• Geophysics and Geophysical Exploration
• /
• v.25 no.1
• /
• pp.14-25
• /
• 2022

The passive surface wave method measures seismic signals from ambient noises or vibrations of natural phenomena without using an artificial source. Since passive sources are usually in lower frequencies than artificial ones being able to ensure the information on deeper geological structures, the passive surface wave method can investigate deeper geological structures. In the passive method, frequency dispersion curves are obtained after data acquisition, and the dispersion curves are analyzed by assuming 1D-layered earth, which is like the method of active surface wave survey. However, when computing dispersion curves, the passive method first obtains and analyzes coherence curves of received signals from a set of receivers based on spatial autocorrelation. In this review, we explain how passive surface wave methods measure signals, and make data processing and interpretation, before analyzing field application cases.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.17-27
• /
• 1996

This study was designed to survey exposure levels of formaldehyde among workplaces in some plywood industries and to compare three sampling methods including the impinger method(IM, NIOSH method No. 3500), the solid sorbent tube method(SS, NIOSH method No. 2541), and the passive bubbler monitor method(PB, SKC). The survey was conducted in seven particle board manufacturing factories, two resin manufacturing factories and two plywood manufacturing factories in Incheon area during the period from March 6 to April 20, 1995. The workplaces included were the hot/cold press, the roller/spreader, the soaking/drying, and the reaction/mixing areas. The results were as follows; 1. The average(GM, GSD) concentrations of formaldehyde by sampling methods were 0.11(4.43) ppm by IM, 0.27(2.03) ppm by SS, and 0.29(2.04) ppm by PB, respectively. The concentrations by 1M method were statistically very significantly lower than those of SS and PB methods, particularly at low air borne concentrations of formaldehyde (p<0.001). 2. The area average concentrations of formaldehyde by workplaces measured with PB bubblers were 0.23(2.08) ppm from the press, 0.23(1.77) ppm from the spreader, 0.24(1.51) ppm from the soaking, and 0.46(1.96) ppm from the reaction areas, respectively. The personal average concentrations of formaldehyde by workplaces measured with PB bubblers were 0.30(1.77) ppm from the press, 0.33(1.54) ppm from the spreader, 0.36(1.46) ppm from the soaking, and 0.84(1.19) ppm from the reaction areas, respectively. 3. No statistically significant differences of formaldehyde concentrations among workplaces except the reaction area(p<0.001) were found. 4. Formaldehyde concentrations from personal samples were higher than those of from area sam pies in all workplaces studied. But no statistically significant differences of formaldehyde concentrations both area and personal samples were found. In conclusion, this study found that although formaldehyde concentrations in some plywood industries in Incheon area were below the regulatory limit of 1 ppm, they were over the limits recommended by NIOSH and ACGIH. This study also suggests that the impinger method may underestimate true formaldehyde concentrations. It implies that there will be more workplaces not meeting current regulatory limit if either the solid sorbent or passive bubbler methods were used instead of the impinger method. It is suggested that passive monitors will be a reasonable alternative for area and personal sampling of formaldehyde if the accuracy and validity of passive monitors be verified before use.

• Korean Journal of Ecology and Environment
• /
• v.52 no.2
• /
• pp.143-150
• /
• 2019

Although inconspicuous marsh birds are an indicator of marsh health, there is little understanding of their status and population trends due to their behavioral characteristics and lack of reliable survey methods in Korea. We applied the Standardized North American Marsh Bird Monitoring Protocols(SNAMBMP) already validated in North America for effective survey of the marsh birds. We selected 29 sites with emergent marshes, rice fields and riparian forests in Seocheon-gun, Buyeo-gun and Gunsan-si. We conducted the survey with a combination of passive 5 minute point-count and vocal survey method (30 seconds call-broadcasting+30 seconds silence) that was targeted eight species 2~7 times/site from March to July 2017. Four species, Brown-cheeked Rail(Rallus indicus), Ruddy-breasted Crake (Porzana fusca), Watercock (Gallicrex cinerea) and Greater Painted-snipe (Rostatula benghalensis), were detected at one site respectively (naïve occupancy rate=0.035). Vocal survey method with conspecific call-broadcasting provided better on Brown-cheeked Rail and Watercock than the others. We suggest a combination of passive point-count and vocal survey method like SNAMBMP to monitor inconspicuous marsh birds at nationwide scale and collection of sound files through recording of the entire process during the survey.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.17-22
• /
• 2006

Shear modulus is directly linked to material's stiffness and is one of the most critical engineering parameters. Seismically, shear-wave velocity (Vs) is its best indicator. Although methods like refraction, down-hole, and cross-hole shear-wave surveys can be used, they are generally known to be tougher than any other seismic methods in field operation, data analysis, and overall cost. On the other hand, surface waves, commonly known as ground roll, are always generated in all seismic surveys with the strongest energy, and their propagation velocities are mainly determined by Vs of the medium. Furthermore, sampling depth of a particular frequency component of surface waves is in direct proportion to its wavelength and this property makes the surface wave velocity frequency dependent, i.e., dispersive. The multichannel analysis of surface waves (MASW) method tries to utilize this dispersion property of surface waves for the purpose of Vs profiling in 1-D (depth) or 2-D (depth and surface location) format. The active MASW method generates surface waves actively by using an impact source like sledgehammer, whereas the passive method utilizes those generated passively by cultural (e.g., traffic) or natural (e.g., thunder and tidal motion) activities. Investigation depth is usually shallower than 30 m with the active method, whereas it can reach a few hundred meters with the passive method. Overall procedures with both methods are briefly described.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.511-516
• /
• 2007

Active method MASW(Multi channel Analysis of Surface Waves), which is one of the surface wave exploration methods, has the difficulties to supply enough shear wave velocity log, caused by short spread length and lack of low frequency energy. To make up this defect, the passive method MASW survey is taked and analysised in Daeku subway construction site, Jungpyung-dong Gyeongsan city. The passive method MASW using the microtremor, improve the quality of the overtone record by applying the azimuth correction caused offline sources. And combing with active overtone record which is acquired by same geometry has the benefits of improve shallow depth resolution and extend possible investigation depth. To take the optimized acquisition parameters, the 2m, 4m, and 6m geophone spacing is tested. And 2m spacing overtone image could make the reliable shear wave velocity log.

• Journal of Environmental Science International
• /
• v.16 no.12
• /
• pp.1325-1335
• /
• 2007

The utility of soil-gas surveys is directly proportional to their accuracy in reflecting and representing changes in the subsurface concentrations of source compounds. Passive soil-gas vapor-phase is merely a fractional trace of the source, so, as a matter of convenience, the units used in reporting detection values from EMFLUX surveys are smaller than those employed for source-compound concentrations. According to the Leaking Underground Storage Tank(LUST) Program Annual Report, approximately 16 U.S. million dollars were spent for environmental site investigations at over 1,600 Underground Storage Tank(UST) sites and approximately over 1,000 acres of land was characterized and remediated in the State of Illinois in the year of 2003 alone. The main purpose of this study is to propose an idea to significantly reduce the site investigation cost by utilizing a passive soil-gas survey and conventional intrusive drilling method and to fully define the three dimensional characteristics of subsurface contamination from two industrial drycleaning facilities.

• Korean Journal of Veterinary Research
• /
• v.12 no.1
• /
• pp.51-58
• /
• 1972

Hemagglutinating antigen of Toxoplasma gondii was prepared and purified by the method of a slight modification of Tsunematsu, and the preparation of the skin test antigen (toxoplasmin) was made by means of acetone-ether treatment described by Nobute et al. With these antigens the passive hemagglutionation and skin tests were performed for the diagnosis of swine toxoplasmosis by using artificially infected pigs. The results obtained were summarized as follows: 1. The hemagglutinating antibody and the skin test antibody were demonstrated one and three weeks after infection, respectively. And these antibodies were maintained over nine weeks after infection. 2. The antigenicity of hemagglutinating antigen was stable when it was kept in frozen state, while was unstable in a liquid state. 3. Freeze-dried skin test antigen (toxoplasmin) was stable for two months or more if it was kept at $5^{\circ}C$ and room temperature, but in the liquid or reconstituted state it was unstable. 4. Freeze-dried skin test antigen could be preserved without loss of antigenicity for more than two months. 5. Passive hemagglutination test could be applied effectively at the early phase of the disease process and skin test at later phase, mainly for epidemiological survey. However, by combiniation of these methods, the more accurate results could be obtained.

• 보존과학연구
• /
• s.35
• /
• pp.25-44
• /
• 2014

In this study, measured annual year and seasonal concentrations of VOCs by Active type and Passive type using the measurement and analysis method in the exhibition hall and outdoor. It was compared with the correlation between the methods according the comparison of methods to measured concentrations. As a results, the annual average concentrations of TVOC in exhibition room($906.5{\mu}g/m^3$) was greater than for most of the study period, more than 1.8 times the standard in the Ministry of Environment. ${\Sigma}VOCs$ concentration of exhibition room by Active type was higher than Passive type. Some VOCs was decreased with the lapse of time a temporary increase tendencies was. The annual average I/O ratio of TVOC was 9.0, ${\Sigma}VOCs$ was confirmed to occur in a large amount inside the exhibition hall ${\Sigma}VOCs$ was studied to 34.0. Correlation coefficient of ${\Sigma}VOCs$ was 0.367. Toluene was 0.567 that the survey was the largest analysis to the relationship between the two methods.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.14-18
• /
• 2004

High levels of ambient noise and safety factors often limit the use of 'active-source' seismic methods for geotechnical investigations in urban environments. As an alternative, shear-wave velocity-depth profiles can be obtained by treating the background microtremor wave field as a stochastic process, rather than adopting the traditional approach of calculating velocity based on ray path geometry from a known source. A recent field test in Melbourne demonstrates the ability of the microtremor method, using only Rayleigh waves, to resolve a velocity inversion resulting from the presence of a hard, 12 m thick basalt flow overlying 25 m of softer alluvial sediments and weathered mudstone. Normally the presence of the weaker underlying sediments would lead to an ambiguous or incorrect interpretation with conventional seismic refraction methods. However, this layer of sediments is resolved by the microtremor method, and its inclusion is required in one-dimensional layered-earth modelling in order to reproduce the Rayleigh-wave coherency spectra computed from observed seismic noise records. Nearby borehole data provided both a guide for interpretation and a confirmation of the usefulness of the passive Rayleigh-wave microtremor method. Sensitivity analyses of resolvable modelling parameters demonstrate that estimates of shear velocities and layer thicknesses are accurate to within approximately $10\%\;to\;20\%$ using the spatial autocorrelation (SPAC) technique. Improved accuracy can be obtained by constraining shear velocities and/or layer thicknesses using independent site knowledge. Although there exists potential for ambiguity due to velocity-thickness equivalence, the microtremor method has significant potential as a site investigation tool in situations where the use of traditional seismic methods is limited.

• Journal of Preventive Medicine and Public Health
• /
• v.31 no.1 s.60
• /
• pp.72-81
• /
• 1998

The purpose of this study was to investigate the relation between health behavior patterns and demographic, socio-economic characteristics, health status, health information in Korea. The quantification method through canonical correlation analysis was conducted to the data from Korea National Health Survey in 1995, which consisted of 5,805 persons. The health lifestyle patterns were quantified as good diet lifestyle, passive lifestyle to the negative direction and drinker lifestyle, smoker lifestyle, hedonic lifestyle and fitness lifestyle to the positive direction. The covariate were related to health lifestyle patterns in the order of sex, age, marital status, occupation, health information, economic status, level of physical labour and health status. Characteristics of male, age below 50, married, blue colored worker, no health information, low in economic status, heavy level of physical labour, and poor in health status were positively related to drinker lifestyle, smoker lifestyle, hedonic lifestyle, fitness lifestyle sequentially.