• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.4
• /
• pp.285-289
• /
• 2000

This study suggests a rebar detection technique for simultaneous detection of size and cover of embedded reinforcement in concrete. The structure of the probe made in this study is somewhat different from commercial ones. This probe has three sensing coils. Rebar size and cover depth can be evaluated by detecting and analyzing the signal from them. Amplitude and phase variation of each coil in the probe was investigated using an impedance analyzer and the loci of transfer functions of the coils were analyzed. The locus of transfer function from the sensing coil positioned inside excitation coil was simple as well known, but the others from the coils outside excitation coil were not so. Actual experiment on rebar detection was performed with our probe and an eddy current test system for various rebar sizes and depths. The signal shape according to variation of cover depths showed the same tendency with the transfer function loci acquired by impedance analyzer. The different variation pattern of signal enabled to evaluate rebar size and cover depth simultaneously.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.16-21
• /
• 2006

Uneven ink transfer of a print can be traced to several causes such as an incomplete contact between the paper surface and ink film, a coarse pattern of a continuous ink film after transfer, uneven absorption, etc. Uneven ink transfer was studied in this points by the Tollenaar. Uneven distributions of printed density are reflected in low ${\ulcorner}m{\lrcorner}$ values of the print. Tollenaar's smoothness coefficient ${\ulcorner}m{\lrcorner}$ value was important factor that deciding printed quality which was easily obtain by densitometry. Limiting print density $D_{\infty}$ that obtained Tollenaar's formulation working as a influence factor at the printed quality. In this study, we obtained limiting print density $D_{\infty}$ and smoothness coefficient ${\ulcorner}m{\lrcorner}$ value of domestic newspapers and foreign newspapers. And we analyzed about properties of the newspaper. The result of this study, smoothness coefficient ${\ulcorner}m{\lrcorner}$ value and limiting print density $D_{\infty}$ showed the good results in the low porosity and low roughness newspaper. Datum which obtained by this study was used as printability factor for the quality control and improvement of domestic newspaper and wished to apply as a basic data for the domestic newspaper quality.

• Reproductive and Developmental Biology
• /
• v.33 no.1
• /
• pp.13-18
• /
• 2009

The aim of this study was to examine the microtubule distributions of somatic cell nuclear transfer (SCNT) and parthenogenetic porcine embryos. Porcine SCNT embryos were produced by fusion of serum-starved fetal fibroblast cells with enucleated oocytes. Reconstituted and mature oocytes were activated by electric pulses combined with 6-dimethlyaminopurine treatment. SCNT and parthenogenetic embryos were cultured in vitro for 6 days. Microtubule assembly of embryos was examined by confocal microscopy 1 hr and 20 hr after fusion or activation, respectively. The proportions of embryos developed to the blastocyst stage were 25.7% and 30.4% in SCNT and parthenogenetic embryos, respectively. The frequency of embryos showing $\beta$-tubulins was 81.8% in parthenogenetic embryos, whereas 31.3% in SCNT embryos 1 hr after activation or fusion. The frequency of the embryos underwent normal mitotic phase was low in SCNT embryos (40.6%) compared to that of parthenogenetic ones (59.7%) 20 hr after fusion or activation (p<0.05). The rate of SCNT embryos with an abnormal mitosis pattern is about twice compared to that of parthenogenetic ones. The spindle assembly and its distribution of SCNT embryos in the first mitotic phase were not different from those of parthenogenetic ones. The result shows that although microtubule distribution of porcine SCNT embryos shortly after fusion is different from parthenogenetic embryos, and the frequency of abnormal mitosis 20 hr after fusion or activation is slightly increased in SCNT embryos, microtubule distributions at the first mitotic phase are similar in both SCNT and parthenogenetic embryos.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.506-511
• /
• 2009

In order to improve the bacterial cellulose(BC) production yield, centrifugal and inclined centrifugal impellers were developed. A 6 flat-blade turbine impeller was used as a control system. The flow pattern in the fermenter and volumetric oxygen transfer coefficient($k_La$) of these fermentation systems were studied. Fermentations were carried out for the production of BC by G. hansenii PJK in a 2-L jar fermenter equipped with new impellers. Liquid medium was circulated from the bottom, through the cylinder of the impeller and to the wall. The volumetric oxygen transfer coefficients, $k_La$, of inclined centrifugal and centrifugal impeller systems at 100 rpm were 23 and 15% of the conventional turbine impeller system, respectively. However, the conversion of microbial cells to cellulose non-producing mutant decreased and this results in the increase in BC production at low rotating speed of impellers.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.9
• /
• pp.885-894
• /
• 2012

A numerical study of a microchannel steam methane reforming reactor has been performed to understand the characteristics of heat and mass transfer. The integration of Rh-catalyzed steam methane reforming and Pt-catalyzed methane combustion has been simulated. The reaction rates for chemical reactions have been incorporated into the simulation. This study investigated the effect of contact time, flow pattern (parallel or counter), and channel size on the reforming performance and temperature distribution. The parallel and counter flow have opposite temperature distribution, and they show a different type of reaction rate and species mole fraction. As the contact time decreases and channel size increases, mass transfer between the catalyst layer and the flow is limited, and the reforming performance is decreased.

• Geomechanics and Engineering
• /
• v.6 no.4
• /
• pp.359-376
• /
• 2014

Thermal conductivity of ground has a great influence on the performance of Ground Heat Exchangers (GHEs). In general, the ground thermal conductivity significantly depends on the density (or porosity) and the moisture content since they are decisive factors that determine the interface area between soil particles which is available for heat transfer. In this study, a large number of thermal conductivity experiments were conducted for soils of varying porosity and moisture content, and a database of thermal properties for the weathered granite soils was set up. Based on the database, a 3D Curved Surface Model and an Artificial Neural Network Model (ANNM) were proposed for estimating the thermal conductivity. The new models were validated by comparing predictions by the models with new thermal conductivity data, which had not been used in developing the models. As for the 3D CSM, the normalized average values of training and test data were 1.079 and 1.061 with variations of 0.158 and 0.148, respectively. The predictions became somewhat unreliable in a low range of thermal conductivity values in considering the distribution pattern. As for the ANNM, the 'Logsig-Tansig' transfer function combination with nine neurons gave the most accurate estimates. The normalized average values of training data and test data were 1.006 and 0.954 with variations of 0.026 and 0.098, respectively. It can be concluded that the ANNM gives much better results than the 3D CSM.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.923-932
• /
• 2011

Because of the instability of a flow pattern in the inlet transition square duct (hereinafter referred to as "transition duct") of a heat recovery steam generator (hereinafter referred to as "HRSG") in a combined cycle power plant, the Reynolds number in the first row of a tube bank is differs sharply from that in the sectional area of the transition duct. This causes differences in the heat flux in each tube in the tube bank. The computational fluid dynamics (CFD) predictions provide three-dimensional results for velocity, temperature, and other flow parameters over the entire domain of the duct and HRSG. A renormalization group theory (RNG) based k-${\epsilon}$�� turbulent model is used for obtaining the results cited in this study. A porous media option is used for modeling the tube banks and the number of transfer units method is used for determining the heat transfer characteristics. This study describes a comparison between the numerical simulation results and actual design output.

• Journal of Embryo Transfer
• /
• v.13 no.1
• /
• pp.77-86
• /
• 1998

A combined technology of transvaginal ovum pick-up(OPU) system with in vitro-oocyte manipulation technique can be used for improving reproductive efficiency in the cattle. The objective of this study was to establish a newly-conceived breeding program using OPU in the pregnant cows. The OPU trial was performed in pregnant cows every 10 days from 40 through 90 days of artificial insemination (Al), and number of follicles in ovary, number of retrieved oocytes and embryo development following in vitro-fertilization, were evaluated. Reduced number of follicles in the ovaries of pregnant cows was firstly detected from 70 days after A' and a significant (P<0.05) decrease in the follicle number (5.4 follicles /donor) was found at 90 days than at 40, 50, 60 and 80 days after Al (8.0~9.2). A similar pattern was also observed in the number of oocytes retrieved by OPU apparatus during experimental period. When retrieved oocytes were matured and inseminated in vitro with frozen bull semen, development of the oocytes to the blastocyst stage was not significantly affected by the retrieval time. Four embryos (morula or blastocyst stage) derived from oocytes retrieved from pregnant cows were nonsurgically transferred to four recipient cows on day 7 of estrus cycle. For the first time in Korea, three of four transferred embryos developed to live calves with normal physiological parameters. In conclusion, an effective breeding program employing pregnant cow can be developed by use of OPU trial and in vitro culture techniques of oocytes ; OPU system could be repeated in pregnant cows with no risk of abortion and viable offsprings were borne after transfer to the recipients.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.90-95
• /
• 2009

The wind is very important factor in forest fire spread. Flame spread has a change through wind pattern change in forest fire. In order to analyze the forest fire flame spread rate, change of flame tilt depending on wind may be considering first. This is be cause the flame spread rate varies by the flame tilt changed due to transfer of heat. Especially, as wind speed grow, flame gets closer to surface, heat transfer ratio increase, virgin fuel bed reaches ignition temperature more rapidly, and flame moves faster. This study deduces, through experiment and physical figure analysis, relations on the change behavior of flame tilt due to wind. The value of flame tilt angle calculated from the equation and the experiment value showed average error angle of $3.3^{\circ}$, which is relatively smaller than results of previous studies that used other coefficient. Froude number coefficient A can be calculated in the method provided in this research for estimation of flame tilt angle of virgin fuel bed with varying thermal properties. The research finding is expected to be applied to future studies on flame spread through numerical analysis of heat transfer.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.101-108
• /
• 2010

It is estimated that the elderly will constitute 24.3% of the entire Korean population in 2030, when about 7,125,000 baby boomers reach retirement age. Therefore, this aging phenomenon might be the most urgent issue facing Korean society. The baby boom generation shows a strong tendency to dispose of existing residences or move into new housing after retirement, thereby exerting enormous impacts on social and economic sectors as well as the housing market. Against this backdrop, this study aims to identify both factors and patterns behind baby boomer retirees' post-retirement housing transfer trends. To this end, a survey is undertaken here with respect to those baby boomers living in Gangnam-gu and Seocho-gu with actual housing transfer plans in the foreseeable future, and who can act as a practical consumer group for the future housing market. This study verifies baby boomers' diverse preferences for housing type. Their preference for apartment houses still remains high in every situation, and this has significant implications for changed preferences of other housing types considering that most of the survey respondents currently reside in apartment houses. According to the survey, there are more than 80 kinds of baby boomers' housing transfer patterns, which demonstrates that more than half of the survey respondents pursue different housing mobility plans. When it comes to the factors behind their housing selection, the baby boom generation shows a strong preference for physical factors. However, environmental and psychological factors gain more momentum under unfavorable circumstances, while social factors play a decisive role in their housing selection in categories such as 'couple/deteriorating health' and 'single/healthy'.