• Preventive Nutrition and Food Science
• /
• 제21권4호
• /
• pp.367-372
• /
• 2016

To understand the effects of adding different gums (guar, xanthan, and locust bean gums) on naked barley flour (NBF), the rheological and pasting properties of NBF-gum mixtures were measured at different gum concentrations (0, 0.3, and 0.6% w/w). Steady shear rheological properties were determined by rheological parameters for power law and Casson models. All samples showed a clear trend of shear-thinning behavior (n=0.16~0.48) and had a non-Newtonian nature with yield stress. Consistency index, apparent viscosity, and yield stress values increased with an increase in gum concentration. Storage modulus values were more predominant than loss modulus values with all concentrations of gums. There is a more pronounced synergistic effect of elastic properties of NBF in the presence of xanthan gum. Rapid visco analyser pasting properties showed that the addition of gums resulted in a significant increase in the peak, breakdown, setback, and final viscosities, whereas the pasting temperature decreased.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.329-329
• /
• 2017

The study was conducted to investigate the effects of different harvesting time on pasting properties of starch in three colored rices. Seven major parameters of starch pasting properties, peak viscosity (PKV), hot pasting viscosity (HPV), cool pasting viscosity (CPV), setback (CPV minus PKV), breakdown (PKV minus HPV), peak time, and pasting time were determined by Rapid Visco Analyzer. The peak viscosity, hot viscosity, cool viscosity and peak time were influenced by different harvesting times. Pasting time was delayed slightly with prolonged harvesting time in all rice cultivars. Pasting temperature in each rice cultivar differed from each harvesting time, and pasting temperature of the two rice cultivars, Hongjinju and Joseongheugchal, showed the highest at the 40 days after heading and then it decreased at the final harvesting time. With the delay of the harvesting time, peak viscosity, hot viscosity, cool viscosity, setback value and pasting temperature did not exhibit a regular trend depending on their genetic characteristics. Branch chain length distribution of amylopectin was demonstrated a distinct difference among these colored rices. In changes of amylopectin branch chain-length distribution, the amylopectin structure of Hongjinju rice cultivar as affected by different harvesting time, the shortest chain length of amylopectin in rice starch harvested at 20 days after heading was characterized by the significant increase in A chains with $DP{\geq}12$ and remarked decrease in long chains $37{\leq}DP$ compared to that of 30, 40, and 50 days after heading. In particular, when harvesting time is delayed the distribution percentage of short chain (A chains with $DP{\geq}12$) was increased except for the rice which harvested 20 days after heading. The similar results were also observed in Sintoheugmi rice cultivar like that of Hongjinju rice cultivar. Otherwise, distribution percentage of the shortest chain length of amylopectin in rice starch harvested at 20 days after heading was characterized by the significant decrease in A chains with $DP{\geq}12$ and remarked increase in B chains $13{\leq}DP{\geq}24$ compared to that of 30, 40, and 50 days after heading.

• Journal of Applied Biological Chemistry
• /
• 제49권3호
• /
• pp.95-100
• /
• 2006

Brown rice with a giant embryo (GE) was observed on the quality parameters of the enlargement of embryo, nutritional components, and physical properties, in comparison to normal embryo brown rice (NE). Also, the effects of germination on the quality parameters were examined. GE embryo was approximately 2.68 times larger than of NE rice. Total free sugars were significantly higher in GE rice (71.96 vs. 41.17 mg/100 g), and germinated rice increased in fructose, but decreased in sucrose and maltose. No significant difference in mineral contents was found in GE and NE rice and their germinated rice, whereas a significant increment was observed on reducing sugars and gamma-amino butyric acid (GABA) contents in GE rice. The lower water absorption index (WAI) of GE rice resulted in relatively lower pasting viscosity, whereas the increased WSI in germinated rice might be attributable to the significant increment of soluble components in GE rice.

• 한국식품과학회지
• /
• 제46권2호
• /
• pp.135-142
• /
• 2014

국내에서 육종한 11가지 고구마의 전분 특성을 구명하여 새로운 식품 소재의 개발을 위한 기초자료로 이용하고자 전분의 이화학, 호화 및 소화 특성을 조사하였다. 아밀로스 함량은 12.5-17.4%의 범위를 보였으며, 아밀로펙틴 가지 사슬 분포는 시료 간에 유사하였다. 증미 전분의 아밀로펙틴 분자량이 가장 컸으며 대유미 전분은 가장 낮은 값을 보였다. 모든 고구마 전분의 X선 회절 양상은 C형 중에서도 A형에 가까운 $C_a$형을 나타내었다. 시차주사열량계로 측정한 열 특성에서 11품종 고구마 전분 중 신율미와 증미의 호화 온도가 높았고, 해피미는 낮았다. Rapid Visco Analyser로 페이스트 특성을 살펴보았을 때, 호화시간은 전분 입자의 크기, 최고점도, 강하점도와 음의 상관을 나타내었으며, 해피미가 가장 낮은 호화 온도와 치반점도를 보였고 강하점도와 최고점도 및 최종점도가 높았다. 소화 특성에서 증미의 RS 함량이 가장 많았으며, 신율미와 해피미는 SDS 함량이 많았다.

• 한국식품저장유통학회지
• /
• 제30권6호
• /
• pp.918-928
• /
• 2023

The effects of tigernut dietary fiber (TDF: 5, 10, and 20% w/w) inclusion in rice muffin formulations on the functional and pasting properties of composite powders, as well as the nutritional and sensory properties of muffins were investigated. The results showed a significant (p<0.05) proportional increase in the water and oil holding capacity as TDF increased in the powder blends. Moreover, pasting viscosity was found to decrease with the inclusion of TDF. TDF muffins showed improved nutritional quality, with increased protein (~14%), insoluble fiber (~128%) and total fiber (~34%) contents compared to 100% rice muffins. Also, TDF-muffins had lower baking losses (~22%) and better texture, including firmness and chewiness. Sensory scores of TDF-muffins (up to 10% w/w) showed similar consumer acceptability for all parameters considered. Overall, this study suggests tigernut fiber as a functional additive that balances the growing consumers' demands for healthy and quality gluten-free rice muffins.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권1호
• /
• pp.23-29
• /
• 2003

Stencil is used normally as a mask for solder pasting on pad of a printed circuit board (PCB). The objective of this study is to develop a stencil cutting system and determine the optimal conditions to make good-quality stencil by using a Nd:YAG laser. The effects of process parameters such as laser power, type of mask, gas pressure, cutting speed and pulse duration on the cut edge quality were investigated. In order to analyze the cut surface characteristics (roughness, kerfwidth, dross) optical microscopy, SEM microscopy and roughness measurements were used. As a result, the optimal conditions of cutting process parameters were determined, and the practical feasibility of the proposed system was also examined by using a commercial Gerber file for PCB stencil manufacturing.

• 한국작물학회지
• /
• 제64권4호
• /
• pp.441-451
• /
• 2019

최근 식용 위주에서 가공으로 용도가 다양화 되고 있어 괴근 수량 및 기능성 물질 등 괴근 품질 특성차이를 조사하여 용도별 고구마 품종 개발 및 가공 연구 등에 활용할 수 있는 기초자료를 얻고자 국내외에서 수집된 고구마 181유전자원을 공시하여 실험을 실시한 결과는 다음과 같다. 1. 만장은 최대 354.8 cm, 최소 32 cm, 평균길이는 112.3 cm였다. 분지수는 평균 3.1개였으나 IT232091가 특이적으로 23.0개로 가장 많았다. 마디수는 17.4에서 67.8개로 다양한 분포를 나타내었으며 평균 40.7개였다. 괴근수는 주당 30~50개 범위가 75자원로 가장 많았으며, 괴근 무게는 주당 0.5~1.0 kg 범위가 76자원으로 가장 많았다. 2. 전분의 호화개시온도는 IT232197가 가장 높았으며, IT232134가 가장 낮았다. 최고점도는 IT232050가 가장 높게 나타났으며, IT232176가 가장 낮았다. 강하점도는 IT232010가 가장 높게 나타났으며, IT232101이 가장 낮았다. 최저점도는 IT232019가 가장 낮게 나타났다. IT232101는 가장 높은 최종점도(284.6 RVU)를 나타냈다. 치반점도는 최대 81.7 RVU (IT232192)에서 최소 40.8 RVU(IT232101)의 범위로 나타났다. 전분의 안정성은 IT232101가 0.65로 가장 높았으며 IT232019가 0.20으로 가장 낮게 나타났다. 3. 총 폴리페놀 함량과 DPPH 라디칼 소거능이 높은 고구마를 각각 20자원씩 선발하였으며 그 중 IT232197을 포함하여 15자원이 중복된 자원임을 알게 되었다. 상관관계 분석 결과 폴리페놀함량이 높을수록 DPPH 라디칼소거능이 증가함을 알 수 있었다. 4. 당도 범위는 최대 33.3 °Bx에서 최소 13.5 °Bx로 나타났으며, 평균 23.2°Bx의 당도를 나타냈다. 전분 함량은 최대 20.7%에서 최소 5.2%로 나타났으며, 평균 11%의 전분 함량을 나타냈다. 수분함량은 70~80%범위가 52.5%, 60~70%의 수분함량이 44.2%의 빈도를 나타내었다.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.106-113
• /
• 2002

Stencil is used normally as a mask for seeder pasting on pad of PCB. The objective of this study is to develop stencil cutting system and determine optimal conditions which make good-quality stencil by using a Nd:YAG laser. The effects of process parameters such as laser power, type of mask, gas pressure, cutting speed and pulse width old the cut edge quality were investigated. In order to analyse fille cut surface characteristics(roughness, kerf width, dross) optical microscopy, SEM photography and roughness test were used. As a result, the optimal conditions of process parameters were determined, and the practical feasibility of the proposed system is also examined by using a commercial Gerber file for PCB stencil manufacturing.

• Food Science and Biotechnology
• /
• 제15권6호
• /
• pp.860-865
• /
• 2006

The quality parameters of sponge cake supplemented with soy protein concentrate (SPC) were evaluated. The addition of SPC to wheat flour increased the protein content and alkaline water retention value, but decreased the sedimentation value. Protein content had a positive correlation with the alkaline water retention value, and a negative correlation with the sedintentation value. The higher the concentration of SPC, the higher the RVA pasting temperature and the lower the viscosity. Increasing the level of SPC in flour led to a decrease in mixogram peak time, whereas peak height, width at peak, and width at 8 min progressively increased. As the amount of SPC increased in the formulation, the pH and specific gravity of cake batter increased, whereas the volume and specific volume of sponge cake decreased. The total isoflavones content in SPC increased after heat treatment. The hardness, gumminess, and chewiness increased progressively in accordance with increasing level of SPC.

• 한국식품영양과학회지
• /
• 제27권5호
• /
• pp.908-913
• /
• 1998

Chemical components and some physical proeprties of fresh, defrosted and dried yams(Dioscoreab batatas) were determined to obtain basic data for high quality yam processing. Fresh yam showed 81.79% moisture and 15.24% N-free extract. The cohesiveness and adhesiveness of defrosted yam homogenate were significantly higher than those of fresh yam homogenate. Free sugars of yam were mainly composed of sucrose, rhamnose, fructose and glucose, and the contents of fructose and glucose were apparently decreased by hot air drying. Linoleic(45.64%), oleic(8.32%), and arachidic acids(7.40%) were major fatty acids of yam. Hot air drying caused a decrease in unsaturated fatty acids and an increase in saturated acids. Hot air-dried yam powder showed higher gelatinization properties than freeze-dryed yam powder, such asinitial pasting temperature, temperature at maximum viscosity, and viscosity at different parameters. Hot air-dried yam powder showed higher Hunter parameter b and ΔE values and lower L value than freeze-dried one.