• 오토저널
• /
• 제4권2호
• /
• pp.58-68
• /
• 1982

It is well known to diesel engineers that the heat release pattern is one of the most important factors affecting engine performance. Thorough research in heat release pattern has materially helped the progress in high-speed diesel engine development . This paper is based on the research conducted at KAIST and Daewoo Heavy Industry last year. The purpose of this paper is to determine the heat release pattern in combustion chamber of MAN M type, the famous low-noise engine. Thermodynamic cycle simulation was performed using Whitehous-Way's heat release pattern with modified coefficients and Annand's heat transfer model. Instantaneous temperature and pressure of gas in cylinder could be determined by the numerical solution of simultaneous equation of mass conservation, equation of energy conservation, and state equation of ideal gas. Calculated results were compared with measured values in some details emphasizing upon the factors affecting rate of heat release. The agreement was fairly good and revealed why M type should have lower burning velocity at the early part of combustion in spite of high injection rate. Additional results by parametric studies were given in relation to fuel injection conditions for further application to engine development.

• Korean Chemical Engineering Research
• /
• 제59권2호
• /
• pp.276-280
• /
• 2021

왕복 요동 교반조의 액체 표면에서의 산소 전달 속도에 대해 연구하였다. 왕복 요동 교반조의 소요 동력은 선회요동 교반조와는 달리 요동 주파수에 비례하지 않았으며, 교반조 내의 유동양상이 선회요동의 선회류와는 다른 좌우 물결류인 관계로 어떤 진동수에서 갑자기 액면이 크게 흔들리며 움직이는 양상을 보이며. 3 s-1 이상의 요동 주파수부터는 소요 동력이 선회요동 교반조보다 적어지는 등 요동 주파수가 소요 동력에 미치는 영향은 매우 복잡하였지만, 생성되는 회전류의 범위에서의 왕복 요동 교반조 소요 동력은 회전 요동 교반조에 대해 보고된 식으로 상관시킬 수 있었다. 왕복요동 교반조에서의 kLa (물질이동 용량계수) 역시 교반 소요 동력이 단순한 형태로 소비되지 않았기 때문에 주파수의 증가에 따라 선형으로 증가하는 선회요동 교반조의 kLa와는 달리 복잡한 형태로 증가하였다. 왕복요동 교반의 kLa가 선회요동 교반의 kLa 보다 컸으며, kLa 값이 커질수록 그 차이도 급격히 커졌다. 결과적으로 왕복 요동에서의 산소 전달 속도는 회전 요동보다 컸으며, 단위 부피당 소요 동력과 상관시킬 수 있었다.

• 한국수정란이식학회지
• /
• 제23권3호
• /
• pp.133-139
• /
• 2008

DNA methylation is one of the reasons for poor survival of clone animals. The OCT-4 gene is essential for maintaining pluripotency of embryonic stem (ES) cells and early embryos. We previously reported that the 5'-promoter region of Oct-4 gene was a target of DNA methylation and the methylation status was changed variously during embryonic development in bovine. The study conducted to examine the expression and methylation pattern of tissue-dependent differentially methylated region (T-DMR) of Oct-4 gene in bovine somatic cell nuclear transfer (SCNT) and in vitro fertilization (IVF) blastocysts. The Oct-4 gene expression was evaluated by RT-PCR and fluorescence immunocytochemistry. The methylation pattern of T-DMR was analyzed using restriction mapping and bisulfite sequencing methods. The Oct-4 transcripts were highly expressed in IVF, while they were not expressed in SCNT. The Oct-4 protein was not detected or expressed at very low level in SCNT, the intensity of Oct-4 protein, however, was strong in IVF. On the other hand, the T-DMR of Oct-4 gene was hypermethylated in SCNT compared to that of IVF. These results suggested that expression and the failure of demethylation of Oct-4 gene was closely associated with incomplete development of SCNT embryos.

• Korean Journal of Acupuncture
• /
• 제34권3호
• /
• pp.109-115
• /
• 2017

Objectives : Many researches have studied warm needling technique to standardize its treatment by temperature measurement and material differences in the effectiveness. The purpose of this study is to compare the temperature changes of the acupuncture needle shaft during the combustion process of the moxa stick to determine the heat transfer pattern of the warn needling. Methods : A moxa stick($7{\times}8mm$) was connected to one side of the needle shaft using a stainless steel needle(ø 0.3 mm, ø 0.5 mm, ø 0.8 mm, shaft length 40 mm) with the needle handle removed. During the warm needling, temperature changes of the needle shaft were observed with an infrared camera(Flir E30) and an infrared thermometer(TESTO 845). Results : In the normal condition, heat transmit of needle shaft increased at spots 10 mm and 25 mm below the moxa stick. The amount of heat transmit increased with the diameter of needle shaft. However, when the heat shield was installed to exclude radiant heat from the moxa stick, heat transfer was less at 10 mm below the moxa stick and no temperature change was observed at 25 mm below the moxa stick. Heat transfer by warm needling does not reach the end of needle shaft even in ø 0.8 mm needle. Conclusions : It is suggested that the radiant heat of moxa stick results in the heat transmit of acupuncture needle shaft. Thus, radiant heat transmit must be considered as one of the heat transfer characteristics of the warm needling.

• 한국실내디자인학회논문집
• /
• 제22권4호
• /
• pp.167-177
• /
• 2013

The environmental considerations should be taken into full consideration in order to make the use of ground space as comfort and efficient as that of ground space. The visual environmental factors which provide visual informations in underground spaces where the environmental information can be acquired only by the surroundings expand their role as affordance for wayfinding. This study focuses on the visual performance evaluation of wayfinding factors on the subway transfer station platform and aisle as major space for movement in four subway transfe stations and analyzes the material, pattern, color, and lighting provided by the visual environment in underground space as directional marked label, regional differentiation and sign system. The results of this study comes are as follows. First, As to the directional marked label at the subway platform and transfer aisle, following patterns are colors, finishing materials and lighting for the sake of safety and convenience, And regional differentiation, following colors are patterns for the space division. Finally sign system which practically provides the most information, however, it is most insufficient to be a space-preception element. Second, According to the type of platform structures, such as an island platform and a separate platform, the main areas of and necessity for the space-perception elements may bring about changes. Third, these four stations that has been analyzed for this study, lighting, compared with color, finishing material and pattern, has been highly insufficient to be a perception element.

• 한국항행학회논문지
• /
• 제15권2호
• /
• pp.326-333
• /
• 2011

본 연구는 공간적 정보의 청각적 제시 가능성을 확인하기 위해 머리전달함수(head-related transfer function: HRTF)를 통해 생성된 3D사운드를 가상공간상 대상 위치의 직각형태(orthogonal pattern), 혹은 대각형태(diagonal pattern)의 조합으로 배열하여 투시장치(See-Through HMD)로 증강현실을 경험하고 있는 사용자 과제수행의 정확성과 반응시간을 측정하였다. 본 연구에서 실시한 실험들의 결과를 종합하면, 3D 사운드로 대상의 위치 정보를 제시할 때는 사용자로부터의 방향은 직각으로 위치시키는 정보 배열이 정확성을 확보할 수 있고, 또한 가상적 깊이를 이용하여 정보를 배열하는 것도 그 깊이를 구분할 수 있으나 정확성이 떨어짐을 확인하였다. 특히 보다 현실적인 과제 상황에서의 수행을 비교하기 위해 설계된 이중과제(dual task)를 하는 동안 제시된 청각자극 조건에서도 이러한 정확성과 반응시간의 차이가 마찬가지로 나타났다. 이런 결과를 통해 3D사운드로 대상의 위치와 같은 공간적 정보를 제시 가능한 최적의 배열 형태를 제안하는데, 이는 어떤 패턴으로 정보를 구조화하여 제시하느냐에 따라 청각적 위치 정보 제시의 성공 여부가 결정된다는 것을 의미한다.

• 정보처리학회논문지A
• /
• 제12A권2호
• /
• pp.87-94
• /
• 2005

패턴 매칭(Pattern Matching)은 네트워크 침입방지 시스템에서 가장 중요한 부분의 하나며 많은 연산을 필요로 한다. 날로 증가되는 많은 수의 공격 패턴을 다루기 위해, 네트워크 침입방지 시스템에서는 회선 속도로 들어오는 패킷을 처리 할 수 있는 다중 패턴 매칭 방법이 필수적이다. 본 논문에서는 현재 많이 사용되고있는 네트워크 침입방지 및 탐지 시스템인 Snort와 이것의 패턴 매칭 특성을 분석한다. 침입방지 시스템을 위한 패턴 매칭 방법은 다양한 길이를 갖는 많은 수의 패턴과 대소문자 구분 없는 패턴 매칭을 효과적으로 다룰 수 있어야 한다. 또한 여러 개의 입력 문자들을 동시에 처리 할 수 있어야 한다. 본 논문에서 Shift-OR 패턴 매칭 알고리즘에 기반을 둔 다중 패턴 매칭 하드웨어 가속기를 제시하고 여러 가지 가정 하에서 성능 측정을 하였다. 성능 측정에 따르면 제시된 하드웨어 가속기는 현재 Snort에서 사용되는 가장 빠른 소프트웨어 다중 패턴 매칭 보다 80배 이상 빠를 수 있다.

• 한국정밀공학회지
• /
• 제28권10호
• /
• pp.1123-1130
• /
• 2011

The pattern shape engraved on the gravure printing roll is one of the most important factors influencing ink transfer. This study focuses on the relations between dot geometry engraved on gravure printing roll and the ink transfer during the gravure printing process. The influence of dot width on printed patterns will be demonstrated. Results reveal that as the width of a dot on the printing roll increases, the ink transfer rate also increases. But over a certain size of width, surface uniformity began to recede. Therefore, proper dot geometry on the printing roll should be decided to guarantee good printing quality according to printing conditions and expected performance of the electronic devices.

• 한국연초학회지
• /
• 제29권2호
• /
• pp.118-124
• /
• 2007

GRLs(Guidance Residue Levels) of agricultural chemicals for tobacco are recommended by the CORESTA Agro-Chemical Advisory Committee guide. In the GRLs list, organochlorine group is one of pesticides commonly used on tobacco cultivation. In this model study, the quantitative correlation in the transfer rate of pesticide residue into tobacco smoke by spiking of organochlorine pesticides to cigarette and pyrolysates were investigated. The spiking concentration referred to the range of GRLs list and the organochlorine pesticides in mainstream smoke were analyzed by GC-MS. For the understanding of the composition variation versus temperature, the behavior of pesticides was investigated by pyrolysis-gas chromatography-mass spectrometry(Py-GC-MS). In this study, the transfer rate of pesticide residue into tobacco smoke at four different spiking concentration and the composition of pyrolysates were analyzed differently. At $10\;{\mu}g/cig$ spiking concentrations, the organochlorine pesticides were transferred into tobacco smoke in $0.02\;{\sim}\;10.19\;%$ each of component and the most of pesticides were pyrolyzed during smoking. It was found that the decomposition compounds from organochlorine pesticides were mainly composed of oxygenated and nitrogenous compounds. This study could estimate that the transfer rate of pesticides into tobacco smoke is very small amount.

• 한국자동차공학회논문집
• /
• 제4권1호
• /
• pp.187-197
• /
• 1996

Many investigations have been made to determine the pressure drop and heat transfer characteristics for single phase flow in tape generated swirl flow. But few studies have been carried out to investigate the heat transfer in two component, two phase swirl flow with non-boiling. An experimental study has been conducted to determine the effects of tape twist ratios on two phase convective heat transfer coefficients, pressure drop, and void fraction distribution in a non-boiling, air-water, two phase flow. The flow conditions were both swirl and non swirl flows. The internal diameter of the test section is 42.5mm. The tape twist ratios of pitch to diameter ratio varied from 4.0 to 10.6. The heating conditions were isothermal and nonisothermal. The flow patterns identified with experiments were bubbly, bubbly-slug, slug, and slug-annular flow in up-flow. This study has concluded that no significant difference in void fraction distribution were observed both isothermal and nonisothermal conditions, the pressure drop for two phase flow with twisted tape swirler increase as the tape twist ratio decrease, and that values of two phase heat transfer coefficient increase when the tape twist ratio decreases.