• Journal of the Korean Society of Radiology
• /
• v.81 no.3
• /
• pp.688-700
• /
• 2020

Purpose To compare the incidence, survival rate, and CT findings of acute exacerbation (AE) of idiopathic pulmonary fibrosis (IPF) between patients with and without lung cancer. Materials and Methods From June 2004 to July 2018, 89 consecutive patients diagnosed with IPF were included. Among them, 26 patients had IPF with lung cancer (IPF-LCA), and 63 patients had IPF alone. The clinical characteristics and CT findings associated with IPF, lung cancer, and AE were reviewed. Surgery and chemotherapy were performed for 6 and 23 cases of lung cancer, respectively, as the first- or second-line anticancer treatment. The overall survival, CT findings, disease-free period before AE, and duration from the onset of AE to death were compared. Results The incidence of AE was 61.5% in the IPF-LCA group and 58.7% in the IPF group (p = 0.806). The mean overall survival in the IPF-LCA and IPF groups were 16.8 and 83.0 months, respectively (p < 0.001). The mean durations from the start of the lung cancer treatment to the onset of AE were 16.0 and 4.6 months in cases of surgical treatment and chemotherapy, respectively. In comparison of death from AE, the survival rate was significantly lower in the IPF-LCA group than in the IPF group (p = 0.008). In the CT findings associated with AE, the IPF-LCA group tended to have a peribronchial (p < 0.001) or asymmetric distribution (p = 0.016). Conclusion In patients with IPF who develop lung cancer, the rate of death from AE is higher than that in patients with IPF alone. They tend to have unusual CT patterns associated with AE, such as a peribronchial or asymmetric distribution.

• Korean Journal of Radiology
• /
• v.24 no.8
• /
• pp.807-820
• /
• 2023

Objective: To assess whether computed tomography (CT) conversion across different scan parameters and manufacturers using a routable generative adversarial network (RouteGAN) can improve the accuracy and variability in quantifying interstitial lung disease (ILD) using a deep learning-based automated software. Materials and Methods: This study included patients with ILD who underwent thin-section CT. Unmatched CT images obtained using scanners from four manufacturers (vendors A-D), standard- or low-radiation doses, and sharp or medium kernels were classified into groups 1-7 according to acquisition conditions. CT images in groups 2-7 were converted into the target CT style (Group 1: vendor A, standard dose, and sharp kernel) using a RouteGAN. ILD was quantified on original and converted CT images using a deep learning-based software (Aview, Coreline Soft). The accuracy of quantification was analyzed using the dice similarity coefficient (DSC) and pixel-wise overlap accuracy metrics against manual quantification by a radiologist. Five radiologists evaluated quantification accuracy using a 10-point visual scoring system. Results: Three hundred and fifty CT slices from 150 patients (mean age: 67.6 ± 10.7 years; 56 females) were included. The overlap accuracies for quantifying total abnormalities in groups 2-7 improved after CT conversion (original vs. converted: 0.63 vs. 0.68 for DSC, 0.66 vs. 0.70 for pixel-wise recall, and 0.68 vs. 0.73 for pixel-wise precision; P < 0.002 for all). The DSCs of fibrosis score, honeycombing, and reticulation significantly increased after CT conversion (0.32 vs. 0.64, 0.19 vs. 0.47, and 0.23 vs. 0.54, P < 0.002 for all), whereas those of ground-glass opacity, consolidation, and emphysema did not change significantly or decreased slightly. The radiologists' scores were significantly higher (P < 0.001) and less variable on converted CT. Conclusion: CT conversion using a RouteGAN can improve the accuracy and variability of CT images obtained using different scan parameters and manufacturers in deep learning-based quantification of ILD.

• Journal of the Korean Society of Radiology
• /
• v.81 no.6
• /
• pp.1424-1435
• /
• 2020

Purpose The purpose of this study was to evaluate the usefulness of multiphasic CT and ¹⁸F-fluorodeoxyglucose (FDG) PET/CT for the differentiation of combined hepatocellular carcinoma-cholangiocarcinoma (cHCC-CCA) from hepatocellular carcinoma (HCC). Materials and Methods From January 2007 to April 2016, 93 patients with pathologically confirmed HCC (n = 84) or cHCC-CCA (n = 9) underwent CT and PET/CT imaging. Contrast enhancement patterns were divided into three types based on the attenuation of the surrounding liver parenchyma: type I (early arterial enhancement with delayed washout), type II (early arterial enhancement without delayed washout), and type III (early hypovascular, infiltrative appearance, or peripheral rim enhancement). Results cHCC-CCAs (89%) had a higher PET/CT positive rate than did HCCs (61%), but the PET/CT positive rate did not differ significantly (p = 0.095). Among the 19 cases of the type II enhancement pattern, 3 (21%) of 14 HCCs and 4 (80%) of 5 cHCC-CCAs were PET/CT positive. cHCC-CCAs had a significantly higher PET/CT positive rate (p = 0.020) in the type II enhancement pattern. Conclusion The PET/CT positive rate of cHCC-CCA was significantly higher than that of HCC in lesions with a type II enhancement pattern. The ¹⁸F-FDG PET/CT can be useful for the differentiation of cHCC-CCA from HCC in lesions with a type II enhancement pattern on multiphasic CT.

• Journal of Nutrition and Health
• /
• v.57 no.3
• /
• pp.336-348
• /
• 2024

Purpose: The use of food delivery services is increasing continuously in Korea, which may lead to nutritional problems and obesity. Despite this, the research on the association between delivered food consumption and obesity has been insufficient. This study examined the relationship between delivered food consumption and dietary behaviors and obesity among young adults in Jeju. Methods: An online survey was conducted from March 15 to April 5, 2023; 312 participants aged 19-39 years were included in the final analysis. The frequency, types, and time of delivered food consumption were measured using a questionnaire. The dietary behaviors included the following: eating out, breakfast consumption, recognition of nutrition labels, and eating salty foods, vegetables, and fruit. Obesity was defined using the body mass index based on self-reported body weight and height. Results: Approximately 59.3% of the participants ordered delivery foods more than one time/week. The frequency of delivered food consumption was higher in people who consumed breakfast < 5 times/week than those who consumed ≥ 5 times/week (p = 0.0088). People who usually eat salty foods tended to consume delivered food more frequently than those who did not (p = 0.0377). On the other hand, people who consumed fruits ≥ 1 time/day had a higher frequency of delivered food consumption than those who consumed fruits < 1 time/day (p = 0.0110). After adjusting for the confounding variables, the group who consumed delivered foods more than three times/week had an increased odds ratio (OR) of obesity compared to those who consumed less one time/week (OR, 2.38; 95% confidence intervals, 1.12-5.06). Conclusion: Young adults in Jeju who frequently consume delivered foods tended to have poor dietary habits including skipping breakfast and eating salty, and they had an increased odds of obesity. The overall dietary patterns can be improved by providing nutrition education and developing policies to promote or support healthy food choices when ordering delivered foods or eating out.

• Journal of Food Hygiene and Safety
• /
• v.39 no.1
• /
• pp.9-15
• /
• 2024

This study was performed to survey the distribution of Listeria spp. in fresh agricultural products in the Busan area, the Republic of Korea, from January to November 2022. We investigated the pathogenicity and epidemiological relationships by tracing isolated strains using polymerase chain reaction and pulsed-field gel electro-phoresis (PFGE) methods. Forty cases of Listeria spp. were detected in the 210 samples of fresh agricultural products analyzed. Four species, Listeria rocourtiae, L. innocua, L. grayi, and L. monocytogenes were detected only in green vegetables (lettuce, perilla leaps) and the others (L. innocua, L. monocytogenes, and L. grayi) were detected in enoki and oyster mushrooms. L. innocua was detected in 22 samples and L. grayi in six samples. L. monocytogenes, which causes foodborne diseases, was only detected in enoki mushrooms and the strains that were isolated had genes responsible for the pathogenicity of listeriosis (iap, prfA, inlA, inlC, inlJ, and hly). To investigate the genetic similarity and contamination route of L. monocytogenes, serotyping and PFGE were conducted for 12 strains isolated from fresh agricultural (10 strains) and poultry (2 strains) products distributed at a market in the Busan area. Two serotypes (1/2a, 1/2b) were detected in strains isolated from the agricultural and poultry products, but serotype 1/2b was only detected in strains isolated from agricultural products. PFGE analysis showed index of similarity values of 45.7 to 100% and the same patterns were represented in isolates from some enoki mushrooms. These isolates had the same serotypes and showed significant epidemiological relationships.

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.73-87
• /
• 2024

Wolfiporia hoelen (Fr.) Y.C.Dai & V. Papp, commonly known as Poria cocos, is a significant traditional herb used for medicinal and culinary purposes Asian and European countries. Many studies have confirmed that the main components of W. hoelen have pharmacological activities and thatits extract has been shown to affect bone metabolism. This study aimed to the potential of a 50% ethanol extract of the sclerotium of W. hoelen for preventing and treating bone diseases. The ethanol extract was systematically fractionated using n-hexane, dichloromethane, and ethyl acetate. The dichloromethane fraction caused an approximately 29% increase in alkaline phosphatase (ALP) differentiation activity in C2C12 cells compared to the control. Four compounds isolated from this active dichloromethane fraction were identified through instrumental analysis and literature references as 3α-dehydrotrametenolic acid, ergosterol, pachymic acid, and dehydrotumulosic acid. All four compounds were evaluated at increasing concentrations (1, 3, 10, 30, and 100 μM) to determine their effects on ALP differentiation activity in C2C12 cells and RANKL-induced inhibition activity in bone marrow macrophages (BMMs), with a concurrent assessment of cytotoxicity at these concentrations. At a concentration of 3 μM, dehydrotumulosic acid caused a 160% increase in ALP activity, 24% higher than in the BMP-2 control. BMMs treated with dehydrotumulosic acid at concentrations between 10 and 100 μM showed a substantial 15-86% decrease in RANKL-induced inhibition activity compared to the control, with distinct patterns of RANKL inhibition and cytotoxicity observed at 10 μM. These findings suggest that the ethanol extract from the sclerotium of W. hoelen has potential to modulate bone-cell differentiation, while highlighting the possible benefits of dehydrotumulosic acid isolated from the dichloromethane fraction of W. hoelen for preventing and treating osteoporosis.

• Sim-seong Yeon-gu
• /
• v.28 no.2
• /
• pp.107-138
• /
• 2013

The purpose of this article is to awaken our colleagues to the culture and mind issues that have been forgotten or neglected by contemporary psychiatry under the prevalence of materialistic orientation. Cultural psychiatry too, though it has been contributed a great deal to widen the mental vision of psychiatry, has revealed several limitations in its approach. In the course of one sided search for culture specific factors in relation to mental health, conventional cultural psychiatry has neglected an effort to explore the common root underlying the different cultures and the common foundation of human mind. Cross sectional comparisons of the cultures alone have inevitably prevented the global considerations to culutre and mind in historical aspects and the dynamic interactions between mind and culture more in depth. The author suggested that the total view of mind and total approach of analytical psychology of C.G. Jung might be capable to replenish those limitations. Author explained the ways of C.G. Jung's observations and experiences of non-western culture and his concepts of culture and mind. The author demonstrated Jung's view of culture with the example of Filial Piety, Hyo, the Confucian moral norm which can be regarded as components of the collective consciousness though connected with archetypal patterns of behavior of intimacy between parent and child. In regard to the coexistence of multi-religious cultures in Korea the author made a proposal of 'culture spectrum' model for understanding value orientations of person in religious cultures. He identified in case of the Korean 4 types of cultural spectrums: Person with predominantly the Buddhist culture; with the Confucian; with the Shamanist; and with the Christian culture. The author also made an attempt to depict the dynamic interactions of different religious cultures in historical perspectives of Korea. Concepts of mind from the Eastern thoughts were reviewed in comparison with Jung's view of mind. The Dao of Lao Zi, One Mind by Wonhyo, the Korean Zen master from the 7th century, the Diagram of the Heaven's Decree by Toegye, a renowned Neo-Confucianist of Korea from the 16th century and his theory of Li-Ki, were explored and came to conclusion that they represent certainly the symbol of the Self in term of C.G. Jung. The goal of healing is 'the becoming whole person'. Becoming whole person means bringing the person as an individual to live not only within the specific culture but also to live in the world beyond the culture which is deeply rooted in the primordial foundation of human mind.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.1
• /
• pp.82-108
• /
• 2024

With the transition of archaeological recording method's transition from analog to digital, the 3D scanning technology has been actively adopted within the field. Research on the digital archaeological digital data gathered from 3D scanning and photogrammetry is continuously being conducted. However, due to cost and manpower issues, most buried cultural heritage organizations are hesitating to adopt such digital technology. This paper aims to present a digital recording method of relics utilizing open-source software and photogrammetry technology, which is believed to be the most efficient method among 3D scanning methods. The digital recording process of relics consists of three stages: acquiring a 3D model, creating a joining map with the edited 3D model, and creating an digital drawing. In order to enhance the accessibility, this method only utilizes open-source software throughout the entire process. The results of this study confirms that in terms of quantitative evaluation, the deviation of numerical measurement between the actual artifact and the 3D model was minimal. In addition, the results of quantitative quality analysis from the open-source software and the commercial software showed high similarity. However, the data processing time was overwhelmingly fast for commercial software, which is believed to be a result of high computational speed from the improved algorithm. In qualitative evaluation, some differences in mesh and texture quality occurred. In the 3D model generated by opensource software, following problems occurred: noise on the mesh surface, harsh surface of the mesh, and difficulty in confirming the production marks of relics and the expression of patterns. However, some of the open source software did generate the quality comparable to that of commercial software in quantitative and qualitative evaluations. Open-source software for editing 3D models was able to not only post-process, match, and merge the 3D model, but also scale adjustment, join surface production, and render image necessary for the actual measurement of relics. The final completed drawing was tracked by the CAD program, which is also an open-source software. In archaeological research, photogrammetry is very applicable to various processes, including excavation, writing reports, and research on numerical data from 3D models. With the breakthrough development of computer vision, the types of open-source software have been diversified and the performance has significantly improved. With the high accessibility to such digital technology, the acquisition of 3D model data in archaeology will be used as basic data for preservation and active research of cultural heritage.

• The Journal of Korean Society for School & Community Health Education
• /
• v.25 no.2
• /
• pp.27-44
• /
• 2024

Objectives: This study aimed to provide foundational data for preventing adolescents smoking by analyzing the relationship between adolescents' lifestyles and smoking experiences and identifying influencing factors. Methods: Secondary data analysis was conducted using the 17th (2021) Youth Health Behavior Survey data, encompassing 54,848 students from 796 schools. Variables included general characteristics, smoking status, lifestyle habits, physical activity, sleep patterns, and stress perception. Frequency analysis was used to examine general characteristics, while further analysis employed frequency analysis and the Pearson Chi-square test to compare lifestyle differences based on smoking presence. Multinomial logistic regression analysis was employed to determine factors influencing smoking experience, with IBM SPSS Statistics 28 used for all analyses at a significance level of p<.05. Results: Analysis revealed with general characteristics that the group with smoking experience exhibited a higher proportion of male students (67.4%) compared to the non-smoking group (50.1%) (p<.001). Analysis revealed that the smoking group was more likely to skip breakfast (27.7%), not consume fruit (17.8%), and consume fast food more than three times daily (0.9%). Furthermore, a higher percentage of smokers engaged in 60 minutes or more of breathless physical activity (8.4%) seven times a week, reported insufficient fatigue recovery through sleep (21.6%), and experienced very severe normal stress (17.2%) (p<.001). Analysis of the relationship between lifestyle and smoking indicated increased likelihood of smoking with zero breakfast consumption (OR=1.759, p<.001) and increased fruit consumption (OR=1.921, p<.001), while zero fast food consumption decreased smoking likelihood (OR=0.206, p<.001). Adequate sleep-related fatigue recovery reduced smoking likelihood (OR=0.458, p<.001), whereas increased stress elevated it (OR=1.260, p<.05). Conclusion: Adolescents' lifestyle habits significantly correlated with their smoking experiences, highlighting the necessity of considering lifestyle factors in smoking prevention strategies. This study provides crucial insights for promoting healthy lifestyle changes to prevent smoking among youth.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.54-62
• /
• 2024

SICM (Scanning Ion Conductivity Microscopy) is a technique for measuring surface topography in an environment where electrochemical reactions occur, by detecting changes in ion conductivity as a nanopipette tip approaches the sample. This study includes an investigation of the current response curve, known as the approach curve, according to the distance between the tip and the sample. First, a simulation analysis was conducted on the approach curves. Based on the simulation results, then, several measuring experiments were conducted concurrently to analyze the difference between the simulated and measured approach curves. The simulation analysis confirms that the current squeezing effect occurs as the distance between the tip and the sample approaches half the inner radius of the tip. However, through the calculations, the decrease in current density due to the simple reduction in ion channels was found to be much smaller compared to the current squeezing effect measured through actual experiments. This suggests that ion conductivity in nano-scale narrow channels does not simply follow the Nernst-Einstein relationship based on the diffusion coefficients, but also takes into account the fluidic hydrodynamic resistance at the interface created by the tip and the sample. It is expected that SICM can be combined with SECM (Scanning Electrochemical Microscopy) to overcome the limitations of SECM through consecutive measurement of the two techniques, thereby to strengthen the analysis of electrochemical surface reactivity. This could potentially provide groundbreaking help in understanding the local catalytic reactions in electroless plating and the behaviors of organic additives in electroplating for various kinds of patterns used in semiconductor damascene processes and packaging processes.