• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.930-937
• /
• 2004

In tunnel blasting, rock damage and overbreak at excavation limits are strongly related to stability of the tunnel and cost for rock support, and also affect to maintenance after tunnel construction. In this study, many field tests and measurements have been carried out in highway tunnels so that discordance between blast design and practical production blasting could be settled and actual methods of over break control could be proposed through the understanding of the problems in existing blasting patterns. Test blasting in tunnel was carried out many times in two tunnel sites. Also, long hole blasting longer than existing blasting pattern was executed for good grade of rock mass whose RMR value is more than 60. Using the results of test blasting, new standard blasting patterns for two lane tunnel were proposed. As a result of profile measurement after blasting, drilling is a major factor of overbreak. And then the methods for minimizing overbreak were adapted in new blasting patterns.

• Computers and Concrete
• /
• v.21 no.4
• /
• pp.451-461
• /
• 2018

Present study is mainly concerned about the idea of innovative utilization of bamboo in modern construction. Owing to its compatible mechanical properties, a beneficial effect of its use in reinforced concrete (RC) frame infills has been observed. In this investigation, finite element analyses have been performed to examine the failure pattern and stress distribution pattern through the infills of a moment resisting RC frame. To validate the pragmatic use of bamboo reinforced components as infills, earthquake loading corresponding to Nepal earthquake had been considered. The analysis have revealed that introduction of bamboo in RC frames imparts more flexibility to the structure and hence may causes a ductile failure during high magnitude earthquakes like in Nepal. A more uniform stress distribution throughout the bamboo reinforced wall panels validates the practical feasibility of using bamboo reinforced concrete wall panels as a replacement of conventional brick masonry wall panels. A more detailed analysis of the results have shown the fact that stress concentration was more on the frame components in case of frame with brick masonry, contrary to the frame with bamboo reinforced concrete wall panels, in which, major stress dispersion was through wall panels leaving frame components subjected to smaller stresses. Thus an effective contribution of bamboo in dissipation of stresses generated during devastating seismic activity have been shown by these results which can be used to concrete the feasibility of using bamboo in modern construction.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.247-248
• /
• 2021

Recently, the government is pursuing to reduce the serious accidents in most industries, including the construction industry, by enacting laws on punishment. The accident rate tends to be depended on the size and type of construction sites, and the accidents occur frequently due to inadequate implementation of safety management system and management standards, especially, in small and medium-sized sites. This study has performed the profiling of 265,000 accident cases on construction sites by attribute analysis such as the ratio of days lost to work, and pattern of days lost to work compared to the size of the construction. It turned out that the proportion of accident cases was high mainly in small-scale construction sites, and long-term labor losses occurred. Shortly, it is necessary to establish an institutional standard for applying a realistic safety management cost calculation and management system centered on small-scale sites. Therefore, this study is expected to be used as fundamental data or guideline for developing a customized safety management and accident prevention system for a worker reflecting the conditions of a construction site in the future.

• The KIPS Transactions:PartD
• /
• v.8D no.1
• /
• pp.88-98
• /
• 2001

in this paper, we imlemented design pattern retrieval system for efficient managemant and reusability of design patterns. Pattern is conssisted of property information and meta information id used for similarity measurement on classification and retrieval of patterns.Meta information od used for UML modeling of patterns. We classified design patterns with the empirical scope in addition to Gamma's basic classification. also we used E-SARM for retrieval represented UML diagram with pattern meta information, and simulated the environment so as to obtain best result on applying to retrieval of design pattern. This system is able ro resister new patterns through pattern viewer and manages these patterns with property informaiton and meta information. Thus this system supports efficient management of patterns, UML modeling, priority pattern retrieval, higher reusability and reduces pattern selection cost.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.291-298
• /
• 2004

Effective 3 dimensional modelling is to be essential work for design of construction, mechanic and industrial part. Especially, it makes possible for reverse design. It need rapidity, accuracy, reality. Data acquisition method for modelling are contact 3dimensional measurement system, LASER scanner, Pattern scanner, and digital photogrammetry. This study introduce to 3 dimensional modelling methods and analysis of these method. We tried to 3D modelling of automobile part using OPTO-Top pattern scanner which system have rapidity and accuracy, and compared effectiveness of each method. The 3D display web environment was made.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.783-788
• /
• 2001

Voids created with concrete construction or deterioration result in serious weakness from the aspects of both structural and durable function. Ultrasonic method using image processing technique was used for detecting pattern of voids in concrete in this study Experimental investigation was carried out for three types(patterns) of void in concrete. The effect of curing period of concrete and ultrasonic measurement method was also investigated. As a result it has been verified that the semi-direct measurement method is more effective than the other methods for detecting pattern of voids in concrete in ultrasonic method using image processing technique. The longer the curing period of concrete is, the better the detection accuracy of void pattern can be obtained.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.2
• /
• pp.159-170
• /
• 2006

This study aims to examine the expressive properties of contemporary corset, and to develop designs and produce patterns for corset look clothes. Through these courses, it develops a pattern that may all meet the exactness, functionality and aesthetic aspects of a pattern and provides materials that may help create a corset look design in the course of actuallymaking a garment. Based on the elements mentioned above, a total of three (3) real works were developed and their patterns were created. The patterns include two (2) flat patterns and one (1) patterns using the draping method. The results found in the course of creating works and patterns are as follows: With new corset look designs, this study was able to artificially highlight the body and express the beauty of costume through revelation of the body In addition, it explored the possibility that the phenomenon that underwear becoming outerwear may be a new idea in dress designing.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.585-590
• /
• 2000

Recently, It is gradually raised necessity that thickness of thin film is measured accuracy and managed in industrial circles and medical world. Ultrasonic Signal processing method is likely to become a very powerful method for NDE method of detection of microdefects and thickness measurement of thin film below the limit of Ultrasonic distance resolution in the opaque materials, provides useful information that cannot be obtained by a conventional measuring system. In the present research, considering a thin film below the limit of ultrasonic distance resolution sandwiched between three substances as acoustical analysis model, demonstrated the usefulness of ultrasonic Signal processing technique using information of ultrasonic frequency for NDE of measurements of thin film thickness, sound velocity, and step height, regardless of interference phenomenon. Numeral information was deduced and quantified effective information from the image. Also, pattern recognition of a defected input image was performed by neural network algorithm. Input pattern of various numeral was composed combinationally, and then, it was studied by neural network. Furthermore, possibility of pattern recognition was confirmed on artifical defected input data formed by simulation. Finally, application on unknown input pattern was also examined.

• Journal of the Korean Home Economics Association
• /
• v.19 no.2
• /
• pp.107-121
• /
• 1981

The objective of this study is to establish a standard size for clothing construction and to develop a basic bodice pattern for Misses. 1. Seven kinds of pattern generally used in Korea were collected and compared in the aspect of items of necessary measurements and application of measurements to pattern drawing. 2. 209 girls aged 17 to 25 were measured on 22 items. The measurements were analyzed by calculation of means, standard deviations, co-variance, range, maximum, minimum, and correlation co-efficient between each item. the data were classified into four size groups according to bust size. Correlation co-efficient between each item were as follows: 1) Correlation co-efficients of bust to upper bust and waist were very high. 2) Correlation co-efficients of bust to shoulder width, across back and across chest were relatively high (r=.6385, r=.7493, r=.6344, respectively). 3) Bust had little correlation to neck and shoulder slope.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.383-385
• /
• 2001

This paper presents electric power use pattern by end-use for each industry in Korea. Until now, the survey for industrial electric power use pattern by end-use has been sporadic and unsystematic. This paper presents the systematic survey and analysis for electric power use pattern by end-use. The major survey items include rate power and the number of equipments, and operation rate, etc. This paper will make good use of data base construction and policy for DSM.