• International journal of advanced smart convergence
• /
• v.11 no.4
• /
• pp.266-272
• /
• 2022

Structural stress analysis is performed to confirm the safety of the structures before the construction, and stress analysis is performed to evaluate the safety of various components before the ship or vehicle corresponding to the moving structure is manufactured. In this case, the stress analysis work is performed using the stress analysis software of each company. The results of the stress analysis based on the boundary conditions of the applied loads are analyzed to evaluate the safety of the structure, but the results are difficult to verify because most of the stress analysis software possessed by each company is one. In this paper, we were performed the stress analysis of the bracket applied to the bare chassis of the 30-passenger bus under development is performed by HYPERMESH. In order to verify this, the stress analysis is performed using ANSA/META under the same boundary condition. The stress analysis results of ANSA/META and HYPERMESH showed that they had the same stress distribution and the maximum stress occurred at the same location. Taken together, the results of stress analysis using HYPERMESH were reliable.

• Journal of Navigation and Port Research
• /
• v.30 no.1 s.107
• /
• pp.9-15
• /
• 2006

At the adjacent sea area of Busan Central Wharf, a variety of vessels, such as middle-large passenger ships, small hugh speed crafts, container ships, cargo ships and working boats as well as small miscellaneous vessels are freely sailing comparatively without special rules and marine traffic control. In this research, we analyzed traffic stream and navigational characteristics cf main traffic route based on statistics and distribution of tracks by ship's type and tonnage cf the passing vessels after conducting marine traffic survey twice using exclusive software. We examined the traffic safety of the passing vessels by classifying the sea area by each function based on the analysis about this traffic situation, and analyzing the effect by designating 'Inner passage'. We also studied the plan for the effective rearrangement cf Central Wharf considering basically the traffic safety of arrival and departure in a point of view of navigators.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.1
• /
• pp.46-55
• /
• 2009

To compare and evaluate the suitability and comfort levels of the environment on board a stern trawl training ship, KAYA(GT: 1737 tons, Pukyong National University), with the international standardization guide ISO 6954:2000(E), measurements of the hull vibration on accommodation areas and working areas of the training ship from July 8 to July 10, 2008 were completed upon KAYA's linear sea route. The vibrations along the z-axis were measured with the use of a 3-axis vibration level meter, which included a marine vibration card. Results show accelerations of the vibrations on the passenger's accommodation area to be 42.0-115.8(average: 78.0, standard deviation(SD): 21.0) mm/$s^2$, which is largely below the permissible upper limit, but 75 % of the observation points exceeded the permissible lower limit of 71.5 mm/$s^2$, indicating a comfortable environment. The accelerations of the vibration in a frequency of 10-24Hz lowering the visual performance were measured at 2.5-12.0(average: 7.6, SD: 3.1) mm/$s^2$. The crew s accommodation area experienced vibration accelerations of 42.9-82.3(average: 93.1, SD: 53.1) mm/$s^2$, which is generally below the permissible upper limit of 214.0 mm/$s^2$, and 62.5% of the observation points did not exceed the permissible lower limit of 107.0 mm/$s^2$, denoting a level of comfort. The acceleration of the vibration in a frequency of 10-24Hz were 4.7-28.3(average: 12.4, SD: 8.8) mm/$s^2$. On the crew s working area the accelerations were measured at 86.9-153.9(average 119.3, SD 18.0) mm/$s^2$. These values were generally below the permissible upper limit of 286.0 mm/$s^2$ and only 12.5% of the observation points did not exceed the permissible lower limit of 143.0 mm/$s^2$, the level at which a high level of comfort is maintained. The accelerations in frequency of 10-24Hz and 30Hz were 9.1-29.8 (average 13.8, SD= 4.5) mm/$s^2$ and 8.9-13.7 (average 11.8, SD 2.1) mm/$s^2$, respectively. In conclusion the boarding environment of the training ship was good in general although an improvement of the vibration condition partially needed on the crew s accommodation area near the engine room.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.359-364
• /
• 2017

This study examined business acts related to leisure boats, so as to investigate the differences of regulations and things to be supplemented, as well as to suggest improvement measures. In order to achieve this purpose, the authors analyzed the respective legislations. The Acts on businesses using leisure boats(or power-driven water leisure crafts) are the Marine Transportation Act, Excursion Ship and Ferry Business Act, Water-Related Leisure Activities Safety Act, and Act on the Development, Management, etc. of Marinas. These Acts have differences in regulations, in terms of gross tonnage, the age of vessels, crewman, and the liquor traffic. These differences can cause problems such as adjusting the gross tonnage of the vessel by modifying the structures of the facilities, assigning old vessels, sailing without crewmen required for safety, and going against fairness in the liquor traffic in similar businesses. Such differences appeared to be caused by the lack of understanding of leisure boats and the series of new legislation which have been added one by one. It is required to raise the understanding on the characteristics of leisure boats and reflect them in the legislation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.103-109
• /
• 2005

At the adjacent sea area of Busan Central Wharf, a variety of vessels, such as middle-large passenger ships, small fast sailing ships, container ships, cargo ships and working ships as well as small miscellaneous vessels are freely sailing comparatively without special steering and sailing Rules and marine traffic control because exclusive wharfs in accord with their purpose and use have been arranged in each wharf. In this research, we analyzed traffic stream and navigational characteristics of main traffic route based on statistics and distribution of tracks by ship's type and tonnage of the passing vessels after conducting marine traffic survey twice using exclusive software by targeting the sea area during the period of time. We examined the traffic safety of the passing vessels by classifying the sea area by each function based on the analysis about this traffic situation, and analyzing the effect by designating 'Buknea passage'. We also studied the plan for the effective rearrangement of Central Wharf considering basically the traffic safety oif arrival and departure in a point if view of navigators.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.1
• /
• pp.34-46
• /
• 2019

This paper provides the numerical results for the self-propulsion performance in waves of a car ferry vessel with damage in one of its twin-screw propulsion systems without flooding the engine room. The numerical simulations were carried out according to the Safe Return to Port (SRtP) regulation made by the Lloyd's register, where the regulation requires that damaged passenger ships should have an ability to return to port with a speed of 6 knots in a Beaufort 8 sea condition. For the validation of the present numerical analysis study, the resistance performance and the self-propulsion performance of the car ferry in intact and damaged conditions in calm water were calculated, which showed a satisfactory agreement with the model test results of Korea Research Institute of Ship and Ocean engineering (KRISO). Finally, the numerical simulation of self-propulsion performance in waves of the damaged car ferry ship was carried out for a normal sea state and for a Beaufort 8 sea state, respectively. The estimated average Brake Horse Power (BHP) for keeping the damaged car ferry ship advancing at a speed of 6 knots in a Beaufort 8 sea state reached about 47% of BHP at MCR condition or about 56% of BHP at NCR condition of the engine determined at the design state. In conclusion, it can be noted that the engine power of the damaged car ferry ship in single propulsion condition is sufficient to satisfy the SRtP requirement.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.1
• /
• pp.44-53
• /
• 2006

This study purposed to investigate air pollution in car shipping yards and, for this purpose, we selected an outdoor open-air yard and an indoor ramp into the ship and measured the concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10, PM2.5 and heavy metals in the air. The results of this study are as follows. No significant difference was observed in temperature and humidity between the outdoor and indoor workshop, and the average air flow was 0.52 m/s in the indoor workshop, which is higher than 0.19 m/s in the outdoor workshop(p<0.01). The average concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10 and PM2.5 according to workplace were 0.03 ppm(${\pm}0.01$), 0.03 ppm(${\pm}0.01$), 0.46 ppm(${\pm}0.22$), $39.44{\mu}g/m^3$(${\pm}2.45$) and $5.45{\mu}g/m^3$(${\pm}1.15$) respectively in the outdoor workshop, and 0.15 ppm(${\pm}0.05$), 0.22 ppm(${\pm}0.06$), 8.85 ppm(${\pm}3.35$), $236.39{\mu}g/m^3$(${\pm}58.21$) and $152.43{\mu}g/m^3$(${\pm}35.42$) respectively in the indoor workshop. Thus, the concentrations of gaseous substances in the indoor workshop were 4.9-19.2 times higher than those in the outdoor workshop, and the concentrations of fine dusts were 5.9-27.9 times higher(p<0.01). In addition, according to the result of investigating pollutant concentrations according to displacement and the number of car loaded when shipping gasoline cars into the ship, no significant relation between the number of cars loaded and pollutants was observed in shipping passenger cars, but the concentrations of nitrogen dioxide and carbon monoxide got somewhat higher with the increase of the number of cars loaded(p<0.05). In addition, the concentrations of nitrogen dioxide, carbon monoxide, PM10 and PM2.5 in the air were significantly higher when shipping recreational vehicles, the displacement of which is larger than passenger cars, than when shipping passenger cars(p<0.01). On the other hand, the average heavy metal concentrations of the air in indoor workshop were: lead $-0.05{\mu}g/m^3$(${\pm}0.10$); chromium $-0.90{\mu}g/m^3$(${\pm}0.18$); zinc $-0.38{\mu}g/m^3$(${\pm}0.24$); copper $-0.18{\mu}g/m^3$(${\pm}0.22$); and manganese and cadmium not detected. In addition, the complaining rates of 'asthma,' a major symptom of chronic respiratory diseases, were 18.5% and 22.5% respectively in indoor workers and outdoor workers. Thus the rate was somewhat higher in indoor workers but the difference was not statistically significant. The complaining rates of 'chronic cough' and 'chronic phlegm' were very low and little different between indoor and outdoor workers. The results of this study show that the reason for the higher air pollution in indoor than in outdoor workshop is incomplete combustion of fuel due to sudden start and over-speed when cars are driven inside the ship. In order to prevent high air pollution, efficient management measures should be taken including the observance of the optimal speed, the improvement of old ships and the installation of efficient ventilation system.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.217-222
• /
• 2015

In this research, sea routes of domestic coaster liners between 2005 and 2013 were studied via social network analysis. Study of the sea routes revealed that they follow power-law in a scale-free form, a characteristic found often in social network. We have looked into centrality, which is a major standard in the field of social network analysis. We have also analyzed the annual changing trend in the centrality of the connectivity, examined the effect of quantity through the comparison with the original quantitative analysis method, and lastly, verified the relationship between the centrality of connectivity and mediation. Then, we were able to identify ports according to priority using these factors. This research assumed and interpreted the coaster liners route as a single network and suggested useful results. Based on these results, directing of development of domestic coaster liners route development and other factors will be achieved more smoothly. And if we utilize social network analysis method in other various fields - for example, the centrality of airport and the diplomatic realations analysis of the neighboring country - we will be able to effectively analyze events in diverse perspectives.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.29-35
• /
• 2015

As the numbers of users of domestic passenger ships increased up to 14.5 millions at 2012, the numbers of ships accidents also increased as 2 times than ever. It will be very important to develop technologies related with safety design for onboard passengers and disclose the potential problems. This study performed consciousness survey on ordinary peoples' way finding who have not got any regular anti-disaster training, to develop evacuation models for evacuation feasibility studies. Followings are the results answered by 83 participants for 33 way finding questions. Respondents selected right ways more than 6~18% for 2 ways like T type, U type, Y type passages. But when there are some walkers and/or runners, respondents preferred to select the way where walkers or runners are. And more over the ratio of the ways that runners are on is comparatively higher than walkers. On 'ㅏ'type, 'ㅓ'type and 3 way type passages, even though the walkers and/or runners are affected to answerers, straight way were most preferred. And it is clear that peoples like bright passages. On the other hands, peoples responded as they like right, downward and near stairs more than left, upward and far stairs, respectively. and very few selected escalator and elevator for as evacuation stairs.

• Journal of Environmental Policy
• /
• v.8 no.1
• /
• pp.97-127
• /
• 2009

In Germany, North Sea and East Sea possess significant meaning in many aspects. North coast has an important economical significance to North Sea Gulf States. There are a number of harbors and manufacturing facilities in this area. Agriculture is also developed. East sea, where sea water and river water mingle. has a problem that it can not control harmful substances as fast as the North Sea due to its geographical location of being connected with the North Sea as a narrow water. To protect from big and small ship accidents and pollution sources, East Sea and North Sea have enacted HELKOM Convention and OSPAR Convention, respectively. Moreover, Denmark and Germany have made cooperation on tugboats in the occurrence of shipment accidents through the LethGer-Plan and DenGer-Plan. In 1998, after the Pallas accident that occurred near Bremen, the need to improve cooperation among each states on usable resources for ocean security has been increased in Germany. Consequently, the federal government and gulf state governments associated and organized the so called, "Havarie-Kommanando Ship Accident Measure Unit". Haravarie-Kommanando is a federal-state associated organization that deals with affairs that controls national operation and mobilization of ship accident related organizations unitively when serious ship accidents occur. Moreover, federal and state participant organizations, each shipping agencies and Wiking-Helicopers-Services, a helicopter agency, are cooperating well. Also, mutual assistance with the most prominent passenger agency called Scandlines, ARGE Kuestenschutz(Germany-Denmark shipping agency) is making progress as well.