• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.429-430
• /
• 2002

In this study, three kinds of brake: discs including two coated brake discs and one steel disc were tested under the same experimental conditions on a reduced scale braking test bench. Plasma spray coating technique was used to coat ceramic powder on the discs. In the test, four commercial sintered brake pads were coupled with discs. Ceramic coated discs have shown good stability in friction coefficient at high speed and high energy braking conditions. However, ceramic coated discs caused more wear loss of pad mass than the steel disc. It was shown that thermal barrier effect in ceramic coated discs adjusted the thermal partition between pad and disc. Steel disc showed fluctuating friction coefficient at high speed but less wear loss of pad mass than ceramic coated discs.

• 대한핵의학회지
• /
• 제32권1호
• /
• pp.32-49
• /
• 1998

O-15 표지 물 동적 PET을 이용하여 비균일 심근조직의 혈류를 정확히 추정하기 위하여 일차구획 모델을 변형한 두 개의 혈류 모델을 고안하였다. 첫 모델에서는 혈류, PTI, 조직회수 분획($F_{MM}$)을 추정하였고, 두 번째 모델에서는 혈류, PTI, 그리고 분배계수를 추정하였다. 비균일 심근조직의 비균일성을 나타낼 지표를 도입하여 여러 종류의 비균일 조직을 모사하고 이 지표로 비균일성을 표현하였다. 우리 모델을 적용하여 PTI가 혈류분포의 비균일성과 상관이 적음을 확인하고 분배계수를 변수로 취급한 두 번째 모델에서 추정한 분배계수가 비균일성을 나타냄을 알았다. 분배계수는 비균일성에 따라 굽은 선형(curvilinear)으로 감소하였다. 분배계수와 함께 추정된 혈류도 비균일성이 커지면 참값보다 작게 추정되었다. 추정된 분배계수로 혈류 추정값의 과소평가플 보정하여 추정값의 바이어스를 바로잡을 수 있었다. O-15 표지 물 동적 PET으로 심근혈류를 측정할 때 분배계수를 변수로서 혈류와 함께 추정하여 비균일성을 나타내는 지표로 쓰고 동시에 혈류 추정값을 참값에 가까운 값을 얻는데 쓸 수 있다고 본다. 혈류분포의 비균일성 정도를 수치적으로 표시할 수 있는 지표를 임상에 적용하면 허혈성 심근 질환의 혈류 비균일성을 해석할 수 있을 것으로 생각한다.

• 동력기계공학회지
• /
• 제21권6호
• /
• pp.40-45
• /
• 2017

The objective of this study is the finite element-transfer stiffness coefficient method, which is the combination of the modeling technique of finite element method and the transfer technique of transfer stiffness coefficient method, is applied in the static analyses of two dimensional curved beam structures. To confirm the effectiveness of the applied method, two computational models are selected and analyzed by using finite element method, finite element-transfer stiffness coefficient method and exact solution. The computational results of the static analyses for two computational models using finite element-transfer stiffness coefficient method are equal to those using finite element method. When the element partition number of curved beam structure is increased, the computational results of the static analyses using both methods approach the exact solution. We confirmed that the finite element-transfer stiffness coefficient method is superior to finite element method when the number of the curved beam elements is increased from the viewpoints of the computational speed and the utility of computer memory.

• Journal of Korean Society for Atmospheric Environment
• /
• 제19권E1호
• /
• pp.1-9
• /
• 2003

The soil concentrations of polychlorinated biphenyls (PCBs) were measured at 12 sites in Ansung, Kyonggi province, Korea. Correlation coefficient (r) between total PCBs and organic matter content (OM) was significant (r=0.562, p< 0.05). It suggests that organic matter may be a key factor of soil absorption of PCBs. The PCB concentrations of low chlorinated congeners with high vapor pressure were relatively abundant in air but high chlorinated congeners with low vapor pressure were mainly dominated by soil. The results indicated the influence of physicochemical properties of PCBs such as vapor pressure, octanol - air partition coefficient ( $K_{OA}$ ). The calculated soil/air fugacity quotients suggested that the soil may be a source of heavier molecular PCBs (>penta-CBs) to the atmosphere, where lighter molecular PCBs appear to be affected by a movement from air to soil, especially tetra-CBs. Therefore, PCB homologs with low vapor pressure might have been influenced by revolatilization from soil.

• Journal of Pharmaceutical Investigation
• /
• 제27권2호
• /
• pp.119-123
• /
• 1997

The physicochemical and structural properties of new capsaicin derivative, DA-5018, were examined. The reference standard of this compound was obtained by the recrystallization. A method for the determination of the dissociation constant of the compound is described. pH-solubility and distribution coefficient were determined by chromatographic method. Fundamental properties on thermal behaviors were investigated by TG, DTA and DSC. Structural analysis based on spectroscopic method coincided with the chemical structure of DA-5018. Approximate dissociation constant of the compound determined by UV spectral method was 9.35. Solubilities and partition coefficients in various pH buffer solution appeared pH-dependency. No crystal transition or further transition was found in the thermal analysis. This compound showed good stability, but pH 13 buffer and acetone made some degradative products.

• 약학회지
• /
• 제34권2호
• /
• pp.126-132
• /
• 1990

To enhance the activity of ibuprofen, amides of ibuprofen, 1-piperazinyl-2-(4-isobutylphenyl)propionamide(Ibu-P.A.) and 1-(4-methylpiperazinyl)-2-(4-isobutylphenyl)propionamide (Ibu-M.P.), were synthesized and the pharmaceutical properties and the pharmacological activities of the amides were studied. The lipid:water partition coefficients and pKa values were examined in vitro, and the antiinflammatory effect, analgesic effects, acute toxicity, and intestinal absorption were studied for the amides and compared with ibuprofen in vivo. The results are summarized as belows; 1) The lipid:water partition coefficients of Ibu-M.P. were higher than those of ibuprofen. 2) The calculated pKa values of ibuprofen and Ibu-M.P. were 5.49 and 8.66, respectively. 3) The antiinflammatory effects of ibuprofen, Ibu-P.A., and Ibu-M.P. were same intensity, but the duration of the effects of Ibu-P.A. and Ibu-M.P. were longer than that of ibuprofen. 4) The analgesic effect of Ibu-M.P. was more potent than those of ibuprofen and Ibu-P.A. in the acetic acid-induced writhing test. 5) The $LD_{50}$ was 495 mg/kg for ibuprofen, 187 mg/kg for Ibu-M.P., and over 1250 mg/kg for Ibu-P.A.. 6) The absorption rate constants(k) and half-life($t_{1/2}$) were 0.74($hr^{-1}$) and 0.94(hr) for ibuprofen, and 0.72 ($hr^{-1}$) and 0.96 (hr) respectively for Ibu-M.P..

• Journal of Pharmaceutical Investigation
• /
• 제33권1호
• /
• pp.21-28
• /
• 2003

Ketorolac tromethamine(KT) is a nonsteroidal agent with potent analgesic and moderate anti-inflammatory activity. The lipid-water partition coefficient of KT was evaluated and KT gel was formulated as a gel containing different pH, different concentrations of polymer (poloxamer 407, carbopol 941), propylene glycol, ethanol and various enhancers. The resulting KT gels were evaluated with respect to their viscosity, in vitro drug permeation rate through hairless mouse skin and stability. In n-octanol and chloroform, the lipid-water partition coefficient of KT was the highest at pH 4 phosphate buffer. The apparent viscosity of KT gel increased with an increase in gel pH, polymer and enhancer concentration. But the apparent viscosity of KT gel decreased with an increase in ethanol concentration. The permeation rate of KT through hairless mouse skin from gels different pH was maximum at pH 4 which is close to KT $pK_{a}$ 3.54. The permeation rate decreased with an increase in polymer, propylene glycol concentration. But the permeation rate increased with an increase in ethanol. The increase of drug concentration from 1 to 3% induced linear increase in permeation rate. The best enhancer was the combination of $Labrasol^{\circledR},\;Transcutol^{\circledR}$, oleic acid and l-menthol. In the accelerated stability test(25, 40 and $50{\circ}C$), pH 5 gel was most stable and pH 4 gel was most unstable for 90 days.

• Environmental Analysis Health and Toxicology
• /
• 제16권4호
• /
• pp.223-226
• /
• 2001

Acetanilide is a High Production Volume Chemical, which is produced about 2,300 tons/year in Korea as of 1998 survey. Most is used as an intermediate for synthesis of pharmaceuticals and dyes. The chemical is one of seven chemicals, which are under the frame of OECD SIDS program sponsored by National Institute of Environmental Research of Korea. Regarding the information on the environmental fate. bioconcentration is one of important factor to estimate the environmental tranfer. However, measurement of bioconcentration needs high expense and time. For this reason, OECD recommends to use BCFWIN model to estimate bioconcentration of organic chemicals, BCFWIN estimates the bioconcentration factor (BCF) of an organic compound using the log octanol-water partition coefficient (Kow) of the compound. Structures are entered into BCFWIN through SMITES (Simplified Molecular Input Line Entry System) notations. The BCFWIN method classifies a compound as either ionic or non-ionic. ionic compounds include carboxylic acids, sulfonic acids and salts of sulfonic acids, and charged nitrogen compounds (nitrogen with a + 5 valence such as quaternary ammonium compounds). All other compounds are classified as non-ionic. In this study, bioaccumulation of acetanilide was estimated using BCFWIN model based on SMIIES notation, chemical name data and partition coefficient as one of environmental fate/distribution of the chemical elements.

• Journal of Pharmaceutical Investigation
• /
• 제29권4호
• /
• pp.329-335
• /
• 1999

Clenbuterol, a selective ${\beta}_2-adrenergic$ receptor stimulant, has been introduced as a potent bronchodilator for patients with bronchial asthma, chronic bronchitis and pulmonary emphysema. For the purpose of developing a transdermal preparation for clenbuterol, we attempted to select an optimal solvent system and permeation enhancer among fatty acids and fatty alcohols which are known to accelerate the penetration of various drugs in permeation experiments using hairless mouse skin and Franz diffusion cell. Apparent partition coefficient of clenbuterol was increased as pH of buffer solution was increased and solubility of clenbuterol was increased as the percent of propylene glycol(PG) in buffer solution(pH 10) was increased. Permeability of clenbuterol from different buffer(pH 10)/PG solvent mixtures was decreased as the percent of PG in pH 10 buffer solution was increased and among the various enhancers studied, lauryl alcohol was found to be the most effective enhancer, increasing the permeability of clenbuterol approximately 76-fold compared with control. Lauryl alcohol$(0{\sim}2%)$ enhanced the permeability of clenbuterol concentration-dependently. In this study, the optimal solvent system for the penetration of clenbuterol was found to be 50/50 buffer(pH 10)/PG solvent mixture containing 2% lauryl alcohol.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권6호
• /
• pp.47-57
• /
• 2022

A number of different methods have been used for modeling the sorption of volatile organic chlorinated compounds such as tetrachloroethylene/perchloroethylene (PCE). In this study, PCE was adsorbed in several natural sorbents, i.e., Pahokee peat, vermicompost, BionSoil^®, and natural soil, in the batch experiments. Several sorption models such as linear, Freundlich, solubility-normalized Freundlich model, and Polanyi-Manes model (PMM) were used to analyze sorption isotherms. The relationship between sorption model parameters, organic carbon content (f_oc), and elemental C/N ratio was studied. The organic carbon normalized partition coefficient values (log K_oc = 1.50-3.13) in four different sorbents were less than the logarithm of the octanol-water partition coefficient (log K_ow = 3.40) of PCE due to high organic carbon contents. The log K_oc decreased linearly with log f_oc and log C/N ratio, but increased linearly with log O/C, log H/C, and log (N+O)/C ratio. Both log K_F,oc or log K_F,oc decreased linearly with log f_oc (R² = 0.88-0.92) and log C/N ratio (R² = 0.57-0.76), but increased linearly with log (N+O)/C (R² = 0.93-0.95). The log q_max,oc decreased linearly as log f_oc and log C/N increased, whereas it increased with log O/C, log H/C and log (N+O)/C ratios. The log q_max,oc increased linearly with (N+O)/C indicating a strong dependence of q_max,oc on the polarity index. The results showed that PCE sorption behaviors were strongly correlated with the physicochemical properties of soil organic matter (SOM).