• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.361-364
• /
• 2011

In this paper, This work demonstrates a experimental evaluation for vehicle road noise NVH performance from the component-level NVH measurements of Tire. The power unit noise from tire emitted by cars has been reduced. It has been found that tire noise dominates noise produced by the power train when vehicles are driven at high constant speed. Therefore tire pattern noise is affected by pattern and vehicle and transmission loss. Tire noise mechanism is generated by several mechanisms. The sound of tire can propagate either through the air or through the structure of vehicle. Pattern noise is the result of pressure variations through the air to the interior side of vehicle. Especially, smooth asphalt, the periodicity of tread design, groove depth is important factor, which have an influence on the reduction of tire pattern noise.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.165-166
• /
• 2006

Surface pattern of tribological applications is an attractive technology of engineered surface. Therefore, friction reduction is considered to be necessary for improved efficiency of machines. This study investigated the effect of friction property fur angles of micro-scale crosshatch grooved surface pattern on bearing steel flat mated with pin-on-disk. We obtain sample which can be fabricated by photolithography process. We discuss friction property depend on an angle of cross-hatch grooved pattern. We can verify the lubrication mechanism as a Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter under the lubrication condition. It was found that the friction coefficient was related to angle of crosshatch on surface, even when surface pattern was the same density.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.110-116
• /
• 2011

The current study investigated the friction property of angle and width effect for micro-scale grooved crosshatch pattern on SKD11 steel surface against bearing steel using pin-on-disk type. The samples fabricated by photolithography process and then these are carry out the electrochemical etching process. We discuss the friction property due to the influence of a hatched-angle and a width of groove on contact surface. We could be explained the lubrication mechanism for a Stribeck curve. So It was found that the friction coefficient depend on an angle of the crosshatch on contact surface. It was thus verified that micro-scale crosshatch grooved pattern could affect the friction reduction. Also, it is play an important a width of groove to be improved the friction property. I was found that friction property has a relationship between a width and an angle for micro-grooved pattern.

• 환경영향평가
• /
• 제33권4호
• /
• pp.155-163
• /
• 2024

연구목적은 오픈스페이스 토지이용 공간패턴이 도시 열저감 관점에서 어떤 의미를 갖는지 토지이용 시나리오를 이용하여 가능성 수준에서 살펴보는 것이다. 연구방법은 다음과 같다: (1) InVEST Urban Cooling Model을 이용, 5개 토지이용 시나리오별 Cooling Capacity Index 산출, (2) Guidos Spatial Pattern Toolbox를 사용, 토지이용 시나리오별 각각의 오픈스페이스 Entropy와 형태학적 공간패턴 산출, (3) InVEST 결과값과 Guidos 결과값들의 Spearman rank correlation analysis. 연구결과는 다음과 같다. Cooling Capacity Index와 오픈스페이스 면적비 순위 상관성은 보통이며(rho=0.50), 그 외 지표들은 낮은 것으로 나타났다. 이는 도시 열저감 관점에서는 오픈스페이스 총량만이 큰 의미를 가질 가능성이 있으며, 그 외 오픈스페이스 입지 공간패턴은 도시 열환경 관리 관점에서 큰 의미는 없을 수 있다는 가능성이 관찰되었다.

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.185-192
• /
• 1995

In this study, very fine photoresist pattern was examined using the image reversal process. And very fine photoriesist pattern (less than 0.2um) was obtsined by optimizing the exposure and reversal baking condition of photoresist. The produced pattern does not show the loss of thickness, and has a sparp negative edge profile. also, the ion implanted 0.25um T-shaped gate MESFET was fabricated using this resist pattern and the directional evaporation of gate metal. The fabricated MESFET has the maximum transconductance of 302 mS/mm, and the threshold voltage of -1.8V, and the drain saturation current of this MESFET was 191 mA/mm.

• 대한기계학회논문집A
• /
• 제33권8호
• /
• pp.786-792
• /
• 2009

Topology optimization is to find the optimal material distribution of the specified design domain minimizing the objective function while satisfying the design constraints. Since the genetic algorithm (GA) has its advantage of locating global optimum with high probability, it has been applied to the topology optimization. To guarantee the structural connectivity, the concept of compliance pattern is proposed and to improve the convergence rate, small number of population size and variable probability in genetic operators are incorporated into GA. The rank sum weight method is applied to formulate the fitness function consisting of compliance, volume, connectivity and checkerboard pattern. To substantiate the proposed method design examples in the previous works are compared with respect to the number of function evaluation and objective function value. The comparative study shows that the compliance pattern based GA results in the reduction of computational cost to obtain the reasonable structural topology.

• Tribology and Lubricants
• /
• 제24권6호
• /
• pp.368-373
• /
• 2008

This paper will investigate the friction characteristics of a 100m Hexagonal Array, Micro-scale Dimple Pattern, on bearing steel. These characteristics are researched by utilizing a pin-on-disk wear test machine, under various test conditions. The reduction of friction is a necessary requirement for the improved efficiency of this machine. As the speed increases, there is a decrease in the effect of the dimple of friction characteristic, with substantially little change to density. Conversely, as the load increases, the dimple pattern grows larger, resulting in a difference in the texture of these two components. At a dimple density of 10% the friction characteristic is easily demonstrated, with a consistent change in both speed and load.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권3호
• /
• pp.11-18
• /
• 2004

In this paper, the classification of artificial defects in semiconductor packages is studied by using pattern recognition technology. For this purpose, the pattern recognition algorithm includes the user made MATLAB code. And preprocess is made of the image process and self-organizing map, which is the input of the back-propagation neural network and the dimensionality reduction method, The image process steps are data acquisition, equalization, binary and edge detection. Image process and self-organizing map are compared to the preprocess method. Also the pattern recognition technology is applied to classify two kinds of defects in semiconductor packages: cracks and delaminations.

• 한국전문물리치료학회지
• /
• 제28권1호
• /
• pp.13-17
• /
• 2021

A normal range of motion is essential for performing activities of daily living. The capsular pattern is the proportional motion restriction in range of motion during passive exercises due to tightness of the joint capsule. Although the capsular pattern is widely referred to in clinical practice, there is no scientific evidence to support the concept. In this review, the appropriateness of the capsular pattern for evaluation of joint pathology was assessed. In the Textbook of Orthopaedic Medicine written by Cyriax, the capsular pattern did not specify how much reduction in angular motion is considered motion restriction. As the definition proposed initially was unclear, different methods have been used in previous studies investigating capsular pattern. In addition, the capsular pattern described all the major joints of the human body, but only the hip joint, knee joint, and shoulder joint were studied in experimental studies. Sensitivity and specificity were reported in one study and were meaningful in specific pathologies (loss of extension to loss of flexion). There was no consensus on the reliability and validity. In summary, the capsular pattern suggested by Cyriax or Kaltenborn is not supported or applies only to certain conditions. Various components around a joint complement each other and provide stability to the joint. It is recommended that the therapist perform multiple assessments rather than rely on a single assessment when evaluating joints.

• 한국환경과학회지
• /
• 제16권2호
• /
• pp.197-202
• /
• 2007

Formaldehyde is a typical indoor air pollutant that has numerous adverse health problems in modern living conditions. Phytoremediation that use plants to remove contaminants from polluted media can be applied to improve indoor air quality. Two sets of experiments; 1) two rooms in newly built auditorium and 2) a bed room in 2-year-old apartment; were performed to investigate plant effects on indoor formaldehyde concentration. It was observed from the experiments that plant can help decontaminating formaldehyde at low concentration level (0.1 ppm) but the effects decreased considerably at hish concentration (1ppm). The purification effects of indoor plant also showed the periodic pattern due to its physiological activity. More purification was observed as increasing plant density in the bed room but the formaldehyde concentration returned the original concentration level in two days after removing plants. It was suggested from the results that air purification using plants is an effective means of reduction on indoor formaldehyde level, though, reduction of source is highly desirable when the concentration level is high. The results also suggest that introducing supplementary purifying aids and/or efficient ventilation could be considered due to periodic removal pattern of plant.