• 한국항공우주법학회:학술대회논문집
• /
• 2008.05a
• /
• pp.165-182
• /
• 2008

The purpose of this study is to review the changes in the aviation safety management system, how that system has evolved and what forces caused these changes to take place. Also included is an examination of the development process of the aviation safety management system in view of the new institutionalism, identifying the patterns of change. Based on the results of this study, I propose policy methods to design a desirable civil aviation safety system with a view toward raising the safety standards in the Korean civil aviation community. The major analysis variables are as follows: first, aviation accidents caused by external factors and international standards as independent variables; second, environmental changes and political processes affecting aviation safety management system as major mediating variables; and third, the aviation safety management legal system, the aviation safety management organizations and an expert participation system as dependent variables. The institutional changes and continuance of the aviation safety management system show that when specific circumstances arise, the continuance lasts depending on the path dependency, and in a certain circumstance, when immanent changing factors reach a critical point, the system suddenly changes by a punctuated equilibrium, which are all included in this study.

• Transactions of Materials Processing
• /
• v.14 no.6 s.78
• /
• pp.514-519
• /
• 2005

A tube hydroformability testing system was designed and fabricated enabling to apply the forming condition along arbitrarily pre-programmed internal pressure-axial feed path. The free-bulging and T-forming tests were carried out on the extruded aluminum (A6063) tube specimens with 40.6 mm outer diameter and 2.25 mm thickness. Nine different combinations of internal pressure and axial feed, yielding different strain paths from one another, were taken into consideration in order to induce bursting at various deformation modes. Major and minor strains were automatically measured from deformed grids around the fracture using a stereo-vision-based surface strain measurement system, named ASIAS. The forming limit diagram of the A6063 tube material was successfully obtained. Most of the data points acquired from free bulging and T-forming tests appeared in the range of negative minor strain on the FLD and are mostly located near the strain paths calculated from explicit finite element simulations. The forming limit obtained from tests after pre-tension was considerably lower than that from tests without pre-tension, which showed the strain path-dependency of the forming limit as well known in the sheet forming fold.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.436-447
• /
• 2013

In this paper, Integrated circuit(IC) electromagnetic(EM) conducted immunity measurement and simulation using bulk current injection(BCI) and direct power injection(DPI) methods were conducted for 1.8 V I/O buffers. Using the equivalent circuit models developed for IC electromagnetic conducted immunity tests, we investigated the reliability of the frequency region where IC electromagnetic conducted immunity test is performed. The insertion loss for the noise injection path obtained from the simulation indicates that using only one conducted immunity test method cannot provide reliable conducted immunity test for broadband noise. Based on the forward power results, we analyzed the actual amount of EM noise injected to IC. We propose a more reliable immunity test methods for broad band noise.

• Korean Journal of Health Education and Promotion
• /
• v.21 no.3
• /
• pp.1-17
• /
• 2004

The purpose of this study is to evaluate the roles of expected self-control and expected self-control results in explaining adolescents' Internet addiction. In the study model, expectations of self-control and self-control results directly determine Internet addiction and Internet use time meditates the impacts of expectations of self-control and self-control results on Internet addiction. The study subjects are 1,080 middle and high school students in Busan. Stratified cluster sampling is applied by school type and school year. The response rate is 96%(l,037cases). This study develops the scales of expected self-control and expected self-control results. The scales of Internet addiction are devised by using the concept of functional dependency such as salience, withdrawal symptoms, mood modification, tolerance, relapse, and conflict. For verifying the study model, path analysis and multiple regression models are applied for identifying path significants and evaluating confounding effects of control variables, respectively. Moreover, multi partial F-test is performed for selecting the best regression model. Expected self-control is a significant determinant of Internet addiction and Internet use time that also significantly explains Internet addiction. The total effect of expected self-control towards Internet addiction is -.95. The total effect is comprised with the direct effect (-.71) and the indirect effect(-.24). In this result, the direct effect refers a curative effect since expected self-control directly reduces the level of Internet addiction, and the indirect effect refers a preventive effect because self-control can reduce time of Internet use that is a direct determinant of Internet addiction. In the test of the confounding effects of control variables, there are no confounding effects in the models of multiple regression. It implies a robustness of the study model as regards control variables. In conclusion, improving adolescents' expected self-control can control Internet addiction level. This finding implies that a health promotion program for improving expected self-control can be a cost effective method compared to other approaches.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.1-9
• /
• 2016

Computational Fluid Dynamics(CFD) is a branch of fluid mechanics that solves partial differential equations which represent fluid flows by a set of algebraic equations using computers. Even though it requires multifarious variables, only selected ones are stored because of the lack of storage capacity. It causes the requirement of secondary variable calculations at analyzing time. In this paper, we suggest an efficient method to estimate optimal calculation paths for secondary variables. First, we suggest a converting technique from a dependency graph to a ordinary directed graph. We also suggest a technique to find the shortest path from any initial variables to target variables. We applied our method to a tool for data analysis and visualization to evaluate the efficiency of the proposed method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.245-248
• /
• 2009

Recently, Many studies have been progressing to path-finding with dynamic information on the Terminal Based Navigation System(TBNS). However, the most of existing algorithms are based on $A{\ast}$ algorithm. Path-finding algorithms which use heuristic function may occur a problem of the increase of exploring cost in case of that there is no way determined by heuristic function or there are 2 way more which have almost same cost. In this paper, two abstract graph(AG) that are different method of construction, Homogeneous Node merging($AG^H$) and Connected Node Merging($AG^C$), are implemented. The abstract graph is a simple graph of real road network. The method of using the abstract graph is proposed for reducing dependency of heuristic and exploring cost. In result of evaluation of performance, $AG^C$ has better performance than $AG^H$ at construction cost but $AG^C$ has worse performance than $AG^H$ exploring cost.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.1
• /
• pp.8-20
• /
• 1999

In this paper, a design and estimation procedure for the stochastically dependent nonstationary multiple acceptance sampling plans is developed. At first, the rough-cut acceptance and rejection numbers are given as an initial solution from the corresponding sequential sampling plan. A Monte-Carlo algorithm is used to find the acceptance and rejection probabilities of a lot. The conditional probability formula for a sample path is found. The acceptance and rejection probabilities are found when a decision boundary is given. Several decision criteria and the design procedure to select optimal plans are suggested. The formula for measuring performance of these sampling plans is developed. Type I and II error probabilities are also estimated. As a special case, by setting the stage size as 1 in a dependent sampling plan, a sequential sampling plan satisfying type I and II error probabilities is more accurate and a smaller average sample number can be found. In a numerical example, a Polya dependent process is examined. The sampling performances are shown to compare the selection scheme and the effect of the change of the dependency factor.

• Smart Structures and Systems
• /
• v.6 no.1
• /
• pp.73-85
• /
• 2010

The potential offered by the thermo-mechanical properties of shape memory alloys (SMA) in structural engineering applications has been the topic of many research studies during the last two decades. The main issues concern the long-term predictability of the material behaviour and the fatigue lifetime of the macro structural elements (as different from the one of wire segments). The laboratory tests reported in this paper are carried out on bar specimens and they were planned in order to pursue two objectives. First, the creep phenomenon is investigated for two different alloys, a classical Ni-Ti alloy and a Cu-based alloy. The attention is then focused on the Cu-based alloy only and its fatigue characteristics at given temperatures are investigated. Stress and thermal cycles are alternated to detect any path dependency.

• Annual Conference on Human and Language Technology
• /
• 2018.10a
• /
• pp.50-54
• /
• 2018

관계 추출을 위한 원격 지도 학습은 사람의 개입 없이 대규모 데이터를 생성할 수 있는 효율적인 방법이다. 그러나 원격 지도 학습은 노이즈 데이터 문제가 있으며, 노이즈 데이터는 두 가지 유형으로 나눌 수 있다. 첫 번째는 관계 표현 자체가 없는 문장이 연결된 경우이고, 두 번째는 관계 표현은 있는 문장이지만 다른 관계 표현도 함께 가지는 경우이다. 주로 문장의 길이가 길고 복잡한 문장에서 두 번째 노이즈 데이터 유형이 자주 발견된다. 본 연구는 두 번째 경우의 노이즈를 줄임으로써 관계 추출 모델의 성능을 향상시키기 위해 확장된 최단 의존 경로를 사용하는 CNN 기반 관계 추출 모델을 제안한다. 본 논문에서 제안한 방법의 우수성을 입증하기 위해, 한국어 위키피디아와 DBpedia 기반의 원격 지도 학습 데이터를 수집하여 평가한 결과, 본 논문에서 제안한 방법이 위 문제를 해결하는데 효과적이라는 것을 확인하였다.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.1
• /
• pp.21-25
• /
• 2007

A two-dimensional TCAD MEDICI simulator was used to examine the voltage transfer characteristics, on-off switching properties and latch-up of a CMOS inverter as a function of the n-channel length and doping levels. The channel in a LDMOSFET encloses a junction-type source and is believed to be an important parameter for determining the circuit operation of a CMOS inverter. The digital logic levels of the output and input voltages were analyzed from the transfer curves and circuit operation. The high and low logic levels of the input voltage showed a strong dependency on the channel length, while the lateral substrate resistance from a latch-up path in the CMOS inverter was comparable to that of a typical CMOS inverter with a guard ring.