• 제목/요약/키워드: passive suspension

검색결과 89건 처리시간 0.023초

Vibration isolation with smart fluid dampers: a benchmarking study

  • Batterbee, D.C.;Sims, N.D.
    • Smart Structures and Systems
    • /
    • 제1권3호
    • /
    • pp.235-256
    • /
    • 2005
  • The non-linear behaviour of electrorheological (ER) and magnetorheological (MR) dampers makes it difficult to design effective control strategies, and as a consequence a wide range of control systems have been proposed in the literature. These previous studies have not always compared the performance to equivalent passive systems, alternative control designs, or idealised active systems. As a result it is often impossible to compare the performance of different smart damper control strategies. This article provides some insight into the relative performance of two MR damper control strategies: on/off control and feedback linearisation. The performance of both strategies is benchmarked against ideal passive, semi-active and fully active damping. The study relies upon a previously developed model of an MR damper, which in this work is validated experimentally under closed-loop conditions with a broadband mechanical excitation. Two vibration isolation case studies are investigated: a single-degree-of-freedom mass-isolator, and a two-degree-of-freedom system that represents a vehicle suspension system. In both cases, a variety of broadband mechanical excitations are used and the results analysed in the frequency domain. It is shown that although on/off control is more straightforward to implement, its performance is worse than the feedback linearisation strategy, and can be extremely sensitive to the excitation conditions.

차량 롤 주행안정성 향상을 위한 RSC (Roll Stability Control) 성능 해석에 관한 연구 (A Study on the Performance Analysis of RSC (Roll Stability Control) for Driving Stability of Vehicles)

  • 권성진
    • 대한임베디드공학회논문지
    • /
    • 제17권5호
    • /
    • pp.257-263
    • /
    • 2022
  • Active stabilizers use signals such as steering angle, yaw rate, and lateral acceleration to vary the roll stiffness of the front and rear suspension depending on the vehicle's driving conditions, and are attracting attention as RSC (Roll Stability Control) system that suppresses roll when turning and improves ride comfort when going straight. Various studies have been conducted in relation to active stabilizer bars and RSC systems. However, accurate modeling of passive stabilizer model and active stabilizer model and vehicle dynamics analysis result verification are insufficient, and performance result analysis related to vehicle roll angle estimation and electric motor control is insufficient. Therefore, in this study, an accurate vehicle dynamics model was constructed by measuring the passive/active stabilizer bar model and component parameters. Based on this, the analysis result with high reliability was derived by comparing the roll angle estimation algorithm based on the lateral acceleration and suspension of the vehicle with the actual vehicle driving test result. In addition, it was intended to accurately analyze the motor torque characteristics and roll reduction effects of the electric motor-driven RSC system.

MR 댐퍼 반능동 현가시스템의 승차감향상을 위한 수정된 민감도제어 (Modified Sensitivity Control of a Semi-Active Suspension System with MR-Damper for Ride Comfort Improvement)

  • 김태식;김내관;박재우;허창도;홍금식
    • 대한기계학회논문집A
    • /
    • 제31권1호
    • /
    • pp.129-138
    • /
    • 2007
  • In this paper, a modified sensitivity control for the semi-active suspension system with a magneto-rheological (MR) damper is investigated. A 2-d.o.f quarter-car model together with a 6th order polynomial model for the MR damper is considered. For the purpose of suppressing the vertical acceleration of the sprung mass, the square of the vertical acceleration is defined as a cost function and a modified sensitivity control that updates the current input in the negative gradient of the cost function is proposed. The implementation of the proposed algorithm requires only the measurement of the relative displacement of the suspension deflection. The local stability of equilibria of the closed loop nonlinear system is proved by investigating the eigenvalues of the linearized ones. Through simulations, the passive suspension, the skyhook control, and the proposed modified sensitivity control are compared.

스카이훅 시스템에의 능동 서스펜션 제어 이론 적용에 관한 연구 (A Study on Adopting Active Suspension Control in Sky Hook System)

  • 박중현;장승재
    • 한국정보통신학회논문지
    • /
    • 제10권5호
    • /
    • pp.950-955
    • /
    • 2006
  • 본 논문에서는 스카이훅댐퍼 시스템의 해석 및 설계에 능동 서스펜션 제어 이론을 적용하여 현가장치설계에 응용 할 수 있는 이론 및 실험 적 제어장치 적용에 관한 연구를 수행하였다. 최근의 현가장치설계에서는 강성과 감쇠를 능동적으로 제어하는 기술의 적용이 일반화되고 있으며, 다른 차량안정성 제어장치와의 연계성이 높아짐에 따라, 제어 시스템설계에서 보다 내구성 이 강하고 제어효과의 응답성이 빠르며 정도 또한 높은 제어장치의 필요성이 요구되고 있다. 본 연구는 댐퍼의 위치관계에 따른 스카이훅시스템을 해석하여 위와 같은 빠른 응답성과 높은 정도의 제어가 가능한 제어시스템을 해석, 설계하기 위하여 강인제어시스템의 적용에 관한 고찰을 하였다. 그리고 제어대상시스템에 대한 강인제어시스템을 설계하기 위한 모델링 및 적용방법을 수식적으로 해석하였으며, 스카이훅현가장치의 제어시 스템설계에 중요한 내외란성 향상을 위한 강인제어시스템설계에 적용하는 방법에 관해 고찰하였다.

HILS를 활용한 전투차량의 반능동 현수장치 적용에 관한 연구 (A Study on the Appication of Semi-Active Supension Units for a Combat Vehicle by Using HILS)

  • 김지웅;김문준;이은준;이경훈;우관제
    • 한국군사과학기술학회지
    • /
    • 제13권6호
    • /
    • pp.967-975
    • /
    • 2010
  • There have been a lot of efforts on the improvement for the ride comfort and handling stability of the combat vehicles. Especially most of vehicles for military purpose have bad inertial condition and severe operating condition such as the rough road driving, and need a high mobility in the emergency status. It is necessary to apply the controlled suspension system in order to improve the vehicle mobile stability and ride comfort ability of crews. A feasibility study is performed on the application of the semi-active suspension system with a magneto-rheological controlled shock absorber for a $6{\times}6$ combat vehicle. First, the dynamic simulation model of the vehicle including the control model for the semi-active suspension system was executed. Based on this model, a hardware-in-the-loop simulation(HILS) system which has a semi-active suspension controller hardware was constructed. After full vehicle simulations were performed in virtual proving courses with this system, the semi-active suspension system was proven to give better ride comfort and handling stability in comparison with the conventional passive suspension system.

Antigenicity of HM10760 in Guinea Pigs

  • Choi, Woo-Hyuck;Lee, Sung-Hak;Lee, Mi-Chael;Chung, Moon-Ku;Kwon, Se-Chang;Lee, Gwan-Sun;Han, Jae-Yong;Koh, Woo-Suk
    • Toxicological Research
    • /
    • 제21권3호
    • /
    • pp.241-247
    • /
    • 2005
  • HM10760 is a recombinant human erythropoietin that has beer developed as a drug for anemia. In this study, antigenic potential of HM10760 was examined by active systemic anaphylaxis in guinea pigs and passive cutaneous anaphylaxis in a guinea pig-guinea pig system. HM10760 was subcutaneously administered at 0, 2, and $20{\mu}g/kg$ and also as a suspension with adjuvant ($20{\mu}g/kg$ + FCA). Ovalbumin as a suspension with adjuvant was administered to induce positive control responses. In the active systemic anaphylaxis test, no symptoms except rubbing or licking nose and urination that were considered as physiological phenomena were observed at $0{\mu}g/kg$. Four of 5 animals at $2{\mu}g/kg$ and all the 5 animals at $20{\mu}g/kg$ showed cyanosis and lying on side. All animals in the adjuvant mixture group showed relatively mild symptoms such as rubbing or licking nose, urination, and evacuation. In the passive cutaneous anaphylaxis test, 0/5, 3/5, and 5/5 serum samples from the animals immunized with 0, 2, and $20{\mu}g/kg$, respectively, showed positive reactions against HM10760. All 5 sera collected from the animals immunized with an adjuvant mixture contained HM10760-specific antibodies. These results suggest HM10760 have antigenicity in guinea pigs.

센서위치를 고려한 능동 서스펜션 강인제어에 관한 연구 (A Study on Active Suspension Robust Control with Sensor and Actuator Location)

  • 박중현;장승재
    • 한국정보통신학회논문지
    • /
    • 제10권6호
    • /
    • pp.1147-1152
    • /
    • 2006
  • 본 논문에서는 스카이훅댐퍼 시스템의 해석 및 설계에 능동 서스펜션 강인제어 이론을 적용하여 현가장치설계에 응용 할 수 있는 이론 및 실험적 제어 장치 적용에 관한 연구를 수행하였다. 최근의 현가장치설계에서는 강성과 감쇠를 능동적으로 제어하는 기술의 적용이 일반화되고 있으며, 다른 차량안정성제어장치와의 연계성이 높아짐에 따라, 제어시스템설계에서 보다 내구성이 강하고 제어효과의 응답성이 빠르며 정도 또한 높은 제어장치의 필요성이 요구되고 있다. 본 연구는 센서의 위치 관계에 따른 능동현가시스템을 해석하여 위와 같은 빠른 응답성과 높은 정도의 제어가 가능한 제어시스템을 해석, 설계하기 위하여 강인제어시스템의 적용에 관한 고찰을 하였다. 그리고 제어대상시스템에 대한 강인제어시스템을 설계하기 위한 모델링 및 적용방법을 수식적으로 해석하였으며, 스카이훅현가장치의 제어시스템설계에 중요한 내외란성 향상을 위한 강인제어 시스템설계에 적용하는 방법에 관해 고찰하였다.

Optimal Design of Discrete Time Preview Controllers for Semi-Active and Active Suspension systems

  • Youn, Il-Joong
    • Journal of Mechanical Science and Technology
    • /
    • 제14권8호
    • /
    • pp.807-815
    • /
    • 2000
  • In this paper, modified discrete time preview control algorithms for active and semi-active suspension systems are derived based on a simple mathematical 4 DOF half-car model. The discrete time preview control laws for ride comfort are employed in the simulation. The algorithms for MIMO system contain control strategies reacting against body forces that occur at cornering, accelerating, braking, or under payload, in addition to road disturbances. Matlab simulation results for the discrete time case are compared with those for the continuous time case and the appropriateness of the discrete time algorithms are verified by the of simulation results. Passive, active, and semi-active system responses to a sinusoidal input and an asphalt road input are analysed and evaluated. The simulation results show the extent of performance degradation due to numerical errors related to the length of the sampling time and time delay.

  • PDF

차량 능동 현가장치의 혼합제어기 설계

  • 한기봉;이시복
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1993년도 추계학술대회 논문집
    • /
    • pp.293-298
    • /
    • 1993
  • In ground vehicles, the increasing demand for safety and ride comfort which are trade-off relation, especially at high speeds, has led to the development od actively controlled suspensions. The LQG/LTR controller can be used to design a robust feedback control system that deals with disturbance rejection properties as well as insensitivity to modelling errors and sensor noise. And when the disturbance can not be measured but is limited within a certain frequency range, a bandpass feedback to eliminate the disturbance response can be used. In this paper, hybrid controller cosisted of bandpass feedback controller and LQG/LTR controller is applied to a quarter-car model moving on a randomly profiled road. The random road profile considered as colored noise is shaped from white noise by use of shaping filter. The performance of the hybrid control system is compared with that of an LQG/LTR controlled system.

  • PDF

Investigation of the semi-active electromagnetic damper

  • Montazeri-Gh, Morteza;Kavianipour, Omid
    • Smart Structures and Systems
    • /
    • 제13권3호
    • /
    • pp.419-434
    • /
    • 2014
  • In this paper, the electromagnetic damper (EMD), which is composed of a permanent-magnet rotary DC motor, a ball screw and a nut, is considered to be analyzed as a semi-active damper. The main objective pursued in the paper is to study the two degrees of freedom (DOF) model of the semi-active electromagnetic suspension system (SAEMSS) performance and energy regeneration controlled by on-off and continuous damping control strategies. The nonlinear equations of the SAEMSS must therefore be extracted. The effects of the EMD characteristics on ride comfort, handling performance and road holding for the passive electromagnetic suspension system (PEMSS) are first analyzed and damping control strategies effects on the SAEMSS performance and energy regeneration are investigated next. The results obtained from the simulation show that the SAEMSS provides better performance and more energy regeneration than the PEMSS. Moreover, the results reveal that the on-off hybrid control strategy leads to better performance in comparison with the continuous skyhook control strategy, however, the energy regeneration of the continuous skyhook control strategy is more than that of the on-off hybrid control strategy (except for on-off skyhook control strategy).