neritic waters of the Yellow Sea might be affected by pollutant input.

• Korean journal of applied entomology
• /
• v.44 no.2
• /
• pp.97-108
• /
• 2005

Samples of water, soil, and sediment were taken from 10 streams near Andong, Korea in May 2004. To assess the degree of environmental pollution of each stream, chemical pollutants such as total notrogen (T-N), total phosphorus (T-P), chemical oxygen demand (COD), heavy metals, organophosphorus pesticides, organochlorine pesticides, and dioxin-like PCB congeners were analyzed by standard process tests or U.S. EPA methods. In addition, biomarkers originated from insect immune systems of beet armyworm, Spodoptera exigua, were used to analysis of the environmental samples. Except Waya-chun stream showing T-N content of 9.12 mg/L, most streams were contaminated with relatively low levels of overall pollutants in terms of T-N, T-P, and COD, compared to their acceptable environmental levels designated by the Ministry of Environment. Contents of Pb and Cd in samples of each stream were much lower than environmentally permissible levels. However, several times higherconcentrations of Pb and Cd were found in locations at Mi-chun, Kilan-chun, and Hyunha-chun streams, in comparison with other streams. Diazinon, parathion, and phenthoate compounds among organophosphorus pesticides were detected as concentrations of 0.19, 0.40, and $1.13\;{\mu}g/g$, respectively, from soil sample collected in the vicinity of Mi-chun stream. On the other hand, 16 organochlorine pesticides and 12 dioxin-like PCB congeners, known as endocrine disrupting chemicals, selected in this study were not found above the limit of detection. Biomarker analyses using insect immune responses indicated that Waya-chun stream was suspected as exposure to environmental pollutants. Limitation and compensation of both environmental analysis techniques are discussed.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.349-355
• /
• 2012

In this study, we configured a system which ranks hazardous chemicals to determine their management priorities based on experts' opinions and the existing CRS (chemical ranking and scoring). Aggregate exposure of food, health functional food, oriental/herbal medicine and cosmetics have been taken into account to determine management priority. In this study, 25 hazardous chemicals were selected, such as cadmium, lead, mercury, and arsenic, etc. These 25 materials were ranked according to their 1) risk (exposure or hazard) indexes, 2) exposure source-based weight, and 3) public interests, which were also formed based on the existing priority ranking system. Cadmium was scored the highest (178.5) and bisphenol A the lowest (56.8). Ten materials -- cadmium, lead, mercury, arsenic, tar, acrylamide, benzopyrene, aluminium, benzene, and PAHs -- scored higher than 100. Eight materials -- aflatoxin, manganese, phthalate, chromium, nitrate/nitrite, ethylcarbamate, formaldehyde, and copper -- recorded scores in the range from 70 to 100. Also evaluated as potential risks were 7 materials; sulfur dioxide, ochratoxin, dioxins, PCBs, fumonisin, methyl mercury, and bisphenol A, and these materials were scored above 50. Then we compared risk index and correlation coefficient of total scores to confirm the validity of the total scores; we analyzed correlation coefficient of parameter and indicator. We discovered that the total score and weight, which has incorporated public interests, were high and statistically significant. In conclusion, the result of this study contributes to strengthening risk assessment and risk management of hazardous chemicals.

• Journal of Nutrition and Health
• /
• v.44 no.1
• /
• pp.61-73
• /
• 2011

The aim of this study was to develop a reliable dietary questionnaire to assess human exposure to food-borne hazards. Eleven food-borne hazards were chosen as a priority control list through a literature review and advisory committees. The 11 food-borne hazards were phthalate, aflatoxin, bisphenol A, polycyclic aromatic hydrocarbons, dioxin, polychlorinated biphenyls, mercury, lead, cadmium, arsenic, and acrylamide. The characteristics, exposure level, and paths of these hazards were reviewed, and questionnaire items were identified to assess human exposure from the literature. A questionnaire was developed for each selected food based on its characteristics. Based on the items in the individual questionnaires, a comprehensive questionnaire, which contained demographic characteristics, job information, socioeconomic factors, health related lifestyles, and dietary behaviors, was developed. A 99-item food frequency questionnaire (FFQ) to assess food-borne hazard exposure was also developed. The FFQ included frequency of food intake during the previous year, container type for purchasing and storing food, and cooking method. The questionnaire developed in this study could be applied to assess dietary factors during an exposure assessment of food-borne hazards in a large population. A validation study for the questionnaire is needed before applying it to surveys.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.92-100
• /
• 2005

This study was conducted to find suitable methods for screening organic resources useful for compost. Twenty-seven industrial and domestic sludges were collected from various cities and industrial areas. Contents of organic matters in the sludges were in the range of 79.3-98.0%, and the contents were much higher than the regulation level (60%) for raw materials of compost. Contents of total nitrogen were in the range of 0.8-2.6%. Contents of Fe and Al were very high. Content of HEM was highest in textile sludge ($257mg\;kg^{-1}$) and the contents in the others were in the range of $12.6-90.3mg\;kg^{-1}$. Content of PAHs was lowest in food sludge ($739.1{\mu}g\;kg^{-1}$ and pulp-mill sludge had the highest PAHs content ($3461.8{\mu}g\;kg^{-1}$). $Microtox^{(R)}$ $EC_{50}$ values were higher in the sludges which were classified as a possible material in composting after analysis and investigation. Lettuce root elongation and $EC_{50}$ values were relatively lower in pulp-mill sludge, sewage sludge 3 (Large city), food sludge and leather sludge. Therefore, mineral nutrients, heavy metals, organic compounds (HEM, PAHs, PCBs), and bioassay ($Microtox^{(R)}$ $EC_{50}$, Relative root elongation test) are recommended to be included in the screening system of raw material of compost in addition to the current regulation with organic matter and 8 heavy metals.