• Journal of Life Science
• /
• v.19 no.5
• /
• pp.684-687
• /
• 2009

Xanthomonas arboricola pv. pruni, the causal agent of bacterial shot holes in stone fruits, was known to have a low population diversity. To investigate the genetic characteristics of X. arboricola pv. pruni isolated in Korea, three strains which have identical 16S rDNA sequences - including type strain (LMG852), Japanese isolate (MAFF301420) and Korean isolate (XWD1) - were analysed based on the nucleotide sequences of three DNA regions and RAPD pattern. No sequence diversity among the three strains was found within the ITS, glnA and atpD gene sequences. However, five of 756 nucleotides of the atpD gene determined (accession number FJ429319) were different from those of the French strain available from the Genbank database. RAPD analyses performed with 40 different arbitrary primers revealed that two strains isolated from Korea and Japan showed similarity in their band patterns distinguished by type strain. These results suggest that Korean and Japanese strains are very close and belong to a population with a low genetic diversity, and might have a different origin from strains found in West Europe.

• Physical Therapy Korea
• /
• v.20 no.1
• /
• pp.18-27
• /
• 2013

The purpose of this study was to compare the ring lock type knee-ankle-foot orthosis (KAFO) with newly developed 4-bar linkage KAFO on the gait characteristics of persons with poliomyelitis clinically. This 4-bar linkage is the stance control type KAFO which provide the stability during stance phase and knee flexion during swing phase. Two subjects participated in this study voluntarily. We provided the customized 4-bar linkage KAFO then asked the subjects to walk in level surface and stairs under the two different KAFO conditions. The characteristics of gait in the persons with poliomyelitis were evaluated using a 3D motion analysis system and force plate. Additionally 6 minute walk test for physiological cost index were conducted using pulse oximeter to measure the energy consumption. In the results of this study, the differences of 4-bar linkage KAFO compared with ring lock type KAFO are as follows: (1) Walking speed, stride length, and step length on level increased in subjects, (2) The gait symmetry was improved by generated knee flexion and decreased pelvic external rotation on level and stairs walking, (3) Decreased vertical excursion of center of mass and pelvic elevation during swing phase was decreased on level, (4) Knee extension moment, hip flexion moment, hip and knee internal rotation moment of non-braced limb were decreased on level walking, (5) Walking speed in 6-minute walk test was increased and physiological cost index was decreased. These findings indicate that 4-bar linkage KAFO compared with ring lock type KAFO is effective in enhancing pattern, endurance, and energy consumption in level surface and stairs walking.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.5
• /
• pp.43-52
• /
• 2014

It becomes to be essential for firms to build up collaboration ecosystem with diverse entities and to be common for firms to absorb knowledge from external environment for their innovation. Companies try to transfer technological or knowledge asset to other firms through open innovation. The purpose of this research is to suggest the role of universities in University-Industry Collaborations besides research collaboration and we focus on the role of university to strengthen the regional business ecosystem network. For this research, we analyze a specific UIC(University Industry Collaboration) program called as "Business Clinic Day" which provides a consulting service for firms, especially, SMEs with a specific problem by a group of consultants including CEOs, professors, and heads of regional public or private service providers. Then we studied how the business network has changed after the program with network analysis. Also, we try to find out the main pattern of network structure extension of business ecosystem with interview. This study illustrates that changing types of network are formed between university and SMEs by clinic day. The result shows that not only new role as a network promoter, but also the partner as a technology-provider in the regional business ecosystem.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.219-235
• /
• 2012

Objective: The aim of this study is to analyze the change characteristics of boys among the ages of 13 and 18 years. This study is based on the $4^{th}$ to the $6^{th}$ national anthropometric survey(Size Korea) data. Background: Many changes can affect the body characteristics compared withthe past. The significant changes were shown in Pepsi generation according to the report of national anthropometric survey of Korea 1997. Method: The subjects of the survey were 1,899 boys of the $4^{th}$ Size Korea, 1,587 boys of the $5^{th}$Size Korea and 2,317 boys of the $6^{th}$ Size Korea, who were from 13 to 18 years old. The change characteristics were analyzed withanthropometric measurements, height index value and proportion. Results: Stature was increased in 17~18 years old age group of the $5^{th}$ and the $6^{th}$ Size Korea and height items of the lower body showed the tendency to increase as the $6^{th}$ Size Korea over the time. In the case of circumference items, the tendency to increase in the $5^{th}$ and the $6^{th}$ Size Korea was observed. If the $5^{th}$ and the $6^{th}$ Size Korea were compared, there were no changes of other circumference items but chest circumference of the $6^{th}$ Size Korea was decreased in comparison with the $5^{th}$ Size Korea. Waist breadth(natural indentation) was increased in the $6^{th}$ Size Korea in spite of chest breadth was decreased in the $5^{th}$ and the $6^{th}$ Size Korea. And shoulder length, biacromion length and bishoulder length were decreased. The proportion of chest circumference, abdominal extension circumference and hip circumference to waist circumference and the proportion of chest breadth to waist breadth(natural indentation) showed the tendency to decrease as the $6^{th}$ Size Korea over the time. Conclusion: There was no change of stature excluding 17~18 years old. Circumference items showed tendency to increase as the $6^{th}$ Size Korea over the time. Shoulder and chest breadth became narrow. The somatotype changed to board chest with narrow waist in comparison with the previous. Application: In this way, the body size of 13~18 years' old boys changes. If these change characteristics reflects to the school uniform design, research for the pattern development, and etc., these will be able to improve fit and satisfaction of clothes.

• Journal of Korean Society of Transportation
• /
• v.32 no.1
• /
• pp.1-12
• /
• 2014

The tier 3 methodology used in estimation of greenhouse gas emissions from road sectors is based on mileage data. However, such data can neither accurately represent the mileage of regional unit nor have sufficient integrated data reflecting the characteristics by region, vehicle type, fuel type and road type. Such estimation of greenhouse gas emissions is not reliable. Accordingly, the purpose of this study is, firstly to accumulate activity data based on distance traveled which enables us to accurately estimate the amount of green gas emitted by regional unit(emission point), and secondly, to develop a methodology for estimation of greenhouse gas emissions using these data. To do this, the study utilizes the mileage data of Korea Transportation Safety Authority(TS), statistics of registered motor vehicles, statistical yearbook of traffic volume from the Ministry of Land, Infrastructure and Transport(MLIT), the Korea Transport Database of the Korea Transport Institute(KOTI), and average road speed by local government. Methodology for estimation by local government level(emission point) is meaningful, because it reflects traffic pattern data including flow in and out and internal traffics. Finally, to verify the methodology presented in this study, it is applied to Seoul. Both greenhouse gas estimates, one by multiplying the average mileage and the number of registered vehicles and the other by multiplying traffic volume and road extension, are less than the amount estimated by the methodology presented in this study.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.2
• /
• pp.183-190
• /
• 2015

Objective : Walking with a Material handling is an activity frequently undertaken by agricultural workers in Korea, due to the nature of their work. This study aimed to investigate differences in biomechanical variables according to the mechanical alignment of the lower limbs when walking with a heavy load, and to use this as basic data in the design of various working environments to reduce the skeletomuscular burden on the knee joint. Method : The study subjects comprised of 22 right-foot dominant adult men and women aged between 20 and 23 years. The subjects were divided into a varus or valgus group according to the mechanical alignment of the lower limb by using radiographic findings. The subjects walked without any load and with a load of 10%, 20%, or 30% of their body weight held in front of them. The Kwon3d XP program was used to calculate biomechanical variables. Results : The flexion/extension moment of the knee joint showed a decreasing trend with increased load, irrespective of the mechanical alignment of the lower limb, while the varus group did not show normal compensatory action when supported by one leg at the point of maximum vertical ground reaction force. In addition, in terms of the time taken, subjects showed no difficulties in one-foot support time up to 20%/BW, but at 30%/BW, despite individual differences, there was an increase in single limb. The increased load resulted in a decrease in the ratio of standing phase to ensure physical stability. The valgus group showed a trend of increasing the stability of their center of mass with increasing load, through higher braking power in the early standing phase. Conclusion : In conclusion, although there was no statistical difference in biomechanical variables according to the mechanical alignment of the lower limbs, the varus group showed a more irregular walking pattern with a Material handling than the valgus group, partially proving the association between lower limb alignment and walking with a Material handling.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.2
• /
• pp.75-83
• /
• 2008

The purpose of this study was to evaluate the correlation between joint moment and joint position angle according to the different walking speeds. According to the different walking speeds(1.5m/s, 1.8m/s, 2.1m/s), experiments were terminated by 8 male subjects. In conclusion, 1. The peak extensor moment of knee joint increased by increasing walking speed, however, walking speed didn't have an effect on peak flexor and abductor moment of knee joint. 2. The position angle of knee joint increased movement of flexion, but other position angles of knee joint didn't have difference when the peak extensor moment generated. 3. The peak joint moment of hip significantly increased in extension, flexion and abduction by increased walking speed. 4. The hip position angle showed more flexible at the hip peak flexor/extensor moment generated. 5. The co-ordination pattern between peak knee joint moment and knee position angle were mathematically modeled by using a least square method. We could get the high level value of R2. We expect to apply this results for evaluating the physical faculty of knee joint.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.503-518
• /
• 2003

Statement of problem : There have been previous studies about considerable variations in machining accuracy and consistency in the implant-abutment-screw interfaces. Purpose : The purpose of this study was to evaluate the machining accuracy and consistency of implant/abutment/screw combinations on two randomly selected implants from each of four manufactures. Material and methods : In this study, screws were respectively used to secure a cemented abutment, to a hexlock implant fixture ; teflon coated titanium alloy screw(Torq-Tite) and titanium alloy screw in Steri--Oss system, gold-plated gold-palladium alloy screw(Gold-Tite) and titanium alloy screw in 3i system gild screw ana titanium screw in AVANA Dental Implant system, and titanium screws in Paragon System. The implants were perpendicularly mounted in polymethyl methacrylate autopolymerizing acrylic resin block(Orthodontic resin, Densply International Inc. USA) by use of dental surveyer. Each abutment screw was secured to the implant with recommended torque value using a digital torque controller. Each screw was again tightened after 10 minutes. All samples were cross sectioned with grinder-polisher unit(Omnilap 2000 SBT Inc) after embeded in liquid unsaturated polyester (Epovia, Cray Valley Inc) Results : There were the largest gaps in the neck areas of screws in hexagonal extension implants which were examined in this study. The leading edge of the abutment screw thread (superior surface) was in contact with the implant body thread, and the majority of the contacting surfaces were localized to the middle portion of the mating threads. Considerable variation in the contacting surfaces was noted in the samples evaluated. Amounts of contact in the abutment screw thread were larger for assemblies with Gold-Tite screw, gold alloy screw. Torq-Tite screw than those with titanium screws. The findings of intimate contact between the screw and screw seat were seen in all samples, regardless of manufacturers. However, microgap between the head and lateral neck surface of the screw and the abutment could be dectected in all samples. The findings of intimate contact between the platform of the implant and the bottom of the abutment were consistent in all samples, regardless of manufacturers. However, microgaps between the lateral surface of external hex of the fixture and the abutment could be dectected in all samples. Conclusion : Considerable variations in machining accuracy and consistency were noted in the samples and the implant-abutment-screw interfaces were incomplete. From the results of this study, further development of the system will be required, including improvements in pattern design.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.3
• /
• pp.89-101
• /
• 2016

This study examined spatial disposition of wildlife highway mortality using road-kill GIS database and Naver panoramic 360 degree views to find out which habitat and road variables most influenced road-kill numbers for each mammal species and how the landscape and road elements are connected on highway. Road-kills on Yeongdong(YD) and Jungbu highway(JB) generally tended to be higher in natural barren, grassland and cropland due to its value of preferred habitats of nocturnal and multihabitat species like water deer(Hydropotes inermis argyropus), raccoon(Nyctereutes procyonoides) and hare(Lepus coreanus). Land cover in YD showed no difference between species (p=0.165) while JB did by species (p=0.001). This may be explained by disparate landscape between mountain and urban or the fact that YD in long term operation might have enabled consistent crossing pattern compared to JB experiencing continuous extension works which may in turn have deviated the road crossing. Although road-kill prevention effect of local topography alone was appreciable, compared to less significant or ineffective fence and guardrail, gentle slope declining in a direction to the road turned out to offset the preventive effect of juxtaposed fence. Furthermore, green patches on road near intersection were deemed a visual stepping stone facilitating wildlife attempted crossing and local roads juxtaposed with a highway were especially left defenceless to road-kill without road barriers.

• Journal of Periodontal and Implant Science
• /
• v.30 no.3
• /
• pp.491-504
• /
• 2000

In clinical therapy, the current goal of dental implants is to enhance quantity and quality of osseointegration. Surface roughness and oxide structure are considered to influence the behavior of adherent cells. The purpose of this study is to evaluate the effect of different surface treatment on cellular response. The attachment and proliferation of osteoblast-like cell on sandblasted, sandblasted and etched, thermal oxidated surfaces have been compared. Sandblasting was done with $Al_2O_3$ particles(grain size of $50{\mu}m$), etching was processed with $NH_4OH$ : $H_2O_2$ : $H_2O(1:1:5)$ at $90^{\circ}C$ for 1 minute. Thermal oxidation was followed sandblasting and etching at $400^{\circ}C$, $600^{\circ}C$, $800^{\circ}C$ for 2 hours. Measurement of surface roughness after the different treatment did not show any differences of Ra value between terated surfaces. Cell attachment and proliferation were increased during experiment period, but no difference was observed. SEM evaluation revealed a similar pattern of osteoblast-like cells, well attached with dendritic extension and producing numerous matrix vesicles on cell surface. The results of this study showed that oxide layer alteration by thermal oxidation did not affect the attachment and proliferation of osteoblast-like cells. This suggests the possibility that the cellular responses are further influenced by surface roughness than titaniun oxide structure.