• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.925-933
• /
• 2003

Network is expected to be developed into optical Internet network collected IP layer and optical layer, but GMPLS is risen at the transitional evolution stage because of the present technology level. GMPLS that MPLS is extended and generalized is able to support not only the packet switching device but also the devices which perform switching in time, wavelength, and space domain. To implement the common control plane to these various switching types, GMPLS extends the existing MPLS signaling and routing protocol. In this paper, we describe the overview of GMPLS technology, and then we will refer to the OSPF(Open Shortest Path First), which was used to exchange the status information of link, as the plan of routing extension to exchange the information of various link type, bandwidth, link protection type etc. And also, we describe the definition of new protocol, so called, LMP that is a signaling protocol for solving complex problem which manages hundreds and thousands of links between two nodes. And we will examine and analyze the plan of signaling protocol extension to apply signaling protocol RSVP-TE(Resource Reservation Protocol) for traffic engineering in MPLS to network, and the message objects and formats associated with modified RSVP.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4738-4753
• /
• 2018

Efficient rendezvous node selection and routing algorithm (RNSRA) for wireless sensor networks with mobile sink that visits rendezvous node to gather data from sensor nodes is proposed. In order to plan an optimal moving tour for mobile sink and avoid energy hole problem, we develop the RNSRA to find optimal rendezvous nodes (RN) for the mobile sink to visit. The RNSRA can select the set of RNs to act as store points for the mobile sink, and search for the optimal multi-hop path between source nodes and rendezvous node, so that the rendezvous node could gather information from sensor nodes periodically. Fitness function with several factors is calculated to find suitable RNs from sensor nodes, and the artificial bee colony optimization algorithm (ABC) is used to optimize the selection of optimal multi-hop path, in order to forward data to the nearest RN. Therefore the energy consumption of sensor nodes is minimized and balanced. Our method is validated by extensive simulations and illustrates the novel capability for maintaining the network robustness against sink moving problem, the results show that the RNSRA could reduce energy consumption by 6% and increase network lifetime by 5% as comparing with several existing algorithms.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.201-208
• /
• 2005

Recently, the container terminal requires the study of method to increase efficiency through change of its operation method. Loading plan is a very important part to increase the efficiency of container terminal. Loading Plan is largely divided into two cases, deciding loading location and loading scheduling and this Paper proposes a more efficient method of container loading scheduling. Container loading scheduling is a problem of combination optimization to consider several items of loading location and operation equipments. etc. An existing method of cluster composition that decides the order of container loading scheduling has a restriction to increase the efficiency of work owing to rehandling problem. Therefore, we Propose a more efficient method of container loading scheduling which composes containers with identical attribution, based on ship loading list and yard map, into stack units of cluster, applying to hierarchical clustering method, and defines the restriction of working order. In this process, we can see a possible working path among clusters by defining the restriction of working order and search efficiency will be increased because of restricted search for working path.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.343-346
• /
• 2007

Recent advances in automation and robotic technologies in the manufacturing industry suggest that the greater level of automation may be extremely beneficial for the construction industry. However, only some of the high-technology advances may be applied to the construction industry due to the fast-changing construction environment in which work locations are constantly changing and material, equipment, and workers are always moving. The earthwork operation for site development is a good candidate for applying automation technology, because it is a very repetitive and tedious task and needs lots of construction equipment. This paper presents the model of a construction environment and a moving plan for an automated earthwork system, which can produce an effective moving path of an excavator platform with an Octree model. To generate the moving path, the know-how of skilled operators and construction managers is added in the proposed model.

• Journal of Korean Society of Disaster and Security
• /
• v.11 no.2
• /
• pp.83-89
• /
• 2018

The significant sedimentation at the estuary in the eastern coast of Korea frequently causes river mouth occlusion where disconnection between the river and sea is observed. River mouth occlusion causing watershed retention raises the environmental risk of the area as it impairs water quality and threatens the area's safety in the event of floods. This study proposes a plan to maintain stability of river channel and flow of flood discharge at the estuary with loss of its function for disaster prevention. To this end, the study tries to change the location and width of stream path, focusing on the center line of stream near the sand bar of river mouth. This allows to identify a shape of stream path that leads the most stable flow. To review the result, this study uses the SRH-2D, a model for two-dimensional hydraulic analysis, and conduct numeric simulation. The simulation result showed that the most effective plan for maintaining the stable flow of running water without having the area sensitive to changes in hydraulic characteristics is to lower the overall river bed height of the sand bar near the center line of stream to a equal level.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.38-45
• /
• 2012

Finding shortest paths on time dependent networks is an important task for scheduling and routing plan and real-time navigation system in ITS. In this research, one-to-one time dependent shortest path algorithms based on link flow speeds on urban networks are proposed. For this work, first we select three general shortest path algorithms such as Graph growth algorithm with two queues, Dijkstra's algorithm with approximate buckets and Dijkstra's algorithm with double buckets. These algorithms were developed to compute shortest distance paths from one node to all nodes in a network and have proven to be fast and efficient algorithms in real networks. These algorithms are extended to compute a time dependent shortest path from an origin node to a destination node in real urban networks. Three extended algorithms are implemented on a data set from real urban networks to test and evaluate three algorithms. A data set consists of 4 urban street networks for Anaheim, CA, Baltimore, MD, Chicago, IL, and Philadelphia, PA. Based on the computational results, among the three algorithms for TDSP, the extended Dijkstra's algorithm with double buckets is recommended to solve one-to-one time dependent shortest path for urban street networks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.401-409
• /
• 2018

This paper presents means of reducing noise in NSD using path control methods for Light Tactical Vehicles (LTV). NSD is applied to the rear axle of LTVs for enhancing mobility. NSD can improve mobility of vehicles with a high locking ratio but causes noise under certain conditions due to its mechanical structure. This noise results from contact between gears due to the differential role of NSD. The noise affects users, so users have continually requested noise reductions. Though the noise doesn't affect product performance and durability, and satisfies the National Defense's noise condition standards, users request for noise reduction is the focus of this research. Eliminating the source of sound for LTVs is realistically limited, so this research applies a path control method to reduce noise by controlling the path which transmits the noise. This study improves the structural delivery system and examines methods of reducing noise in LTV systems.

• 한국노년학
• /
• v.37 no.3
• /
• pp.567-582
• /
• 2017

The purpose of this study is to investigate the path model consisted of action planning, physical activity, and depression in order to obtain an enhanced understanding of their relationship and to support the aged with depression in community. In order to achieve this, precedent study was reviewed and the program with physical activity and action planning was executed. the data of a investigation of action planning, physical activity, and depression of the aged participated in the program which was consisted of physical activity with Action Planning was used and 116 cases were analyzed. The data analysis was done by descriptive statistics, correlation analysis, and path analysis. The results were as follows. First, the path model was accepted. Second, the direct path of action planning to physical activity was significant. Third, the direct path of both action planning and physical activity to depression were significant. Fourth, the effect size of action planning to depression was more than that of physical activity. Fifth, the indirect path of action planning to depression through physical activity was significant. On the basis of these results, this suggests a need to add action planning on national physical activity plan, establish the delivery system for physical activity program with action planning in mental health center in community, and applicate narrative approach skills for qualitative improvement of action planning.

• Journal of KIBIM
• /
• v.5 no.3
• /
• pp.19-32
• /
• 2015

For decades, the productivity issue has been a primary concern for the all stake-holders who participate in domestic construction industry. Especially, between a whole life cycle of building, the construction phase's productivity problem makes or break the entire project. In this respect, the general construction company, who accept the order and construct the building(so called General Contractor), should consider various strategies, such as schedule management, cost management, quality management, inner-crew management, etc., for the productivity improvement., and almost of these management methods have been studied for a long time. But, the researches and studies about the specialty contractor, who construct the building directly in construction site were not sufficiently complete yet. This research begins as an idea which tries to apply the BIM(Building Information Modeling) into the tasks of Specialty contractors for their productivity improvement. And for the effective application of construction BIM to specialty contractors, establish of the BIM project execution plan for them, not the fragmentary adoption of BIM. Therefore, in this paper, we develop the BIM project execution plan for the reinforced concrete companies who conduct the framework construction which located on CP(Critical Path) Especially, we model the "Construction BIM Use List for the RC Work", "BIM Application Master Process" and "BIM Application Detailed Process", and general contractor who use these BIM uses list and process models can manage various specialty contractors about schedule, cost, earned value, quality, safety and environment management systematically.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.16-23
• /
• 2020

In High-Intensity Focused Ultrasound (HIFU) treatment, effective localization of HIFU focus is important for developing a safe treatment plan. While Magnetic Resonance Imaging guided HIFU (MRIgHIFU) can visualize the ultrasound path during the treatment for localizing HIFU focus, it is challenging in ultrasound imaging guided HIFU (USIgHIFU). In the present study, a real-time ultrasound beam visualization technique capable of localizing HIFU focus is presented for USIgHIFU. In the proposed method, a short pulse, with the same center frequency of an imaging ultrasound transducer below the regulated acoustic intensity (i.e., Ispta < 720 mW/㎠), was transmitted through a HIFU transducer whereupon backscattered signals were received by the imaging transducer. To visualize the HIFU beam path, the backscattered signals underwent dynamic receive focusing and subsequent echo processing. From in vitro experiments with bovine serum albumin gel phantoms, the HIFU beam path was clearly depicted with low acoustic intensity (i.e., Ispta of 94.8 mW/㎠) and the HIFU focus was successfully localized before any damages were produced. This result indicates that the proposed ultrasound beam path visualization method can be used for localizing the HIFU focus in real time while minimizing unwanted tissue damage in USIgHIFU treatment.