• 제어로봇시스템학회논문지
• /
• 제14권2호
• /
• pp.191-196
• /
• 2008

This paper proposes a cooling stop temperature control(CSTC) concept which aims at obtaining the uniform temperature and quality of the material along the longitudinal and lateral direction of the strip. The CSTC is designed using the experimental CCT(Continuous Cooling Transformation), TTT(Time Temperature Transformation) curves and the temperature control model by the heat transfer governing equation, and the temperature control simulator. The cooling pattern and the rolling speed can be solved by the CSTC. It is shown through the field test of the hot strip mill of POSCO that the phase transformation ratio of the high carbon steel is considerably improved by the proposed temperature control.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1201-1206
• /
• 2004

This paper deals with the numerical analysis of natural convection flow induced by the density inversion effect of water inside horizontal pipe. The numerical method is based on SIMPLE/PWIM in general coordinate for its wide applicabilities. The numerical tool was validated through the comparison with the previous results concerning the density inversion effect of water It is shown that the developed numerical tool could predict the flow pattern and the heat transfer phenomena qualitatively And it is also found that the density inversion effect of water has significant effects on the flow pattern.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.1956-1963
• /
• 2010

Studies on the development of various energy management programs and real-time bidirectional information infrastructures have been actively conducted to promote the reduction of power demands and CO2 emissions effectively. In the conventional energy management programs, the demand response program that can transition or transfer the power use spontaneously for power prices and other signals has been largely used throughout the inside and outside of the country. For measuring the effect of such demand response program, it is necessary to exactly estimate short-term loads. In this study, the power consumption patterns in both individual and group consumers were analyzed to estimate the exact short-term loads, and the relationship between the actual power consumption and seasonal factors was also analyzed.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.1-5
• /
• 2004

In the present study, the gas injection system based on air-water model was designed to investigate the flow characteristics of liquid phase. A PIV system was applied to analyze the flow pattern in a ladle which gas stated to rise upward from the bottom. Gas flow is one of most important factors which could feature a flow pattern in a gas injection system. As the gas injected into the liquid, the kinetic energy of bubble transfer to liquid phase and a strong circulation flow develops in the liquid phase. Such a flow in the liquid develops vortex and improve the mixing process. Due to the centrifugal force, circulation flow was well developed near both wall sides and upper region respectively. Increasing gas flow was helpful to remove dead zone but, weak flow zone still exists in spite of the increasement of gas flow rate.

• Journal of Communications and Networks
• /
• 제1권3호
• /
• pp.166-181
• /
• 1999

The object of this paper is to investigate the influence of antenna pattern on indoor radio channel characteristics. Different from previous works where this analysis was carried out at a fixed frequency using different antennas, in the present paper (where measurements were taken in a wide frequency range) the variation of the radiation pattern was caused by two factors: the change of the radiation pattern when the same antenna was used at different frequenicies and the use of different type of antennas. To carry out this analysis, frequency domain measurements of the indoor radio channel at 1 GHz, 5.5 GHz, 10 GHz and 18 GHz were collected. Measurements were taken using a network analyzer. Serveral re-alizations of the channel transfer function were obtained varying, for each measurement, the positon of the transmitter and keep-ing the receiver fixed. Estimate of the channel impulse response was obtained from the Inverse Fourier Transform (IFT) of the fre-quency response. The measurements were performed in an office enviroment with mostly metallic walls and inner separations. The obtained data were elaborated to obtain the power versus distance relationship, the Cummulative Distribution Functions(CDFs) of rms Delay Spread(DS) and of the 3 dB frequency correlation band-width. Finally, the 3 dB width of the frequency correlation func-tion has been empirically related to the inverse of the rms DS of the impulse response.

• 전기학회논문지
• /
• 제62권4호
• /
• pp.502-509
• /
• 2013

It presents an efficient switching pattern, which expects a reduction of switching losses in a cascaded H-bridge PWM multilevel inverter. By the proposed switching scheme, the lower H-bridge module operates at low frequency of 60[Hz] because it assigns to transfer most load power. The upper H-bridge module operates at high frequency of PWM switching to improve THD of output voltage. The proposed switching pattern applies to cascaded H-bridge multilevel inverter with PD, APOD, bipolar, and unipolar switching methods. By computer-aided simulations, we verify the validity of the proposed switching scheme. Finally, we prove that the proposed PD and APOD switching patterns are better than those of the conventional one in efficiency.

• 한국운동역학회지
• /
• 제27권3호
• /
• pp.181-187
• /
• 2017

Objective: The aim of the study was to compare & analyze on the variations of ground reaction force during ascending and descending of bus stair. Method: Simulated wooden stair of bus (raiser: 37.66 cm, width: 109 cm, tread: 29 cm) and GRF system (AMTI-OR-7/ AMTI., USA) was set up within experimental room. Adult female (n=8) performed ascending & descending of simulated bus stair, and variables analyzed consisted of TT (transfer-time), PVF (peak vertical force), LR (loading rate), DR (decay rate), CV (coefficient of variation) and AI (asymmetry index). Sample data from GRF cut off at 1,000 Hz. Results: TT showed shortest variation at phase 1 during descending, but longest variation at phase 1 during ascending of stair. PVF19 (Fz2, 100%) showed large pattern during descending than that of ascending, but rather showed small pattern during ascending of stair in case of PVF2 (Fz4). LR showed larger pattern during descending than that of ascending, but rather during ascending of stair in case of DR. Variation of CV (%) did not show difference between LR and DR, but showed higher possible occurrence of variation during descending of stair. Also AI (%) showed higher index during ascending than that of descending of stair. Conclusion: Because introduction of lowered bus stair has various realistic problems, if lined up at designated bus stopage exactly, rather can solve problems of inconvenience, reduce impulsive force and secure a stability of COG during ascending & descending of stair.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.217-224
• /
• 2002

It is very important to measure and visualize the changes in the physical properties of fluid flow because this is the foundation of measurement techniques used in aerodynamics, heat transfer, plasma diagnostics, and stress analysis of transparent models. The optical methods are advantageous over probe-based techniques in the optical methods are of high speed, non-contact and are capable of providing full-field results with high spatial resolution. Therefore we propose the electronic speckle pattern interferometry(ESPI) that gives us a solution to overcome those limitations. In this paper the experimental results show qualitative and quantitative visualization of changes in the physical properties of the candle and alcohol lamp with 3D plotting. And we obtained the refractive index, mass density and temperature distribution of fluids. The results clearly show the process of flow phenomena and give the feasibility of quantitative interpretation of gasdynamics.

• The Journal of Korean Physical Therapy
• /
• 제17권1호
• /
• pp.108-122
• /
• 2005

The gait training strategy in very important things for central nervous system(CNS) injury patients. There are many method and strategy for regaining of the gait who had CNS injury. A human being has central pattern generator(CPG) is spinal CPG for locomotion. It is a neural network which make the cyclical patterns and rhythmical activities for walking. Sensory input from loading and hip position is essential for CPG stimulation that makes the central neural rhythm and pattern generating structure. From sensory input, the proprioceptive information facilitate proximal muscles that controlled in voluntarily from cortical level and visual and / or acoustical information facilitate distal muscles that controlled voluntarily from subcortical level. Gait training method can classify that is functional level and structural level. Functional level includ level surface gait, going up and down the stair. It is important to facilitate a guide tempo in order to activate the central pattern generators. During the functional test or functional activities, can point out the poor period in gait that have to be facilitate in structural level. There are many access methods with patient position and potentiality. The methods are using of rhythmic initiation, replication and combination of isotonic with standing position. Clinically using it on weight transfer onto the stance leg, loading response, loading response and pre-swing, terminal stance, up and downwards stairs.

• 한국식물병리학회지
• /
• 제3권3호
• /
• pp.168-173
• /
• 1987

도열병균(Pyricularia oryzae) 균사체의 esterase 동위효소 pattern이 배양조건에 의하여 변화되는가를 $10\~25\%$ polyacrylamide gradient slab gel을 사용하여 알아보았다. 배양기간에 따라 배양 24일까지 동위효소 pattern은 변하지 않았지만 특징 band의 효소량에는 차이가 있었다. 탄소원(glucose, fructose, maltose, sucrose, starch), 단포자분리균주간, 계대배양 및 세포벽재생균주간의 동위효소 pattern은 변함이 없었다.