• 전산구조공학
• /
• 제3권2호
• /
• pp.89-95
• /
• 1990

근세 사회의 눈부신 산업발전과 함께 늘어나는 빈번한 차량 하중을 좀더 합리적으로 충분히 노반에 분산시키기 위하여 콘크리트포장이 근래 널리 이용 되어져 왔다. 아스팔트계 포장의 표층이 휨응력에 저항하지 못하고 하중을 받으면 표층의 변형이 그대로 노반에 전달되어 일체로되어 변형을 하지만 콘크리트 포장은 콘크리트 슬래브가 구조체로서의 높은 휨강도와 큰 탄성계수에 의해 휨응력 및 전단력에도 저항을 하게 되므로 차량하중뿐만 아니라 주기적인 온도 변화에 의한 팽창, 수축, 솟음, 노상 노반의 체적변화등에 의한 복잡한 응력을 받게된다. 이러한 콘크리트 포장구조의 제응력 현상을 구조 역학적인 입장에서 좀더 정확하게 합리적으로 해석을 하기위해 유한요소법을 이용한 컴퓨터 구조해석 프로그램을 개발하여 모든 하중 조건하에서의 슬래브 처짐과 응력을 계산하고 예상하므로써 콘크리트 포장구조의 파괴현상을 연구하고 합리적인 설계자료를 제공하고자 한다.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.9-20
• /
• 2014

PURPOSES : This study is to compare load transfer efficiency of key joint and dowel joint for airport concrete pavement. METHODS : As AC150/5320-6D of FAA's [Advisory Circular] was changed into AC150/5320-6E, Key joint type of rigid pavement were excluded from Construction Joints. LTE(Load Transfer Efficiency) of dowel joint and key joint were compared by times and seasons through pavement temperature measurement, ocular investigation and HWD measurement. RESULTS : For the joint performance grade of No. 2(The second) runway of airport, 12% of poor rate was observed in key joint and 2% of poor rate in dowel joint. Poor rate of key joint was increased to 17%, if only No. 3~No. 6 slabs, which are mostly loaded from the airplanes, were applied for the study. In apron area, LTE poor rate of key joint was high in winter, and LTE poor rate of dowel joint was at least above 'Fair' grade. In summer, 'Fair' for key joint, 'Acceptable' for dowel joint appeared. CONCLUSIONS : As results, dowel joint was superior than key joint for LTE. Deviations of seasons and times were smaller in dowel joint's result. And LTE in winter was lower than LTE in summer.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.469-474
• /
• 1999

The object of study is analysis to joint crack behavior of cracked joint concrete pavement. In the new constructing concrete pavement, joint crack behavior was compared general joint depth D/4 with joint depth D/3 and D/5 that it's environmental effects changed temperature and humidity. After joint saw cutting joint section was predicted crack at joint depth D/5 test section from the result for monitoring development of crack. In the setting of data logger system of the joint section, it's data compared see with the naked eye. In the research, development of crack at the joint section should effect to joint saw timing latter than joint depth. This performance could be the minimum of deterioration to the early curing. In this research, At new constructing of joint concrete pavement of highway, the monitoring system be setting after finished paving and joint sawing. The system and see with the naked eye could be analysis to pavement behaviors from collecting data at the test section. This system could be monitoring shot term and long term. In this report, joint section of crack behavior analysis used to collected data during a month after paving and joint sawing.

• 한국도로학회논문집
• /
• 제19권3호
• /
• pp.11-18
• /
• 2017

PURPOSES : This study investigates the effect on concrete pavement accordance with the curing methods in cool weather and supports the best method in the field. METHODS : Two field tests evaluated the curing methods of concrete pavement in cool weather. Firstly, five curing methods were tested, including normal curing compound, black curing compound, bubble sheet, curing mat, and curing mat covered with vinyl. Concrete maturity was compared from temperature data. Secondly, normal curing compound and curing mat with vinyl, which showed the best performance, were compared in terms of maturity and join condition index. RESULTS:From the field tests, it is an evident that curing mat with vinyl accelerated the concrete strength. Therefore, it is possible to conduct saw-cut works in cool weather, which minimizes damage on concrete at joint. CONCLUSIONS : For concrete pavement in cool weather, using curing mat with vinyl as the curing method could overcome the strength delay. Therefore, strength and durability problems on concrete at joint due to cool weather would be fewer in the future.

• 산업기술연구
• /
• 제19권
• /
• pp.245-251
• /
• 1999

The joint in the concrete pavement provides a control against transverse or longitudinal cracking at slab, which may be caused by temperature or moisture variation during or after hydration. Without control of cracking, random crack may cause more serious distresses and result in structural or functional failure of pavement system. Sometimes, joint itself, purposed to control crack, may cause a distresses in joint due to its inherent weakness in structural integrity. Thus, the load transfer capacity in joint is very important for serviceability and durability. The purpose of this dissertation was to develop an evaluation system at joints of jointed concrete pavement using finite element analysis was performed using ILLI-SLAB program with a selected variables which might affect fairly to on the performance of transverse joints. The most significant variables were selected from precise analysis. It was concluded that the variables which most significantly affect to pavement deflections are the modulus of subgrade reaction(K) and the modulus of dowel/concrete interaction(G), and limiting criteria on the performance of joints at JCP at 300pci, 500,000 lb/in. respectively.

• International Journal of Concrete Structures and Materials
• /
• 제18권3E호
• /
• pp.145-150
• /
• 2006

An experiment with the objective of providing guidelines for joint depth determination and timing of contraction joint sawcutting to avert uncontrolled cement concrete pavement cracking has been conducted. Theoretical analysis and laboratory tests were performed to help in understanding and analyzing the field observation. Using two-dimensional elastic fracture mechanics, the influence of several parameters on crack propagation was delineated by a parametric study, involving initial notch ratio, joint spacing, Young's modulus and thermal expansion coefficient of concrete, temperature gradient, and modulus of subgrade reaction. Bimaterials made of rock plus cement mortar and rock plus polymer mortar were applied to the concrete in a field test section, and they were subjected to fracture tests. These tests have shown that fracture mechanics is a powerful tool not only in judging the quality of the jointed cement concrete pavement but also in providing a criterion for crack propagation and delamination. Based on fracture mechanics, a method is proposed to determine the joint depth, sawcut timing, and spacing of the jointed cement concrete pavement. This method has successfully been applied to a test section in Seohaean expressway. This study also summarizes the research results obtained from a field test for jointed plain concrete pavement, which was also carried out on the Seohaean expressway.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.9-18
• /
• 2008

줄눈 콘크리트포장(JCP-Jointed Concrete Pavement)의 경우 포장단면 온 습도차에 의해 슬래브 내의 컬링이 발생하게 된다. 컬링에 의해서 발생하는 슬래브의 휨 형상 및 크기는 포장내 응력 및 평탄성에 영향을 미치기 때문에 포장의 구조적, 기능적 성능에 중요한 영향을 줄 수 있다. 슬래브의 휨 형상을 직접 측정하는 것은 시공초기에 포장내에 다량의 계측기를 매설하여야 하며, 시공초기부터 거동의 정교한 측정이 필요하고 고가의 실험비용 및 기술적 인 어려움을 갖고 있다. 본 연구에서는 현장에서 손쉽게 획득할 수 있는 프로파일 데이터(Profile Data)에 파워 스펙트럼 분석(Power Spectrum Density Analysis) 및 역 푸리에 변환(Inverse Fast Fourier Transform) 기법 등을 적용하여 임의의 시간에서 줄눈 콘크리트포장의 슬래브 휨 형상을 측정하는 방법을 개발하였다. 개발한 기법의 실효성을 검증하기 위하여 국내 중부내륙에 위치한 시험도로 줄눈 콘크리트 포장에서 시간대별 프로파일을 측정하고 이 데이터로부터 슬래브 휨 형상을 도출하여 그 결과를 검토하였다. 또한 동 시간대의 연속철근 콘크리트포장(CRCP- Continuous Reinforced concrete Pavement) 구간에서의 프로파일 데이터를 분석하고 이를 줄눈 콘크리트포장에서의 결과와 비교하여 개발한 슬래브 휨 형상 추출기법의 타당성을 검증하였다.

• 한국도로학회논문집
• /
• 제16권4호
• /
• pp.1-9
• /
• 2014

PURPOSES: The objective of this study is to evaluate construction issues and design for transverse steel in continuously reinforced concrete pavement(CRCP). METHODS : The first continuously reinforced concrete pavement(CRCP) design procedure appeared in the 1972 edition of the "AASHTO Interim Guide for Design of Pavement Structures", which was published in 1981 with Chapter 3 "Guide for the Design of Rigid Pavement" revised. A theory that was accepted at that time for the analysis of steel stress in concrete pavement, called subgrade drag theory(SGDT), was utilized for the design of reinforcement of CRCP - tie bar design and transverse steel design - in the aforementioned AASHTO Interim Guide. However SGDT has severe limitations due to simple assumptions made in the development of the theory. As a result, any design procedures for reinforcement utilizing SGDT may have intrinsic flaws and limitations. In this paper, CRCP design procedure for transverse steel was introduced and the limitations of assumptions for SGDT were evaluated based on various field testing. RESULTS: Various field tests were conducted to evaluate whether the assumptions of SGDT are reasonable or not. Test results show that 1) temperature variations exist along the concrete slab depth, 2) very little stress in transverse steel, and 3) warping and curling in concrete slab from the field test results. As a result, it is clearly revealed out that the assumptions of SGDT are not valid, and transverse steel and tie bar designs should be based on more reasonable theories. CONCLUSIONS : Since longitudinal joint is provided at 4.1-m spacing in Korea, as long as joint saw-cut is made in accordance with specification requirements, the probability of full-depth longitudinal cracking is extremely small. Hence, for transverse steel, the design should be based on the premise that its function is to keep the longitudinal steel at the correct locations. If longitudinal steel can be placed at the correct locations within tolerance limits, transverse steel is no longer needed.

• 대한토목학회논문집
• /
• 제26권1D호
• /
• pp.89-94
• /
• 2006

오늘날 도로포장은 중차량의 증가와 고온현상으로 인하여 도로파손이 급격하게 증가하고 있다. 이러한 이유로 한국도로공사에서는 시험도로운영센터를 설립하였으며, 여기서는 실제 도로에서의 상황을 모사하여 현장적용성이 우수한 데이터를 얻어 포장의 장기공용성 예측을 보다 효율적으로 하고자 하는 것이다. 본 연구에서는 장기공용성 예측을 위하여 원더링 장비를 개발하고자 하였으며 이를 적용, 동적하중 재하시험을 실시하였다. 이를 통해 아스팔트 도로포장의 거동 특성을 파악하였다. 결과적으로 원더링을 적용하여 아스팔트 포장의 거동 특성을 해석한 결과 전 층 단면에서 영향을 보이는 것으로 나타났다. 따라서 원더링을 적용한 포장의 장기공용성 예측은 기존의 연구방법보다 정확한 예측이 가능할 것으로 사료된다.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.157-164
• /
• 2010

본 연구는 프리스트레스가 도입된 접속슬래브(Single-PTAS: Single Post-Tensioned Approach Slab)의 긴장력 도입에 따른 거동과 환경하중에 대한 거동을 분석하기 위하여 시험시공 현장에서 실험을 통해 수행되었다. 실험을 위해 온도측정센서를 슬래브의 깊이에 따라 장착하였으며, 변위측정게이지를 슬래브의 여러 위치에 설치하여 환경하중 및 긴장력 도입에 따른 슬래브의 변위 변화를 3차원적으로 측정하였다. 실험결과 접속슬래브는 길이가 짧아 긴장력 도입에 의한 급격한 종방향 변위 변화는 관찰되지 않았다. 접속슬래브의 깊이별 일일 온도변화는 깊이가 약 35cm보다 깊을 경우에는 거의 발생하지 않았으며, 수직온도구배는 접속슬래브의 두께가 큰 교대부근에서는 포장과 인접하는 부근에서 보다 작아졌다. 컬링 시 수직변위의 변화 양상 및 크기는 측정 지점의 수직온도구배와 직접적으로 관계가 있었다. Single-PTAS의 거동을 분석한 결과 콘크리트 포장 슬래브와 매우 유사한 거동을 보였으며, 따라서 차륜하중만을 고려하여 단순보로 설계하고 있는 접속슬래브에 포장체의 개념을 도입한 설계방안의 정립이 필요한 것으로 판단되었다.