• ETRI Journal
• /
• v.36 no.3
• /
• pp.367-373
• /
• 2014

With high bandwidth, low interference, and low power consumption, optical network-on-chip (ONoC) has emerged as a highly efficient interconnection for the future generation of multicore system on chips. In this paper, we propose a new path-setup method for ONoC to mitigate contentions, such as packets, by recycling the setup packet halfway to the destination. A new, strictly non-blocking $6{\times}6$ optical router is designed to support the new method. The simulation results show the new path-setup method increases the throughput by 52.03%, 41.94%, and 36.47% under uniform, hotspot-I, and hotspot-II traffic patterns, respectively. The end-to-end delay performance is also improved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1068-1077
• /
• 2014

In this paper, we propose a novel method for path setup that optimizes energy consumptions for wireless sensor network. Existing studies usually generate paths according to Random way point approach so that it requires unnecessary energy consumptions for estimating location of the mobile sink node and transmission paths of packets. To address this problem, we propose a method that creates paths for mobile sink node using the Hilbert curve. Moreover, our method adjusts the path of the mobile sink node according to the density of sensor nodes to minimize data transmission delay. In our experiments, the proposed method outperforms existing work such as TTDD and CBPER by up to 50 times in terms of energy efficiency.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.4
• /
• pp.74-84
• /
• 2001

In the current Internet, InteServ model based on Resource reSerVation Protocol (RSVP), DiffServ Model based on service differentiation according to per hope behavior(PHB) and traffic engineering policy, and two-tire model of above mentioned two models which are adapted differently as the target network status for providing the end-to-end QoS Path are suggested. But, when we integrated this internet QoS into the ATM based network, differences of the connection setup procedure, name/address translation methods, and QoS provisioning mechanisms for end-to-end path setup procedures are introduced. In this paper, we propose the method of shortcut based QoS path setup procedure to solve these problems, and to guarantee the integration and scalability of Next Generation Internet(NGI) names/address in Integrated IP network into ATM based network. This network should support the engineering differentiated into the multiple service classes, which depend on established by this path is designed suitably into the target router and host step by step. In the near future, this function which provide the QoS guaranteed path based on end-to-end shortcut between the configuration devices are extended into the NGI target network.

• The KIPS Transactions:PartA
• /
• v.14A no.2
• /
• pp.85-90
• /
• 2007

This paper presents a facial animation and expression control method that enables the animator to select any facial frames from the facial expression space, whose expression transfer paths the system can setup automatically. Our system creates the facial expression space from approximately 2500 captured facial frames. To create the facial expression space, we get distance between pairs of feature points on the face and visualize the space of expressions in 2D space by using the Multidimensional scaling(MDS). To setup most suitable expression transfer paths, we classify the facial expression space into four field on the basis of any facial expression state. And the system determine the state of expression in the shortest distance from every field, then the system transfer from the state of any expression to the nearest state of expression among thats. To complete setup, our system continue transfer by find second, third, or fourth near state of expression until finish. If the animator selects any key frames from facial expression space, our system setup expression transfer paths automatically. We let animators use the system to create example animations or to control facial expression, and evaluate the system based on the results.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.2
• /
• pp.217-237
• /
• 1995

One of the most distinguished advantages of five-axis machining is that complex free surfaces(such as impeller) can be machined by one setup. Five-axis CNC machine, however, is very expensive so that its usage is restricted to a few large companies. As an economical approach to five-axis machining, this paper presents a method for machining the five-axis free surfaces(using ball-end mill) on a three-axis CNC machine with an index table. The method developed consists of: a) determining the minimum number of part setups and their interference-free and collision-free potential machining area, b) calculating actual machining area for each setup, and c) generating 3-axis cutter path for each part setup. The method has been successfully tested via computer simulations for several complex surfaces including impeller.

• Journal of Korea Multimedia Society
• /
• v.21 no.11
• /
• pp.1327-1332
• /
• 2018

An AGV(Automated Guided Vehicle) where is running on production automated system is related efficiency of production system similarly. On previous study proposed a path collision avoidance algorithms using shortest path of AGV. Running time about loading and unloading with shortest path of AGV is important factor to decide the production system efficiency. In this paper, we propose a method of shortest path and shortest time. Also propose the decision making method of collision avoidance position for setup a shortest runway for next command. To do verify the proposed method consist a simulation for AGV. Finally, we compare and analyse the proposed system between the existing system and show that our system can effectively the performance.

• Journal of Digital Contents Society
• /
• v.3 no.2
• /
• pp.143-152
• /
• 2002

In this paper, we present the general interface, label-switched path structure and link bundling in GMPLS to improve the scalability. The LMP protocol is also introduced to efficiently manage the internal link, and the signaling protocol, hierarchical path setup, hi-directional LSP setup and suggested label method are presented. Finally, the techniques of protection and restoration are presented. In specific, various applicable restoration techniques in GMPLS are discussed.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.539-546
• /
• 2004

An improved low coherence interferometer system and a new analysis method for the accurate measurement of the optical path difference error of an AWG (Arrayed-Waveguide Grating) are described. The use of software simplifies the experimental setup by eliminating the hardware (clock generator). In addition, the actual distances between the peak positions of the adjacent interference signals are calculated using interpolation methods. The wavelength transmission characteristics of the AWG are calculated assuming the measured phase errors. The calculated AWG characteristic is quite similar to the actual measurement result, confirming accuracy of the proposed measurement setup.

• International Journal of Contents
• /
• v.1 no.1
• /
• pp.29-34
• /
• 2005

In this paper, we proposed an advanced authentication structure for reducing the certificate acquisition time which is one of the factors that should be improved in a conventional wireless PKI. A conventional key exchange method simply performs the key exchange setup step based on discrete algebraic subjects. But the mutual-authentication procedure of wireless PKI for reducing authentication time uses an elliptical curve for a key exchange setup step. We simulated and compared the authentication structure proposed by Sufatrio, K. Lam[4] and proposed authentication structure in terms of the authentication time. Simulation results show that the proposed method reduces the authentication time compared to the conventional wireless PKI authentication method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.105-109
• /
• 2013

There are the free space model, the direct-path and ground reflected model, Egli model, Okumura-Hata model in the representative propagational models. The measured results at the area of PNG area were used as the experimental data in this paper. The new proposed partial interval analysis method is applied on the measured propagation data in the cellular band. The interval for the analysis is divided from the entire 30 Km distance to 5 Km, and next to 1 Km. The best-fit propagation models are chosen on all partial intervals. The means and standard deviations are calculated for the differences between the measured data and all partial interval models. By using the 5 Km- or 1 Km- partial interval analysis, the standard deviation between the measured data and the partial propagation models was improved more than 1.7 dB.