• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.247-256
• /
• 2024

The glass series modified by tungsten oxide was created using the compounds (75-x) B₂O₃- 10SrCO₃- 8TeO₂- 7ZnO - xWO₃, where x = 0, 1, 5, 10, 22, 27, 34, and 40% mole percentage. A UV-visible spectrophotometer and thermogravimetric-differential thermal analysis (TG-DTA) methods were employed to characterize the specimen's optical and phase transition attributes, respectively. The mass-attenuation coefficient (AC) of all created glasses from BSTZW0 to BSTZ7 was estimated using Geant4 code from 0.05 to 3 MeV and compared to the XCOM software results, with a relative difference of less than 2% between the two results. The increase of WO₃ percentage lead to an increase in the Linear-AC at each studied energy, and this is mainly due to the fact that the higher the percentage of WO₃ in the glass increases its density which causes an increase in the Linear-AC, so an energy of 0.06 MeV, as an example, the values of the Linear-AC was 4.009, 4.509, 5.442, 6812, 8.564, 9.856, 10.999 and 11.628 cm^-1 form BSTZW0 too BSTZW7, respectively. The Half-VL (value layer), Mean-FP (free path), Tenth-VL, and Radiation attenuation performance (RAP) were also calculated for the current BSTZW-glass samples and revealed that BSTZW7 had the best gamma ray attenuation performance at all discussed energies when compared to other studied glass samples.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1113-1124
• /
• 2004

In this paper, we proposed a hardware(H/W) structure which can compress and recontruct the input image in real time operation and implemented it into a FPGA platform using VHDL(VHSIC Hardware Description Language). All the image processing element to process both compression and reconstruction in a FPGA were considered each of them was mapped into H/W with the efficient structure for FPGA. We used the DWT(discrete wavelet transform) which transforms the data from spatial domain to the frequency domain, because use considered the motion JPEG2000 as the application. The implemented H/W is separated to both the data path part and the control part. The data path part consisted of the image processing blocks and the data processing blocks. The image processing blocks consisted of the DWT Kernel fur the filtering by DWT, Quantizer/Huffman Encoder, Inverse Adder/Buffer for adding the low frequency coefficient to the high frequency one in the inverse DWT operation, and Huffman Decoder. Also there existed the interface blocks for communicating with the external application environments and the timing blocks for buffering between the internal blocks The global operations of the designed H/W are the image compression and the reconstruction, and it is operated by the unit of a field synchronized with the A/D converter. The implemented H/W used the 69%(16980) LAB(Logic Array Block) and 9%(28352) ESB(Embedded System Block) in the APEX20KC EP20K600CB652-7 FPGA chip of ALTERA, and stably operated in the 70MHz clock frequency. So we verified the real time operation of 60 fields/sec(30 frames/sec).

• Geophysics and Geophysical Exploration
• /
• v.17 no.3
• /
• pp.137-146
• /
• 2014

This study presents a procedure for discrimination of artificial events from earthquakes occurred in and around the Korean Peninsula using data set in the Wonju KSRS seismograph network, Korea. Two training sets representing natural and artificial earthquakes were constructed with 150 and 56 events, respectively, with high signal to noise ratio. A frequency band, Pg(4-6 Hz)/Lg(5-7 Hz), which is optimal for the discrimination of seismic sources was derived from the two-dimensional grid of Pg/Lg spectral amplitude ratio. The corrections for the effects of earthquake magnitude and hypocentral distance were carried out for improvement of discrimination capability. For correcting the effect of magnitude dependence due to the inverse proportionality of corner frequency to seismic moment, the Brune's source spectrum was subtracted from the observation spectrum. The spectrum was corrected using the optimal damping coefficient to remove damping effect with the hypocentral distance. The effect of locally varying spectrum ratio was cancelled correcting variation of wave propagation along the ray path. The performance in discrimination between training sets of natural and artificial events was compared using the Mahalanobis distance in each step of correction. The procedure of magnitude, distance, and path corrections show clear improvements of the discrimination results with increasing Mahalanobis distance, from 1.98 to 3.01, between two training sets.

• Journal of Korean Home Economics Education Association
• /
• v.28 no.4
• /
• pp.123-137
• /
• 2016

This study's aim is to examine child's life competency that middle high school parents perceive and study the influence of parenting stress, parent efficacy, depression, parent education participation on child's life competency. The study was conducted towards parents who have children attending middle school and high school in Dae-jeon. Official cooperation documents were sent to middle schools and high schools located in Dae-jeon in April, 2013. Surveys were sent by e-mail and a total of 800 replies (excluding those with missing data) collected throughout December 10th to 20th, 2013 were used in the final data analysis. SPSS 23.0 and AMOS 23.0 programs were used for analysis and subject's general characteristics and percentage were analyzed. Pearson's product moment correlation coefficient was used in order to examine the variant's relation. Path model analysis was used to study variant's path and direct and indirect effects of the paths were analyzed as well as the significance. The study's results showed that child life competency and related variants had a high correlation and path model analysis showed that parenting stress, parent efficacy, depression, participation of parent education had a direct and indirect influence on child's life competency. Parenting stress has influence on parent efficacy and depression, but parent education has a different influence on child's life efficacy according to participation. Based on these results, policy suggestions are made throughout family academic perspectives in order to enhance child's life competency.

• Journal of Service Research and Studies
• /
• v.12 no.4
• /
• pp.106-124
• /
• 2022

This study examined whether the social support (emotional support, information support) provided by customers through chatbot service affects the satisfaction of chatbot service felt by customers and whether the satisfaction of chatbot service affects loyalty and intention to continue using chatbot service. In order to confirm the moderating effect of social presence of chatbot service, a total of 300 effective data were obtained by conducting an online survey divided into a group that recognizes social presence highly and a group that recognizes low. As a result of the analysis, the path from emotional support to satisfaction of chatbot service was supported in the group that recognized social presence highly, and the path from emotional support to satisfaction of chatbot service was not supported in the group that recognized social presence low, and the difference was confirmed in the hypothesis path coefficient. This is interpreted as the social presence affecting human emotional response.This study can provide implications for the function of social presence of chatbot service in that it applied information support and emotional support, which are two factors of social support, to chatbot service, and demonstrated the relationship between satisfaction, loyalty, and continuous use according to the degree of social presence of chatbot users.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.91-100
• /
• 2004

Plate heat exchangers (PHE) have been widely used in different industrial applications, because of high heat transfer efficiency per unit volume. Basic study is performed for PHE to the application of intercooler in automobile. In order to understand the flow phenomena in the plate heat exchanger, a channel which was formed by the upper and lower plate in single plate was considered as calculation domains. Because chevrons attached on the upper plate are brazed with chevrons attached on the lower plate, the flow channel has very complex configuration. This complex geometry was analyzed by Fluent. In order to validate this methodology the proper experimental and theoretical data are collected and compared with numerical results. Finally, due to the lack of experimental values for PHE to the application of intercooler, various chevron angles and air velocities at inlet were tested in terms of physical phenomena. From this point of view, results of velocity vector, path lines, static pressure, heat flux, heat transfer coefficient, and Nusselt number are physically reasonable and accepted for the solutions. From these results, the correlations for pressure drop and Nusselt number with respect to chevron angle and Reynolds number in specific PHE are obtained for the design purpose. Thus, the methodology of the flow analysis in the full geometry of the channel was established for the predictions of performance in plate heat exchanger.

• Fire Science and Engineering
• /
• v.27 no.2
• /
• pp.75-79
• /
• 2013

The present study measured the light transmission to quantify the smoke density(smoke mass concentration) through the doorway in a compartment fire and performed the uncertainty analysis to evaluate the reliability of the measurement technique. The optical light extinction method based on Bourguer's law was applied to estimate the smoke density of doorway exhausting smoke flow in upper layer of a compartment for methane gas fires. The measurement uncertainty of the light extinction measurement was evaluated for the light transmittance, path length, and specific mass extinction coefficient and the expanded uncertainty was estimated about 20% with confidence level of 95%. The mean smoke density through the doorway for the methane fire was calculated for quasi-steady fire and the smoke density linearly increased as the GER increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.1
• /
• pp.56-67
• /
• 2012

This research investigates the effect of the antecedents (i.e. specific investment, opportunistic behavior, communications, uncertainty, interdependence, power imbalance, shared value, and flexibility) that influence the trust and commitment of domestic apparel manufacturers toward contractors as well as the effect of trust and commitment on firm performance and relationship satisfaction. A total of 128 apparel manufactures participated in this study. Factor analysis, Cronbach's alpha coefficient, and path analysis were conducted for the statistical analysis. Specific investment, communication, shared value, and flexibility had a positive effect on trust; however, opportunistic behavior had a negative effect. Interdependence, shared value, and flexibility had a positive effect on commitment; however, power imbalance and uncertainty had a negative effect. Trust did not exert an effect on commitment in this research; however, trust and commitment had a positive effect on firm performance; in addition, trust and commitment had a positive effect on relationship satisfaction. The findings offer insight on how to better manage apparel manufacturer-contractor relationships to ensure success.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.243.2-243.2
• /
• 2016

Tungsten (W) is recently gaining attention as a potential candidate to replace Cu in semiconductor metallization due to its expected improvement in material reliability and reduced resistivity size effect. In this study, the impact of electron scattering at grain boundaries in a polycrystalline W thin film was investigated. Two nominally 300 nm-thick films, a (110)-oriented single crystal film and a (110)-textured polycrystalline W film, were prepared onto (11-20) Al2O3 substrate and thermally oxidized Si substrate, respectively in identical fabrication conditions. The lateral grain size for the polycrystalline film was determined to be $119{\pm}7nm$ by TEM-based orientation mapping technique. The film thickness was chosen to significantly exceed the electron mean free path in W (16.1 and 77.7 nm at 293 and 4.2 K, respectively), which allows the impact of surface scattering on film resistivity to be negligible. Then, the difference in the resistivity of the two films can be attributed to grain boundary scattering. quantitative analyses were performed by employing the Mayadas-Shatzkes (MS) model, where the grain boundary reflection coefficient was determined to be $0.42{\pm}0.02$ and $0.40{\pm}0.02$ at 293 K and 4.2 K, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.12
• /
• pp.1667-1672
• /
• 2003

In contrast to the high demand for MEMS devices, microflow analysis is not feasible even for single-phase flow with conventional Navier-Stokes equation because of non-continuum effect when characteristic dimension is comparable with local mean free path. DSMC is one of particle based DNS(Direct Numerical Simulation) methods that uses no continuum assumption. In this paper, gas flow in microchannel is studied using DSMC. Interfacial shear and flow characteristics are observed and compared with the results of gas flow that is in contact with liquid case and solid wall case. The simulation is limited to the case of equilibrium steady state and evaporation/condensation coefficient is assumed to be the same and unity. System temperature remains constant and the interfacial shear appears to be small compared to the result with solid wall. This is because particles evaporated and reflected from the liquid surface form high density layer near the interface with liquid flow.