• 한국세라믹학회지
• /
• 제51권2호
• /
• pp.127-131
• /
• 2014

Precipitated calcium carbonate(PCC) inorganic fillers for plastic offera higher replacement ratio with improved mechanical properties than any other inorganic fillers. Due to its secure economic feasibility, its fields of application areexpanding. For optimized PCC grain size and polymer replacement ratio, it is good to maintain at least $0.035{\mu}m$ grains and keep double the grain size of distance between particles, depending on the molecular weight and volume replacement rate of the polymer. PCC has unique characteristics, ie, with smaller grain size, dispersibility decreases, and if grain size is not homogenous, polymer cracking occurs. The maximum replacement ratio of PCC is approximately 30%, but in the range of 10 - 15% it produces the highest mechanical strength. When mixed with a biodegradable plastic like starch, it also improves initial environmental degradability.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.256-263
• /
• 2018

The binder polymers for digital textile printing(DTP) pigment inks were prepared using miniemulsion polymerization with various monomer compositions to study effects of monomer compositions on particle size distribution, average molecular weight, Tg, and color strength and rubbing fastness of the dyed fabrics with the prepared binder based pigment ink. The monomers used were MMA(Methyl methacrylate), BA(Butyl acrylate), MAA(Methacrylic acid), NMA(N-methylol acrylamide), NEA(N-ethylol acrylamide) and the ratios of the monomers were changed. The particle size was the smallest with 136nm when the MMA to BA weight ratio was 4:16 and the largest with 290nm when the MMA, BA, MAA, NEA ratio was 2.5:17:0.25:0.25. However, the glass transition temperature was lowest with $-41.90^{\circ}C$ and the color strength and rubbing fastness of the resulting sample were the best when the MMA, BA, MAA, NEA ratio was used. This suggested that the introduction of the NEA monomer to the binder polymer for the pigment ink could be an efficient way to enhance the rubbing fastness of the DTP pigment inks present.

• 마이크로전자및패키징학회지
• /
• 제18권4호
• /
• pp.27-32
• /
• 2011

Tin(II) acetate와 tin(II) chloride의 주석 precursor를 사용하여 상온에서의 강제 환원 반응으로 주석 나노 입자를 합성시켰다. 0.015 g의 동일한 PVP 양을 첨가한 조건에서 PVP의 분자량이 클수록 비정상적으로 큰 입자들의 생성율이 증가되어 입도 범위가 매우 넓은 주석 나노 입자들이 생성됨을 확인할 수 있었다. 합성된 주석 나노 입자를 함유하는 DEG 용액의 DSC 분석 결과 1차 가열에서는 35 nm 미만 특정 크기 입자들의 수가 충분한 경우에서 DEG의 증발 흡열피크 외에도 특정 크기 입자들의 융점 강하 흡열 피크가 구분되게 검출되었다. 1차 DSC 측정 중 용융된 주석 나노 입자들은 서로 접촉하며 뭉쳐지는 현상이 발생하므로 2차 가열시에는 벌크 주석의 용융 피크에 해당하는 $232^{\circ}C$ 흡열 피크만이 관찰되었다.

• 한국염색가공학회지
• /
• 제15권5호
• /
• pp.321-326
• /
• 2003

In order for disperse dye based ink to be fitted with the critical requirements of ink jet printing, this study was undertaken to investigate the effects of 6 different dispersants on the milling efficiency of insoluble dye particles and dispersion stability of the final ink. It was found that a polystyrene dispersant with high molecular weight exerted relatively better dispersion stability which may be associated with its steric stabilization effect in the ink solution.

• Macromolecular Research
• /
• 제17권10호
• /
• pp.750-756
• /
• 2009

Stable, spherical, polystyrene particles were synthesized in ab initio dispersion polymerization by using the poly(methacrylic acid)[PMAA] macro-RAFT agent. The presence of the PMAA macro-RAFT agent on the polystyrene (PS) particles was confirmed by NMR and FTIR spectroscopy. The PS particle size was influenced by the concentration of the RAFT agent and monomer due to the initial nucleation. When the concentration of the PMAA macro-RAFT agent was increased from 2 to 10 wt% relative to the monomer, the average particle size decreased from 2.31 to 1.36 ${\mu}m$, the conversion decreased from 93.3 to 88.9%, the weight-average molecular weight increased from 46,300 to 150,200 g $mol^{-1}$ and the PDI decreased from 2.79 to 1.94, respectively. In particular, the incorporation of 10 wt% of PMAA macro-RAFT agent produced monodisperse PS spheres of 1.36 ${\mu}m$ with a coefficient of variation (CV) of 6.44%. Thus, the PMAA macro-RAFT agent worked as a reactive steric stabilizer providing monodisperse, micron-sized, PS particles.

• 한국환경과학회지
• /
• 제19권3호
• /
• pp.379-387
• /
• 2010

Sediments of Little Scioto (LS) River in Ohio was contaminated by poor disposal of creosote from Baker Wood Creosoting Facility. Among the primary compounds of creosote, Polycyclic Aromatic Hydrocarbons (PAHs) are the most common ingredient PAHs are known for toxic, carcinogenic and mutagenic compounds. There are many difficulties to remove the PAHs in nature environment because their characteristics are having a less water-solubility, volatile and low mobility properties as increasing the molecular weight. The generation of hydroxyl radicals (${\cdot}OH$) and hydrogen peroxide ($H_2O_2$) forms as well as high temperature (5000 K) and pressure (1000 atm) by a physico-chemical effects of ultrasound during a cavitation collapse can promote the degradation and desorption of PAHs in sediment And it can also produces shock wave and microjets which are able to change the size and surface of particle in solid-liquid system as one of physical effects. Therefore, we explored to understand the role of particle size, the effect of elimination for PAHs concentration by ultrasound and optimize the conditions for ultrasonic treatment. The condition of various size of particles (> $150{\mu}m$, < $150{\mu}m$) and solid-liquid ratio (12.5g/L, 25g/L) for the treatment was considered and ultrasonic power (430 W/L) with liquid - hexane extraction and microwave extraction method were applied after ultrasound treatment.

• 한국염색가공학회지
• /
• 제13권1호
• /
• pp.38-44
• /
• 2001

The adsorption ability of dyes on chitin, a natural polymer was investigated for decolorization of dye wastewater. Chitin was manufactured in lab by decalcification in dilute aqueous hydrochloric acid solution and deproteination in dilute aqueous sodium hydroxide solution with shrimp shells. Absorbance of residue solution of dyebaths after dye adsorptions of chtin were measured in varieties of dye concentration and dipping periods. Three kinds of Direct dyes -C.I. Direct Red 81 (red 81), C.I. Direct Brown l(brown 1) and C.I. Direct Green 26(green 26) - were used. Red 81 and brown 1 have smaller molecular weight than green 26. The results from experimentals were of]tamed as follows: 1) Adsorption of green 26 was improved in dyebath by addition of salt, but red 81 and brown 1 were not found any improvements. 2) Smaller size of chitin particles could be absorbed much more speedy. In this experiments, the smallest range of chitin particle size was $250\mu{m}$ and less. 3) The most efficient amount of chitin for 20m1 of dyebath was 0.2g, 4) Both of red 81 and brown 1 showed good and speedy adsorption abilities as dyestuffs of over 90 percent in just one minute in dyebath of 0.01% dye concentration. But green 26 was absorbed slowly because of its large molecular weight. It took 40minutes to absorb dyestuffs of over 90 percent in dyebath of 0.01% dye concentration.

• 분석과학
• /
• 제32권5호
• /
• pp.173-184
• /
• 2019

As the size of semiconductors becomes smaller, it is necessary to perform high precision polishing of nanoscale. Ceria, which is generally used as an abrasive, is widely used because of its uniform quality, but its stability is not high because it has a high molecular weight and causes agglomeration and rapid precipitation. Such agglomeration and precipitation causes scratches in the polishing process. Therefore, it is important to accurately analyze the size distribution of ceria particles. In this study, a study was conducted to select dispersants useful for preventing coagulation and sedimentation of ceria. First, a dispersant was synthesized and a ceria slurry was prepared. The defoamer selection experiment was performed in order to remove the air bubbles which may occur in the production of ceria slurry. Dynamic light scattering (DLS) and asymmetrical flow field-flow fractionation (AsFlFFF) were used to determine the size distribution of ceria particles in the slurry. AsFlFFF is a technique for separating nanoparticles based on sequential elution of samples as in chromatography, and is a useful technique for determining the particle size distribution of nanoparticle samples. AsFlFFF was able to confirm the presence of a little quantities of large particles in the vicinity of 300 nm, which DLS can not detect, besides the main distribution in the range of 60-80 nm. AsFlFFF showed better accuracy and precision than DLS for particle size analysis of a little quantities of large particles such as ceria slurry treated in this study.

• 공업화학
• /
• 제18권6호
• /
• pp.607-611
• /
• 2007

양이온성 천연고분자 물질로서 유전자와 효과적으로 복합체를 형성할 수 있는 저분자량 수용성 키토산(LMWSC)에 유전자 발현 효율을 높이기 위해 histidine을 컨쥬게이션 시킨 유전자 전달체를 제조하였다. 히스티딘-LMWSC의 제조는 무수프탈산으로 LMWSC의 아민기를 보호한 후 히스티딘과 결합한 다음 무수프탈산을 제거하는 반응으로 제조하였다. 제조한 유전자 전달체의 물리화학적 특성은 FT-IR과 NMR 스펙트럼을 통하여 확인하였고, 전기영동 결과로부터 본 실험에서 제조된 유전자 전달체와 DNA가 복합체를 형성하였다는 것을 알 수 있었다. 또한 유전자 전달체의 입자크기는 DLS를 이용하여 측정한 결과 히스티딘-LMWSC-DNA 복합체입자의 크기는 100~200 nm임을 확인하였다. 이로부터 히스티딘을 함유하는 LMWSC가 유전자 전달체로서 사용될 수 있음을 확인하였다.

• 폴리머
• /
• 제31권5호
• /
• pp.454-459
• /
• 2007

본 연구에서는 folic acid(FA)가 복합화된 저분자량 수용성 키토산(LMWSC) 나노입자(water soluble chitosan-folic acid nanoparticle, WSCFA)를 제조하고, 또한 DNA와 나노복합체 합성 및 특성을 분석함으로써 in vitro에서 세포내 독성을 평가하였다. WSCFA 합성을 확인하기 위하여 분광학적 분석 방법을 사용하여 분석하였으며, WSCFA 나노입자는 110 nm 이하의 입자 크기인 구형의 형태를 가지고 있음을 알 수 있었다. In vitro 세포내 독성 실험에서, WSCFA-DNA 복합체는 세포내 독성을 전혀 나타내지 않음으로 높은 세포 생존율을 보여주었다. 전기영동 실험을 통해 WSCFA의 DNA 응축능력을 확인하였고, in vitro에서의 전이효율은 형광 광도계에 의해 평가하였다.