• Physical Therapy Rehabilitation Science
• /
• v.8 no.1
• /
• pp.45-51
• /
• 2019

Objective: The purpose of this study was to investigate the muscle activity ratio of the lower limb according to changes in straight leg raise (SLR) test angles on hamstring muscle shortening during squat exercises. Design: Randomized controlled trial. Methods: The subjects were 14 healthy adults who were informed of and agreed to the method and purpose of the study. The participants were classified into SLR groups according to two angles (over $80^{\circ}$ or under $80^{\circ}$) assessed using the SLR tests. After training and practicing the wall squat posture to be applied to the experiment, electromyography (EMG) was used to measure changes in muscle activity during the performance of a wall squat. After stretching, a sequence of pre-stretch tests were performed again, and the active and passive SLR tests were also reconducted; thereafter, a wall squat was performed again by attaching EMG electrodes. The EMG results before and after stretching were compared. Results: The muscle activity of the vastus lateralis oblique muscle increased in both groups. The muscle activity of the vastus medialis oblique muscle decreased in over both group. Rectus femorus activity increased in the under 80-degree groups but decreased in the over 80-degree group. The muscle activity of the biceps femoris muscle decreased after stretching in the over 80-degree group and increased in the under 80-degree group, and the semitendinosus muscle activity after stretching was decreased. The quadriceps-to-hamstring muscle (Q:H) ratio before and after stretching between groups showed that the hamstring muscle ratio decreased after stretching in both groups. Conclusions: The results of this study showed that the Q:H ratio before and after stretching between groups was not significantly different.

• Animal Bioscience
• /
• v.34 no.1
• /
• pp.74-84
• /
• 2021

Objective: Feed additives that modify rumen fermentation can be used to prevent metabolic disturbances such as acidosis and optimize beef cattle production. The study evaluated the effects of liquid and powdered forms of polyclonal antibody preparation (PAP) against Streptococcus bovis and Fusobacterium necrophorum on rumen fermentation parameters in ruminally cannulated non-lactating dairy cows that were adapted or unadapted to a high concentrate diet. Methods: A double 3×3 Latin square design was used with three PAP treatments (control, powdered, and liquid PAP) and two adaptation protocols (adapted, unadapted; applied to the square). Adapted animals were transitioned for 2 weeks from an all-forage to an 80% concentrate diet, while unadapted animals were switched abruptly. Results: Interactions between sampling time and adaptation were observed; 12 h after feeding, the adapted group had lower ruminal pH and greater total short chain fatty acid concentrations than the unadapted group, while the opposite was observed after 24 h. Acetate:propionate ratio, molar proportion of butyrate and ammonia nitrogen concentration were generally greater in adapted than unadapted cattle up to 36 h after feeding. Adaptation promoted 3.5 times the number of Entodinium protozoa but copy numbers of Streptococcus bovis and Fibrobacter succinogens genes in rumen fluid were not affected. However, neither liquid nor powdered forms of PAP altered rumen acidosis variables in adapted or unadapted animals. Conclusion: Adaptation of cattle to highly fermentable carbohydrate diets promoted a more stable ruminal environment, but PAP was not effective in this study in which no animal experienced acute or sub-acute rumen acidosis.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.81-90
• /
• 2009

It is inevitable for college students to be confused when they first face university education, which requires them to be self-reliant and responsible, after finishing their course of education, which is passive under control of period and environment, in primary, middle, and high schools. Introduction to college courses, which require students to be subjective and responsible, to be taken after chronically and environmentally controlled primary and secondary education, are but confusing. In this stage, college education should provide ground for educational system so that students can escape from repetitively enforced way of studying of fixed curriculums and study creatively and subjectively while befitting each individual's aptitude. For instance, in programming classes in engineering school, students scholastic achievements are closely interrelated with the professor's educational principles. A change in method of education, from one previously focused on theoretical contents to one centered on practices and experiments, can reap good results. Also, as the need arose for introduction of practice-focused evaluation system, from recognition-centered professor evaluating system to enablement of actively developing creative and self-reliant way of learning, we applied the Rublic System. It is a feedback system that all or most students become the evaluators, of which the indicators of evaluation such as category, standard, and score are public. We have looked into whether or not there has been an improvement in GPAs of students, and if there exists an improvement then what efforts should be made to solidify the system.

• The Korean Journal of Franchise Management
• /
• v.8 no.4
• /
• pp.43-54
• /
• 2017

Purpose - Recently, the meaning and importance of entrepreneurship has been emphasized in order to achieve innovation-led economic growth through entrepreneurship. Various forms of entrepreneurship education have been established centering on universities, and the scale of the entrepreneurship support programs of the government and the private sector has been increasing. Entrepreneurial education can enhance entrepreneurship and promote entrepreneurial intention. The purpose of this study is to examine the effect of experience of entrepreneuship education and social awareness of entrepreneurship on entrepreneurial intention through entrepreneurship, focusing on women who were relatively alienated from entrepreneurial activities. This study will provide suggestions for women's entrepreneurship in the future. Research design, data, and methodology - Recently, the meaning and importance of entrepreneurship has been emphasized in order to achieve innovation-led economic growth through entrepreneurship. Various forms of entrepreneurship education have been established centering on universities, and the scale of the entrepreneurship support programs of the government and the private sector has been increasing. Entrepreneurial education can enhance entrepreneurship and promote entrepreneurial intention. The purpose of this study is to examine the effect of experience of entrepreneuship education and social awareness of entrepreneurship on entrepreneurial intention through entrepreneurship, focusing on women who were relatively alienated from entrepreneurial activities. This study will provide suggestions for women's entrepreneurship in the future. Result - Recently, the meaning and importance of entrepreneurship has been emphasized in order to achieve innovation-led economic growth through entrepreneurship. Various forms of entrepreneurship education have been established centering on universities, and the scale of the entrepreneurship support programs of the government and the private sector has been increasing. Entrepreneurial education can enhance entrepreneurship and promote entrepreneurial intention. The purpose of this study is to examine the effect of experience of entrepreneuship education and social awareness of entrepreneurship on entrepreneurial intention through entrepreneurship, focusing on women who were relatively alienated from entrepreneurial activities. This study will provide suggestions for women's entrepreneurship in the future. Conclusions - Although women's economic activity is increasing, women's activities in the field of business start-up are still passive. The purpose of this study is to examine the effect of entrepreneurship on entrepreneuship education and the social perception of entrepreneurship. As a result, we found that social awareness, entrepreneurship education, and entrepreneurship all had a significant influence on the intention of entrepreneurship. Positive social atmosphere for entrepreneurship induces interest in entrepreneurship education and forms a virtuous cycle structure that fosters entrepreneurship through entrepreneuship education. In addition, the introduction of diverse programs that encourage entrepreneurship should enhance the attractiveness of promising talent to enter the entrepreneurial market.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.413-420
• /
• 2024

After Friedrich Nietzsche's advocacy of nihilism, many literary works, dramas, and films have depicted aspects of human psychology associated with nihilism. Animation, too, has been used to convey nihilism, with narratives infused with nihilistic themes produced as both TV series and theatrical animations. Particularly, animation, as a visual medium capable of realizing any imaginative image unlike other media, possesses distinctive characteristics from live-action cinematography and differs from comics in its temporal properties. Hence, this study aims to analyze how Nietzsche's defined three stages of nihilism are represented within animation characters and how they construct various scenarios, using the anime "Attack on Titan" as a case study. The research unfolds by first examining Nietzsche's types of nihilism and the three stages through a review of literature, while also investigating the portrayal of nihilism in mass media and considering the unique attributes of animation. Secondly, building upon the literature review, the analysis interprets the narrative and constructed world of the chosen case study from a nihilistic perspective, examining four major characters through the stages of passive nihilism, active nihilism, and eternal recurrence. The findings demonstrate that the anime conveys two messages regarding negation and affirmation of one's life and existence, thereby offering viewers an opportunity to deeply contemplate human existence. This study is considered significant as it examines how Nietzschean nihilism is portrayed within the popular entertainment medium of animation.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.39-48
• /
• 2005

In the age of digital culture, TV broadcasting is exercising more influence as a information and communication medium compared to past. With the appearance of satellite broadcasting service in 2002, the broadcasting environment became a diversified field of local TV, cable TV, satellite, internet, etc. and created the time of multi-media and multi-channel. This ongoing change of broadcasting environment made the passive audience of the past, active image makers and new accepters, participants and users of communications, who know how to choose and use media as the active centerpiece, The active acceptor as the centerpiece of channel selections has become the center of the broadcasting, whereby they pick up and enjoy their favorite TV programs and came to remember the list of their favorite channels and zap them finally. In this point of spotting their favorite channels and improving the degree of recognition for the channels, the development of the noticeable brand for a particular program has made a great contribution. The aim of this study, therefore, is to recognize the factors, which are important in the habits of watching TV and to develop professional brands for TV broadcasting programs. The range of the survey for this study was home news programs and broadcasting stations abroad, which were on air from March to May in 2004. The focus of the survey was universal and professional news programs. Through this study, it was ascertained that, in the case of news, developing a brand for an anchor as well as for a professional brand of TV program could be an important element.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.552-558
• /
• 2014

This paper suggests how to design a ZigBee-chip-based communication module to remotely measure radiation level. The suggested communication module consists of two control processors for the chip as generally required to configure a ZigBee system, and one chip module to configure a ZigBee RF device. The ZigBee-chip-based communication module for remote radiation measurement consists of a wireless communication controller; sensor and high-voltage generator; charger and power supply circuit; wired communication part; and RF circuit and antenna. The wireless communication controller is to control wireless communication for ZigBee and to measure radiation level remotely. The sensor and high-voltage generator generates 500 V in two consecutive series to amplify and filter pulses of radiation detected by G-M Tube. The charger and power supply circuit part is to charge lithium-ion battery and supply power to one-chip processors. The wired communication part serves as a RS-485/422 interface to enable USB interface and wired remote communication for interfacing with PC and debugging. RF circuit and antenna applies an RLC passive component for chip antenna to configure BALUN and antenna impedance matching circuit, allowing wireless communication. After configuring the ZigBee-chip-based communication module, tests were conducted to measure radiation level remotely: data were successfully transmitted in 10-meter and 100-meter distances, measuring radiation level in a remote condition. The communication module allows an environment where radiation level can be remotely measured in an economically beneficial way as it not only consumes less electricity but also costs less. By securing linearity of a radiation measuring device and by minimizing the device itself, it is possible to set up an environment where radiation can be measured in a reliable manner, and radiation level is monitored real-time.

• Economic and Environmental Geology
• /
• v.29 no.1
• /
• pp.65-75
• /
• 1996

Sulfate reduction and the precipitation of metal sulfides may have great potential to improve water quality of mine effluents in wetland treatment systems. Laboratory experiments using sulfate reducing bacteria (SRB) and limestone to treat effluents from the abandoned Dalsung tungsten-copper mine show that encouraging results, that have been attributed to sulfate reduction. Fe, Al, Cd, Cu and Zn are reduced to below detection limits with $99{\sim}100%$ metal removal rates, Mn is reduced by at least 90% to below 8.0 mg/l, and the pH is raised from 5.12 to 7.60 after 53 days of experiments. In the staged design, laboratory experiments are initiated to determine what would be reasonable substrate materials for remediation of the mine effluents. A substrate mixture containing 70% oak compost and 30% mushroom compost maintains $0.03{\sim}0.04mM$ of lactate, which provides good condition for the SRB granule. A downflow SRB wetland system is proposed as follows : 1) The lower part of the treatment system consists with a 25 cm thick layer of high quality (above 95% of $CaCO_3$) of limestone; 2) The geotextile (geonet) is recommended to be spread on the limestone bed to prevent clogging the limestones with the substrates; 3) The mixture of substrates with 70% oak and 30% spent mushroom composts, and SRB granules overlain on top of the geonet with 25 cm height. The sizes of the passive treatment systems are calculated according to metal loading and permeability criteria : 1) $220m^3$ ($15{\times}15{\times}1m$) for -1 level effluents; 2) $28m^3$ ($5.3{\times}5.3{\times}1m$) for -2 level; and 3) $2700m^3$ ($52{\times}52{\times}1m$) for the -3 level. The -3 level system needs to be broken down into 5 to 15 cells.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Economic and Environmental Geology
• /
• v.44 no.1
• /
• pp.83-94
• /
• 2011

Extra heavy oil reservoirs are distributed over the world but most of them is deposited in the northern part of the Orinoco River in Venezuela, in the area of 5,500 $km^2$, This region, which has been commonly called "the Orinoco Oil Belt", contains estimated 1.3 trillion barrels of original oil-in-place and 250 billion barrels of established reserves. The Venezuela extra heavy oil has an API gravity of less than 10 degree and in situ viscosity of 5,000 cP at reservoir condition. Although the presence of extra heavy oil in the Orinoco Oil Belt has been initially reported in the 1930's, the commercial development using in situ cold production started in the 1990's. The Orinoco heavy oil deposits are clustered into 4 development areas, Boyaco, Junin, Ayachoco, and Carabobo respectively, and they are subdivided into totally 31 production blocks. Nowadays, PDVSA (Petr$\'{o}$leos de Venzuela, S.A.) makes a development of each production block with the international oil companies from more than 20 countries forming a international joint-venture company. The Eastern Venezuela Basin, the Orinoco Oil Belt is included in, is one of the major oil-bearing sedimentary basins in Venezuela and is first formed as a passive margin basin by the Jurassic tectonic plate motion. The major source rock of heavy oil is the late Cretaceous calcareous shale in the central Eastern Venezuela Basin. Hydrocarbon materials migrated an average of 150 km up dip to the southern margin of the basin. During the migration, lighter fractions in the hydrocarbon were removed by biodegradation and the oil changed into heavy and/or extra heavy oil. Miocene Oficina Formation, the main extra heavy oil reservoir, is the unconsolidated sand and shale alternation formed in fluvial-estuarine environment and also has irregularly a large number of the Cenozoic faults induced by basin subsidence and tectonics. Because Oficina Formation has not only complex lithology distribution but also irregular geology structure, geological evolution and characteristics of the reservoirs have to be determined for economical production well design and effective oil recovery. This study introduces geological formation and evolution of the Venezuela extra heavy oil reservoirs and suggest their significant geological characteristics which are (1) thickness and geometry of reservoir pay sands, (2) continuity and thickness of mud beds, (3) geometry of faults, (4) depth and geothermal character of reservoir, (5) in-situ stress field of reservoir, and (6) chemical composition of extra heavy oil. Newly developed exploration techniques, such as 3-D seismic survey and LWD (logging while drilling), can be expected as powerful methods to recognize the geological reservoir characteristics in the Orinoco Oil Belt.