• Journal of the Korea Institute of Building Construction
• /
• v.8 no.3
• /
• pp.69-74
• /
• 2008

TProduction's adaptation manufactured construction component is enlarged the result of development in the various construction products and technology. But the pre-fabricated unit bathrooms are not used in spite of many advantages which occupies less than 10% of its market share. This study is for the alternative methods through the on-the-spot experiments to lessen resonance of the wall panel in the Unit bathroom. The results are summarized as follows. Unit bathroom was effective in suitableness part noise control performance when attach sound-absorbing materials. But noises control performance was not better than the general used bathroom. When Urethane (egg container pattern) was applied in the unit bathroom, unit bathroom can be expected for utilization in the construction market field.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.1
• /
• pp.21-34
• /
• 2023

This study identified the materials and construction methods of 'Old Wall' in 13 villages which were designated as National Registered Cultural Heritage at the time of designation and examined the their structural changes based on field survey. The results are as follows: First, the 'Old Wall' consisted of 10 Soil-Stone Wall and 5 Stone Wall. At the time of designation, Stone Wall, which was built irregularly by dry-construction of natural stones, is similar in shape, but Soil-Stone Wall showed difference by the construction method of making used stones, joints, and faces. Second, the study extracted the changes of 'Old Wall' by repair and examined the changes of construction methods as well as the substitution and addition of materials of structure. The wall-roof was built with cement roof-tile and asbestos slate which have the advantage improve durability and cost-effectiveness. In addition, tile-mouth soil was added to korean traditional roof-tile to prevent rainwater from flowing in. Besides, to improve constructional convenience, the natural stone of the wall-body was replaced with blast stone, float stone and cut stone. Cement block, cement brick and cement mortar were frequently used to repair as well. As Soil-Stone Wall was transformed from irregular pattern-construction to comb pattern-construction and wet-construction was changed to dry-construction, it caused landscape and structural problems. Also, the layer of cement mortar applied to wall-foundation blocked the flow of rainwater that was induced by dry-construction of natural stones. Third, the study regarded that the problem with the repair of 'Old Wall' may occur as it is located in living space, because the owner of the wall could repair for the minor damages without technical knowledge. In addition, it is difficult for repair companies in charge of maintenance of Cultural Heritage to supply local materials, and it is differential construction specifications are not applied.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.185-188
• /
• 2002

This paper proposes a efficient way to use Database that is constructed about attack-pattern. For IDS that activate confrontation, we reconstruct by Layered Attack Tree after constructing attack pattern by Attack Tree. And then this paper has designed IDS that Layered Attack Tree is applied, verified them.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.382-388
• /
• 2011

Being aware of the risk in advance necessitates intricate processes but is feasible. Although previous studies have demonstrated high accuracy, their performance still leaves room for improvement. A self-organizing feature map (SOM) based neurofuzzy model is developed in this study to provide another alternative for forecasting corporate financial distress. The model is designed to yield high prediction accuracy, as well as reference rules for evaluating corporate financial status. As a database, the study collects all financial reports from listed construction companies during the latest decade, resulting in over 1000 effective samples. The proportion of "failed" and "non-failed" companies is approximately 1:2. Each financial report is comprised of 25 ratios which are set as the input variable s. The proposed model integrates the concepts of pattern classification, fuzzy modeling and SOM-based optimization to predict corporate financial distress. The results exhibit a high accuracy rate at 85.1%. This model outperforms previous tools. A total of 97 rules are extracted from the proposed model which can be also used as reference for construction practitioners. Users may easily identify their corporate financial status by using these rules.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.3
• /
• pp.73-84
• /
• 2022

This study aims to present the direction of research for rational clothing design and production and improve the productivity of the fashion industry by analyzing the most recent 11 years (from 2010 to 2021) with regard to the clothing construction field. Analyzing the research trends in the field of clothing construction, which is deeply related to clothing production, will suggest the direction of research for clothing design and production. To analyze the current status of research in the field of clothing construction, research trends were analyzed, focusing on 525 research journal articles from six Korean clothing-related journals with terms related to torso and upper and lower limbs. The analysis results of this study are as follows. First, the rapid development of IT technology requires changes and innovations in all processes of clothing construction, including body shape analysis and pattern design. Therefore, it is believed that both body shape and pattern research should be continuously conducted to produce clothes with an excellent silhouette and fit depending on the body shape through studies, such as developing 3D patterns and converting 3D body figures into 2D patterns, among others. Second, since body shape studies are concentrated on young, middle-aged, and the elderly, it is believed that various body shape studies should be conducted on infants and elementary, middle, and high school students who have significant changes in body shape due to changes in the living environment. Third, if the content of pattern research is expanded to various items and is widely conducted, it will contribute to the production of clothing that has an excellent fit. Fourth, at a time when aging in society is accelerating, it is believed that research on patterns and clothing systems that can increase the fit of clothing by analyzing the body types of elderly male and female consumers should be actively conducted. Because the analysis was conducted only among six Korean academic journals, there is a limitation in the expanded interpretation of the results derived from this study.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1824-1835
• /
• 2010

This study develops tight-fitting torso patterns for performance garments by taking into account the skin deformation generated directly from a 3D scan during arm movements. The skin deformation caused during the arm movements was scanned after scanning the skin surface stamped with a circle. To create a torso pattern in response to skin deformation, the ratio and direction of the skin deformation were first measured and analyzed so that the 3D human body could be segmented. After translating, the 3D skin surface was segmented into 2D flat patterns, designing nude patterns and reducing them as well as tight-fitting shirts: the skin deformation segment shirts were made in response to the skin deformation. The features of the fabric deformation and the garment pressure were analyzed and evaluated. In comparison with a clothing construction segment shirt, the diameter of the skin deformation segment shirt was smaller as well the ratios of extension and reduction was less. The garment pressure of the skin deformation segment shirt was higher. The skin deformation segment shirt fitted more tightly compared to a clothing construction segment shirt as it covered the body more thoroughly and was as comfortable as the other shirts with less fabric deformation made as the body moved.

• Korean Journal of Ecology and Environment
• /
• v.37 no.4 s.109
• /
• pp.400-405
• /
• 2004

Since a large bank-protection works project was undertaken during winter in the middle reaches of the Chikuma, the riverbed structure was drastically altered. In order to assess the short-term impact of bank-protection works on the abundance Pattern of Stenopsyche marmorata (Trichoptera) from spring to early summer, we conducted an investigation on the capture of adults using light traps before and after construction work. The patterns of the daily capture of S. marmorata and the Namely, after construction, the daily catch of adult numbers increased only slightly during the investigation periods. This suggested that the age structure of the S. marmorata larval population had changed in the construction area. Our data suggest that bank-protection projects impact the abundance pattern of adult caddisflies in the river ecosystem.

• Korean Journal of Human Ecology
• /
• v.24 no.2
• /
• pp.255-266
• /
• 2015

In this study, we have developed the ergonomic pattern from the 3D human body reflecting cycling posture and extensibility of the stretch fabrics. Adjusting pressure level in the construction of athlete's tight-fitting stretch garments by reducing the original pattern is a challenging subject, which influence on the performance of the wearer directly. Therefore, in this study, relationships between the reduction rates of the 2D pattern obtained from the 3D human scan and resultant clothing pressure were explored to improve the fit and pressure exerted by reduced clothing pattern. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on two consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Comparing 2/3T-pattern with T-pattern, the latter was superior to 2/3T-pattern in terms of adhere well to the waist and hip area in the 0.032 significance level. T-pattern was superior to 2/3T-pattern in terms of fitting and wear comfort. As results, the pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the skin while cycling posture, so that the extra ease for movement and good fit was not need to be considered. The optimized reduction rates were determined with the proposed reduction rate, the resultant pressure range was within the range of $0.5{\sim}3.0gf/cm^2$ at eight locations on the body except front waist band and thigh band.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.7 s.155
• /
• pp.1090-1102
• /
• 2006

The purpose of this study is to develop an improved work clothing which is much safe, comfortable, mobility and convenient than what workers currently wear at construction site. The investigation has been conducted to evaluate current work clothing to grasp any problems, discomforts and damages related to the work clothing. For the best and accurate data, hands-on investigation and a short-interview have been performed at the construction site as well as formulating a questionnaire. The questionnaires was answered by 425 workers and safety manager of 13 different construction site. The result of the questionnaire enables us to design a sample work clothing, many pa π s such as material, pattern and design have been improved. To improve the amenity of heat, the surface of a material was used by $Aerocool^{\circledR}$ fiber which contains inside dryness function. In order to absorb perspiration on the back the armpits, mesh martial that is mixture of $Coolever^{TM}$ fiber and $Mirawave^{TM}$ fiber was used to absorb perspiration in an effective manner. And a sleeve's bottom part and trousers' bottom part's cover method have been changed. Sample work clothing was shorten at the side of upper garment up to 2cm and lengthen the length of the back by 3cm. To reduce the tightness around armpit more room was given in that area. Darts were added to the elbow, the hip, and the knees that also followed an ergonomic pattern. A sample work clothing evaluated an objective assessment and subjective assessment to compare to a current work clothing. Assessment group consists of seven subject groups and nine expert groups to evaluate external appearance and adaptability to the movements. In all aspects of the test, the result of evaluation process of the sample work clothing received more positive assessment than the current work clothing.

• Journal of the Korean Society of Costume
• /
• v.59 no.1
• /
• pp.159-167
• /
• 2009

Based on instructions in the textbook "How to Construct Korean Costumes" which I authored, my university students were required to make Pungcha-Baji(Korean traditional pants for children) for one-year-old boys. While examining the students' construction, I found that the side seams of the vest and pants did not line up but were improperly twisted. It was found that the pants did not cover the child's backside because the width of the back was smaller than the width of the front when one of the side panels and the large center panel in the front was half the size of the hip and one of the side panels and the small panel in the back was four fifths of half the size of the hip. Although there were differences between the waist size of the pants and the bottom hem of the vest, the textbooks instruct that the amount of material and the number of pleats(i.e. 4 pleats) on the pants and the vest should be the same. Finding this mistake led me to investigate Pungcha-Baji construction in related textbooks. Thus with the textbook instruction, the side seams of the pants and the vest do not match and are improperly twisted. Hence, as a solution, the pleats should be made and adjusted after matching the side seams of the pants and the vest. The purpose of this study is to examine currently available Pungcha-Baji related textbooks and determine the correctness of their instructions and to ultimately provide correct construction methods for Pungcha-Baji pattern for academic purposes.