• Journal of Mechanical Science and Technology
• /
• v.16 no.2
• /
• pp.137-146
• /
• 2002

In this paper, a path generation algorithm that uses sensor scannings is described. A scanning algorithm for recognizing the ambient environment of the Automatic Guided Vehicle (AGV) that uses the information from the sensor platform is proposed. An algorithm for computing the real path and obstacle length is developed by using a scanning method that controls rotating of the sensors on the platform. The AGV can recognize the given path by adopting this algorithm. As the AGV with two-wheel drive constitute a nonholonomic system, a linearized kinematic model is applied to the AGV motor control. An optimal controller is designed for tracking the reference path which is generated by recognizing the path pattern. Based on experimental results, the proposed algorithm that uses scanning with a sensor platform employing only a small number of sensors and a low cost controller for the AGV is shown to be adequate for path generation.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.10
• /
• pp.58-66
• /
• 2008

In the development of intelligent vehicles, path tracking of unmanned vehicle is a basis of autonomous driving and automatic navigation. It is very important to find the exact position of a vehicle for the path tracking, and it is possible to get the position information from GPS. However the information of GPS is not the current position but the past position because a vehicle is moving and GPS has a time delay. In this paper, therefore, the moving distance of a vehicle is estimated using a direction sensor and a velocity sensor to compensate the position error of GPS. In the steering control, optimal fuzzy rules for the path tracking can be found through the simulation of Simulink. Real driving experiments show the fuzzy rules are good for the steering control and the position error of GPS is well compensated by the proposed estimation method.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.11
• /
• pp.1265-1271
• /
• 2011

These days the number of aged and disabled people is increasing rapidly. But most of the disabled or the aged who have the ability to work, want to engage in economic activities and solve social restrictions as well as their bad financial conditions. This paper concerns about the tracking control of an electric wheelchair robot for welfare vehicle where the seat and electric wheelchair are separated and electric wheelchair robot must be autonomously controlled without the help of assistant. So the aged or the disabled people can drive welfare vehicle by himself by adopting this system. Therefore the concept of both an autonomous driving of electric wheelchair and path tracking robots is required in this system. Finally we suggested fuzzy controller in order to control the path tracking of electric wheelchair robot and compared the capability of the proposed controller with conventional PID controller.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.90-101
• /
• 1999

This paper is concerned with the design of automatic ship maneuvering system including automatic path tracking controller and automatic berthing controller. The optimal control technique is employed to design the automatic path tracking controller, which is based on the linearized equations of ship motion. The numerical example shows that the automatic path tracking controller is capable of tracking the line between way points which are determined by pilot a priori. The decentralized control technique is employed to design the automatic berthing controller. In addition to the automatic path tracking controller, the fuzzy logic controller is used to control the forward speed. The numerical example shows that the automatic berthing controller can be successfully implemented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2050-2056
• /
• 2008

A realization for moving object sensing and tracking system in two dimensional plane using stereo line CCDs and lighting source is presented in this paper. The system is realized that instead of processing camera images directly, two line CCD sensor and input line image is used to measure two dimensional distance by comparing the brightness on line CCDs. The algorithms are used the moving object sensing, path tracking and coordinate converting method. To ensure the effective detection of moving path, a detection algorithm to evaluate the reliability of each measured distance is developed. The realized system results are that the performance of moving object recognizing shows 5mm resolution, and enables to track a moving path of object per looms period.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.315-318
• /
• 2005

This paper characterizes the performance for a remote path tracking control of the mobile robot in IP network viamiddleware. The middleware is used to alleviate the effect of the delay time on a mobile robot path tracking in Network-Based Control environment. The middleware also can be implemented in a modular structure. Thus, a controller upgrade or modification for other types of network protocols or different control objectives can be achieved easily. A case study on a mobile robot path-tracking with IP network delays is described. The effectiveness of the proposed approach is verified by experimental results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.157-160
• /
• 2008

A realization for moving object detecting and tracking system in two dimensional plane using stereo line CCDs and lighting source is presented in this paper. Instead of processing camera images directly, two line CCD sensor and input line image is used to measure two dimensional distance by comparing the brightness on line CCDs. The algorithms are used the moving object tracking and coordinate converting method. To ensure the effective detection of moving path, a detection algorithm to evaluate the reliability of each measured distance is developed. The realized system results are that the performance of moving object recognizing shows 5mm resolution and mean error is 1.89%, and enables to track a moving path of object per 100ms period.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2473-2475
• /
• 2001

In trajectory tracking methods, the error values of current position and velocity are compensated to follow the given reference path and velocity. The path tracking for a wheeled mobile robot is treated in this paper. It is very difficult to implement stable trajectory tracking algorithms because mobile robots have kinematically non-holonomic constraints. For solving this problem, a velocity controller is presented in this paper. This velocity controller is designed by a PID controller which could be easily employed. In this case, velocity errors caused by system uncertainties or internal and external disturbances could exist. A neural network is used for compensating the velocity errors. Input variables of this neural network compensator are defined by differences between the velocities of the posture controller and the real velocities of the mobile robot. Simulation results show the effectiveness of the proposed controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.109.1-109
• /
• 2001

This paper deals with the path following problem of car-like intelligent mobile robot. A robust sliding mode control law based on time-varying state feedback is performed via Lyapunov method for path tracking of nonholonomic mobile robot with uncertainties. At first, A sliding control law is designed by combing the natural algebraic structure of the chained form system with ideas from sliding mode theory. Then, a robust control law is proposed to impose robustness against bounded uncertainties in path tracking. The problem of estimating the asymptotic stability region and the sliding domain of uncertain sliding mode system with bounded control input is also discussed. The proposed sliding mode control law can ensure the global reaching condition of the uncertain control system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.169-170
• /
• 2008