• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.2
• /
• pp.140-148
• /
• 2024

This study aimed to enhance the physicochemical properties of sodium iodide-based root filling materials, particularly solubility. In earlier developmental stages, the iodoform-containing paste exhibited high antibacterial efficacy but failed to meet only the solubility requirement among the ISO 6876 criteria. Therefore, this study focused on enhancing the physicochemical properties of the paste under development, particularly centering on reducing its solubility. Four experimental groups were established, including three control group. The previously developed D30 paste was named the Oil 33 group, and the control group was named the Vitapex^® group. The Oil 50 group, in which the oil content was increased, and the Oil 45L group, in which lanolin was incorporated. The physical properties (solubility, pH, flowability, and film thickness) of the four pastes were evaluated according to the ISO 6876 standards. No significant differences were observed between the Oil 45L and Vitapex^® groups in any of the physical property evaluations. While the Oil 33 and Oil 50 groups met the ISO 6876 standards for flowability and film thickness, the Oil 45L group met all the physical properties. However, reducing the overall oil content may be necessary to enhance the antimicrobial properties. The result of the physicochemical experiments showed that the Oil 45L group with the newly formulated composition and incorporated lanolin exhibited low solubility meeting the ISO 6876 standard of ≤ 3%. We were able to develop a paste with more stable solubility than previous iodide-based root-filling materials. Therefore, the oil content must be further adjusted to improve its antimicrobial properties. If other physical properties also meet the ISO 6876 standards and demonstrate excellent results in cytotoxicity tests, this root filling material could potentially replace existing options.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.2
• /
• pp.305-311
• /
• 1999

The volatile compounds of soybean pastes(home made soondoenjang, commercial doenjang) were classified into basic, acidic and neutral fractions by dynamic headspace method. The fractionated flavor isolates were analyzed and identified by gas chromatography mass spectrometry. Each peak area of the flavor components was quantified at its ratio to the peak area of internal standard. Sixty one compounds from home made soondoenjang, and forty three compounds from commercial doenjang were identified. The different distribution of volatile compounds between the two soybean paste samples was observed. Ten pyrazines and benzothiazole were identified in the basic fraction of home made soondoenjang. On the other hand, trimethylpyrazine was the only one of nitrogen containing compounds in the commercial doenjang, which was made from soybean(28.3%), wheat(22.2%) and alcohols. The factors which influenced the levels of these identified compounds were considered to be the starting materials of soybean paste. Alcohols, esters and aldehydes in the neutral fraction of both samples were seemed to be characterisitic soybean paste flavor and showed much higher quantities than those of the basic or acidic fractions. Furfural in the commercial doenjang was the highest content (45.28ppm) among all of the compounds identified in the samples.

• International Journal of Concrete Structures and Materials
• /
• v.3 no.2
• /
• pp.81-90
• /
• 2009

This paper proposes a semi analytical model to describe the pore structure of concrete by a set of simple equations. The relationship between the porosity and the microstructure of concrete has been considered when constructing the analytical model. The microstructure includes the interface transition zone (ITZ) between aggregates and cement paste. The predicting model of porosity was developed with considering the ITZ for various mixing of mortar and concrete. The proposed model is validated by the rapid experimental programs. Although the proposed model is semi-analytical and relatively simple, this model could be reasonably utilized for the durability design and adapted for predicting the service life of concrete structures.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.57-60
• /
• 2005

Composite-to-aluminum joins were tested to get failure loads and modes for three types of joins; adhesive bonding, bolt fastening, and adhesive-bolt hybrid joining. Film type adhesive FM73 and paste type adhesive Cytec EA9394S were used for aluminum and composite bonding to make a double-lap joint. A digital microscope camcorder was used to monitor the failure initiation and propagation. It was found that the hybrid joining is an effective method to strengthen the joint when the mechanical fastening is stronger than the bonding as in the case of using the paste type adhesive. On the contrary, when the strength of the bolted joint is lower than the strength of the bonded joint as in the joint with the film type adhesive, the bolt joining contribute little to the hybrid joint strength.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.196-201
• /
• 2010

The influence of red lead($Pb_3O_4$) to curing and formation reaction properties when it was added in positive material of lead acid battery for vehicle use has been investigated. At the results, it was confirmed that the addition of red lead led 4BS crystal size to be smaller and increased the rates of 4BS formation and Pb consumption. Consequently the curing time was shortened to half compared with that of red lead-free one. In addition to this, the lead acid battery prepared by adding red lead showed 14% higher efficiency at the life cycle test than that without red lead.

• Journal of the Korean Society of Food Culture
• /
• v.1 no.2
• /
• pp.101-115
• /
• 1986

This study was designed to establish Korean food culture by analizing 17 sets of Jinyounuigue(진연의궤) Jinchanuigue(진찬의궤), and Jinjarkuigue(진작의궤) which were the records of royal party procedures in Yi dynasty. Side dishes were classified into 20 groups in this study ; Tang (場) 19, Jungol (전골) 3, J'im 18, Jun (전) 20, Jock 14, Pyunuk (片肉) 14, Cho 12, Hyae 17, Po 8, Chae 3, Bung 1, Nanri 1, Sooran 1, Sookran 1, Jaban 1, Kimchi 2, etc. all of 140 different kinds of side dishes. There was no tendency in omission or addition of food materials. Food materials were beef, pork, lamb, chicken, duck, peasant meat, dock's egg, fish, shellfishes, mollusca, curstacea, seaweeds, vegetables, fruits, beancurds, muk (a starch jelly), d'ock, muchrooms, etc. Seasonings were soysauce, pepper, sesame oil, ginger, green-onion, garlic, bean paste, ginger powder, red pepper powder, red pepper paste, salts, vinegar, honey, sesame power, etc.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.95-96
• /
• 2000

The effect of $Al_2O_3$ on the dielectric constant and the coefficient of thermal expansion of lead borosilicate glasses for the application of PDP glass paste was investigated. Measurements were made theoretically by using empirical equations on the composition of the of glasses in which the $PbO/Al_2O_3$, $B_2O_3/Al_2O_3$ and $SiO_2/Al_2O_3$ ratios were systematically varied. As a result, with increasing $PbO/Al_2O_3$ the thermal expansion coefficient and the dielectric constant noticeably increased, while the change of $B_2O_3/Al_2O_3$ and $SiO_2/Al_2O_3$ ratios did not affect those properties of the glasses.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.186-187
• /
• 2013

Recently, high fluidity concrete is becoming more prevalent. High fluidity concrete uses admixture or thickener in order to prevent separation of materials due to increased fluidity, and, especially, BS is becoming more use for reduced heat of hydration and improved long-term strength. This study examined the effect of BS on fluidity of cement paste from a rheological viewpoint. As for BS types, materials equivalent to 1 types of KS F 2563 and the cement mass was substituted by 20, 40, 60, 80%.

• Restorative Dentistry and Endodontics
• /
• v.6 no.1
• /
• pp.27-35
• /
• 1980

This study was to evaluate the effectiveness of a few disinfectant on amputated pulps of domestic dogs. The materials employed for the purpose were zinc oxide eugenol paste, calcium hydroxide as control groups and guaiacol (1%, 5%, 10% by weight) added zinc oxide eugenol paste and formaldehyde (1%, 5%, 10% by weight) added calcium hydroxide as experimental groups. Following were the results obtained throngh histo-pathological examination. 1) In calcium hydroxide-formaldehyde groups, secondary dentin formation was observed in the 2 weeks, but the remaining pulp tissue was severely atrophied according to the concentration of formaldehyde and the time increased. 2) In zinc oxide eugenol-guaiacol groups, the first evidence of secondary dentin formation was observed in the 3 weeks. It seems that the concentration variety of guaiacol influenced very little to the potential ability of dentin formation. 3) Except 1% formaldehyde containing calcium hydroxide group, every group showed severe pulp degeneration. In all groups of zinc oxide eugenol-guaiacol cases revealed the tendency of recovery.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.212-213
• /
• 2006

Polymer thick film resistor paste was fabricated using various materials. Inorganic materials of carbon black and graphite were selected as fillers and epoxy resin was selected as organic material. Solvent with high boiling temperature was applied to adjust viscosity. A designed test coupon pattern was used to evaluate fabricated resistors. Aspect ratio of 1 was selected for evaluating resistor values. Electrical properties of fabricated resistors were measured and their values analyzed in relation to paste composition. PTF fabricated using carbon black as fillers achieved resistor value of $530{\Omega}/sq$.