• Nuclear Engineering and Technology
• /
• 제36권6호
• /
• pp.549-558
• /
• 2004

TTo comply with increasingly strict regulations for protection against radiation exposure, many nuclear power plants have been working ceaselessly to reduce and control both the radiation sources within power plants and the radiation exposure experienced by operational and maintenance personnel. Many research studies have shown that deposits of irradiated corrosion products on the surfaces of coolant systems are the main cause of occupational radiation exposure in nuclear power plant. These corrosion product deposits on the fuel-clad surface are also known to be main factors in the onset of axial offset anomaly (AOA). Hence, there is a great deal of ongoing research on water chermistry and corrosion processes. In this study, a magnetic filter with permanent magnets was devised to remove the corrosion products in the coolant stream by taking advantage of the magnetic properties of the corrosion products demonstrated a removal efficiency of over 90% for particles above 5${\mu}m$. This finding led to the construction of an electromagnetic device that causes the metallic particulates to flocculate into larger aggregates of about 5${\mu}m$ in diameter by using a novel application of electromagnetic flocculation on radioactive corrosion products.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1428-1437
• /
• 1988

본 연구에서는 흡수, 방사 및 비등방성 산란을 하는 축대칭 유한원통형매질에 서의 형식해로부터 Gaussian Quadrature를 이용하여 수치적으로 엄밀해를 구하고 P-1 과 P-3근사해법을 통하여 얻어진 해와 비교하여 P-1과 P-3근사해법의 타당성을 검토하 였다.또한 매질의 광학두께, 산란알베도, 벽면방사율, 형상계수 등을 주요 파라미 터로 하여 이들의 영향에 대하여 고찰하였다.

• 한국환경보건학회지
• /
• 제37권3호
• /
• pp.209-217
• /
• 2011

Objectives: In this study, the size distribution of airborne particulates ($PM_{10}$) was measured by using Cascade Impactors. The purpose of this study was to assess the size distribution of metal and ionic materials of $PM_{10}$. Methods: Samples were collected in the Kunsan industrial complex from April 2006 to January 2007. Results: The mass fraction of $PM_{10}$ had a bimodal distribution between 2.1-3.1 ${\mu}M$, and the average mass fraction of particles less than 2.1-3.1 ${\mu}M$ was 47%. Average concentrations of PM10 were 68.05 ${\mu}g/m^3$ and seasonal concentration 95.44 ${\mu}g/m^3$ for spring, 49.03 ${\mu}g/m^3$ for summer, 81.99 ${\mu}g/m^3$ for fall, 52.66 ${\mu}g/m^3$ for winter, respectively. Conclusions: Seasonal variations of $PM_{10}$ were significant for showing peak values in spring. The average concentrations of Cd, Cr, Pb, and Fe were 1.54, 4.51, 14.11, and 254.3 $ng/m^3$, respectively. The ratios of fine particles to total mass were 0.47 for $PM_{10}$, 0.45 for Cr, and 0.16 for Fe, 0.91 for Cd and 0.49 for Pb, respectively.

• 한국가스학회지
• /
• 제17권4호
• /
• pp.45-50
• /
• 2013

레조르시놀은 목재 및 타이어용 접착제, 합성수지 염료의 원료 등으로 널리 사용되고 있다. 이 물질은 상온에서 흰색 결정으로 분진은 공기 중에서 폭발성 혼합물을 형성할 수 있고 밀폐 공간에서 열에 노출 되었을 경우 폭발 위험성이 있다고 알려져 있다. 본 연구에서는 레조르시놀 취급시 화재 및 폭발 사고 등의 예방을 위한 해당 물질의 열분석, 열안정성, 분진폭발특성 및 최소점화에너지 등의 화재 폭발위험 특성을 평가하였다. 이들 연구결과는 레조르시놀의 사용 및 취급 시 공정의 안전 정보로 활용될 수 있을 것이다.

• 한국주조공학회지
• /
• 제17권4호
• /
• pp.385-392
• /
• 1997

The main objective of this study is to investigate the microstructure and tensile strength of $SiC_p$/Al alloy composites fabricated by die casting method. Die casting was performed using the preheated mold at the pouring temperature range of $620{\sim}750^{\circ}C$ under the pressure of $1,039 kgf/cm^2$. The low speed and a following high injection speed were 0.4 and 2.1 m/s, respectively. The microstructure of $SiC_p$/Al alloy composites fabricated by die casting method was found to be finer than that of composites fabricated by gravity casting. Also, SiC particulates were homogeneously distributed in refined Al matrix due to rapid solidification. The tensile strength of $SiC_p$/Al alloy composites fabricated by die casting method was found to be varied with cast temperature. The maximun tensile strength of $SiC_p$(10 vol.% and 20 vol.%)/Al alloy composites showed 380 MPa at the cast temperature of $750^{\circ}C$ and 363 MPa at the cast temperature of $700^{\circ}C$, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.605-608
• /
• 1993

Breakdown characteristics of a small rod-to-rod microairgap has been studied for obtain an optimum breakdown voltage and an airgap spacing to be used as an emission control means by the electrical arc-burning unburnt carbon particulates exhausted from a power station burner. It is found that the breakdown voltage at the rod-to-rod airgap spacing in the rang of $1{\sim}100{\mu}m$ decreased with decrease in the rod-to-rod airgap spacing. And there were no minimum breakdown voltage on a $V_b$-Pd characteristics which is known as the minimum voltage in Paschen's law in air atmosphere. Breakdown voltages of the airgap at the constant airgap spacing were $V_{b-dc}>V_{b-ac}>V_{b-pulse}$, and it was lowest for the pulse voltage applied. As a result, it is found that a pulse power was one of effective power compared with dc or ac to be used as such an unburnt carbon particulate emission control means and the airgap spacing became to several tens ${\mu}m$, then the breakdown voltages were down to several handreds voltages.

• 대한방사성의약품학회지
• /
• 제5권1호
• /
• pp.26-35
• /
• 2019

$^{188}Re$ is one of the most readily available generator derived and useful radionuclides for therapy emitting ${\beta}^-$ particles (2.12 MeV, 71.1% and 1.965 MeV, 25.6%) and imageable gammas (155 keV, 15.1%). The $^{188}W/^{188}Re$ generator is an ideal source for the long term (4-6 months) continuous availability of no carrier added (NCA) $^{188}Re$ suitable for the preparation of radiopharmaceuticals for radionuclide therapy. Rhenium-188 has been used for the preparation of therapeutic radiopharmaceuticals for the management of diseases such as bone metastasis, rheumatoid arthritis and primary cancers. Several early phase clinical studies using radiopharmaceuticals based on $^{188}Re$ -labeled phosphonates, antibodies, peptides, lipiodol and particulates have been reported. In this review, we addressed the current development status of $^{188}Re$ radiopharmaceuticals for liver cancer therapy and their applications.

• 대한금속재료학회지
• /
• 제48권9호
• /
• pp.813-818
• /
• 2010

In current automobile and electronic industries, the use of magnesium alloys where both energy and weight saving are attainable is increasing. Despite their light weight, there has been an inherent drawback arising from the surface vulnerable to be oxidized with ease, specifically under corrosive environments. To protect magnesium alloy from corrosion, the present work deals with the electrochemical response of the oxide layer on magnesium alloy specimen prepared by plasma electrolytic oxidation (PEO) method in an electrolyte with zirconia powder. Surface observation using scanning electron microscopy evidences that a number of zirconia particles are effectively incorporated into oxide layer. From the results of potentio-dynamic tests in 3.5 wt% NaCl solution, the PEO-treated sample containing zirconia particles shows better corrosion properties than that without zirconia, which is the result of zirconia incorporation into the coating layer. Corrosion resistance is also measured by utilizing salt spray tests for 120 hrs.

• Advances in nano research
• /
• 제14권2호
• /
• pp.195-200
• /
• 2023

Safety in sports is important because if an athlete has an accident, he may not be able to lead an everyday life for the rest of his life. The safety of sports facilities is very effective in creating people's sports activities, with the benefits of staying away from physical injury, enjoying sports, and mental peace. Everyone has the right to participate in sports and recreation and to ensure that they want a safe environment. This study prepares a very good Nickel-Cobalt -Silicon carbide (Ni/Co-SiC) nanocomposite with convenient geometry on the leg press machine rod, employing the pulse electrodeposition technique to reduce the rod's wear and increase the durability of sports equipment and control sports damages. The results showed that the Ni/Co-SiC nanocomposite formed at 2 A/dm2 shows extraordinary microhardness. The wear speed for the Ni/Co-SiC nanocomposite created at 4 A/dm2 was 15 mg/min, showing superior wear resistance. Therefore, the Ni/Co-SiC nanocomposite can reduce sports equipment's wear and decrease sports injuries. Ni-Co/SiC nanocomposite layers with various scopes of silicon carbide nanoparticles via electrodeposition in a Ni-Co plating bath, including SiC nanoparticles to be co-deposited. The form and dimensions of Silicon carbide nanoparticles are watched and selected using Scanning Electron Microscopy (SEM).

• 한국농공학회논문집
• /
• 제65권4호
• /
• pp.11-23
• /
• 2023

In Korea, open burning of agricultural residues is prevalent due to inadequate collection systems, which have caused environmental impacts such as GHGs and particulates. This illegal treatment of agricultural residues also results in economic loss, considering that agricultural residues can be utilized as resources such as pellets and energy sources. To understand the effect of avoiding open burning, this study evaluated the economic, environmental, and social effects of two alternative management options for agricultural residues: incineration and pelletizing. The study estimates the potential amount and dry weight by region for 18 items, taking various factors into account. Regarding the economic aspect, pelletizing facilities in all regions in Korea create economic benefits. This study shows that most regions have an environmental advantage by pelletizing residues. However, incineration creates more environmental benefits than pelletizing in metropolitan cities with relatively low density of residues. It is expected that the environmental, economic, and social findings of this study can be used to inform policies for bioenergy as the need for agricultural residue increases.