• Journal of Environmental Science International
• /
• v.16 no.10
• /
• pp.1157-1167
• /
• 2007

In an effort to interpret the characteristics of fine particle concentrations in Busan, time variations of hourly monitored concentrations $PM_{10}$ (Particulate Matter with aerodynamic Diameter ${\le}10\;{\mu}m$) in Busan are analyzed for the period from 2000 to 2005. The characteristics of aerosol second generation formation process is also interpreted qualitatively, by using the statistical analysis of the meteorological variables including temperature, wind speed, and relative humidity. The result shows some significant annual, seasonal, weekly and diurnal variations of $PM_{10}$ concentrations. In particular, seasonal(i.e., spring) variations are governed by frequency of yellow sand events even for the non-yellow sand cases where yellow-sand days are eliminated in our analysis. However, in seasonal variation, summer season predominate lower $PM_{10}$ concentrations due to the frequent precipitation, and weekly and diurnal variations are both found to be reflecting the emission rate from traffic amount. Correlation coefficients between $PM_{10}$ concentration and meterological variables for non-yellow sand days show overall negative correlation with visibility, wind speed, cloud amounts, and relative humidity. However for non-precipitation days, during non-yellow sand period positive correlation are found clearly with relative humidity, suggesting the importance of secondary aerosol formation in Busan that can be achieved by both homogeneous aerosol formation and heterogeneous transformations resulting from hygroscopic aerosol characteristics.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.310-316
• /
• 2020

In this study, the stability and EMP shielding performance of metal-based industrial by-products aggregates with excellent conductivity and easy procurement to be used as concrete aggregates for EMP shielding are evaluated. The industrial by-products are electronic-arc-furnace oxidizing slag, copper smelting slag, and ferro-moldibdenum. The composition analysis of aggregates and aggregate stability are evaluated. As a result of the experiment, ferro-moldibdenum is shown to have l ow stability as an aggregate due to its high Free-CaO. The remaining aggregates are evaluated to be safe to use as aggregates for concrete. In addition, industrial by-products aggreagate-specimens excluding ferro-moldibdenum are shown higher compressive strength than the plain specimen. The recycle aggregates, electronic-arc-furnace oxidizing slag and copper smelting slag, are shown excellent EMP shielding performance, the EMP shielding performance is expected to increase if the average particle diameter of the aggregate is small or evenly distributed.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.1
• /
• pp.36-41
• /
• 2014

Since glass microsphere has high crush strength, low density and small particle size, it becomes alternative thermal insulation material for cryogenic systems, such as storage and transportation tank for cryogenic fluids. Although many experiments have been performed to verify the effective thermal conductivity of microsphere, prediction by calculation is still inaccurate due to the complicated geometries, including wide range of powder diameter distribution and different pore sizes. The accurate effective thermal conductivity model for microsphere is discussed in this paper. There are four mechanisms which contribute to the heat transfer of the evacuated powder: gaseous conduction ($k_g$), solid conduction ($k_s$), radiation ($k_r$) and thermal contact ($k_c$). Among these components, $k_g$ and $k_s$ were calculated by Zehner and Schlunder model (1970). Other component values for $k_c$ and $k_r$, which were obtained from experimental data under high vacuum conditions were added. In this research paper, the geometry of microsphere was simplified as a homogeneous solid sphere. The calculation results were compared with previous experimental data by R. Wawryk (1988), H. S. Kim (2010) and the experiment of this paper to show good agreement within error of 46%, 4.6% and 17 % for each result.

• Korean journal of applied entomology
• /
• v.30 no.3
• /
• pp.219-226
• /
• 1991

A cytoplasmic polyhedrosis virus isolated from the oriental tobacco budworm, Heliothis assulta (HaCPV), was studied on morphology of the polyhedron and virus particles, analysis of viral protein and nucleic acid, and bioassay of the HaCPV to determine the feasibility of application as a microbial control agent. The shape of polyhedron was hexagonal ranging 0.5-3.7 ${\mu}m$ and the virus particles were icosahedral outline measured 55 nm in diameter. Polyhedral protein was composed of a major polypetide of 24.3 Kd and 5 minor components and virus particle had seven polypeptides ranging in 28.0 Kd-133. 6 Kd by the SDS-P AGE. The genome of virus was segmented with 10 double stranded RNA in the total mol. wt. of 18.08 Md ranging in 0.65 Md -2.79 Md. The $LC_{50}$ values of the HaCPV to the 3rd instar of H. assulta larvae were calculated to $2.895{\times}10^5PIBs/ml$. The $LT_{50}$ values in the concentration of $5.0{\times}10^{6}PIBs/ml$ was 16.4 days.

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.92-97
• /
• 2011

The effect of Group I alkali acetate promoters on vinyl acetate (VA) synthesis was evaluated. Catalyst product selectivity and ethylene conversion are compared to the unpromoted catalyst in the fixed-bed reactor with oxidation reaction of ethylene and acetic acid in gaseous phase over Pd-Au/$SiO_2$ catalyst. It was found that: a) the promoters were stabilized on the catalyst surface, b) common effect for the alkali promoted Pd-Au catalysts increaseed in product selectivity and ethylene conversion compared to unpromoted catalyst (these effects increase from top to the bottom of Group I). These promoting effect is due to the common-ion effect of acetate, present in the reaction, resulting in an increase in the activity of the catalyst. In addition a complementary theory for the effect of Au in the structure of the catalyst is proposed the imposition of distribution of palladium particles through decreasing the particle's diameter.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2230-2237
• /
• 2020

Self-priming venturi scrubber is one of the most effective devices used to collect aerosols and soluble gas pollutants from gaseous stream during severe accident in a nuclear power plant. The present study focuses on investigation of dust particle removal efficiency of the venturi scrubber both experimentally and theoretically. Venturi scrubber captures the dust particles in tiny water droplets flowing into it. Inertial impaction is the main mechanism of particles collection in venturi scrubber. The water injected into venturi throat is in the form of jets through multiple holes present at venturi throat. In this study, aerosols removal efficiency of self-priming venturi scrubber was experimentally measured for different operating conditions. Alumina (Al₂O₃) particles with 0.4-㎛ diameter and 3950 kg/㎥ density were treated as aerosols. Removal efficiency was calculated for different gas flow rates i.e. 3-6 ㎥/h and liquid flow rates i.e. 0.009-0.025 ㎥/h. Experimental results depict that aerosols removal efficiency increases with the increase in throat velocity and liquid head. While at lower air flow rate of 3 ㎥/h, removal efficiency decreases with the increase in liquid head. A theoretical model of venturi scrubber was also employed and experimental results were compared with mathematical model. Experimental results are found to be in good agreement with theoretical results.

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.318-328
• /
• 2012

In this study, the one-component curable polyurethane resin was manufactured using blocked isocyanate and hybrid technology. To prepare the one-component curable hybrid polyurethane, silica hybrids including hydroxyl group was synthesized, and the size, shape and distribution of hybrid particle in polyurethane resin were confirmed. Then the dissociation property, mechanical property and molding property of blocked isocyanate were investigated. The dissociation property of blocked isocyanate in one-component curable polyurethane became better as the heating temperature and treatment time increased. The synthesized silica hybrid had spherical appearance and size of 23~27 nm in diameter, and it was observed that the hybrid particles were homogeneously distributed in polyurethane structure. In the case of hybrid polyurethane, the mechanical property, anti-abrasion and thermal property were higher than those of general polyurethane, and it was observed that the mechanical property was maintained when the plasticizer was introduced.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.285-290
• /
• 2009

The permeation experiments were carried out for the nominal pore size $0.1\;{\mu}m$ and 5 mm inner diameter microfiltration tubular membrane equipped with self-designed discharging rod in order to determine the effect of fouling reduction. Dioctyl tinoxide (DOTO) latex particle was used to prepare up to 0.5 wt% concentration of feed solution, and the experiments were operated within 1.6 bar. The permeation flux effect on the discharged rod was measured as a result of flux comparison between the cases of equipped and non-equipped discharge rod modules for every experiment. The permeation flux for the case using the discharged rod was enhanced to 20% at 1.6 bar operating pressure. The improvement on permeation flux for using the discharged rod was greater as the concentration of feed increased, and reached up to 43% under 0.5 wt% concentration of feed solution.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.4
• /
• pp.426-435
• /
• 2011

In this study, PM emission factors for commercial meat cooking were developed by the experiment using the similar restaurant model. The commercial material types of meat cooking were beef, pork and duck. And meat cooking materials were classified with marinated and raw cooking methods. The marinated and raw cooking methods were flat griddle (LPG) and under fired charbroiling grill. As a results, $PM_{10}$ emission factors for underfired pork cooking was estimated as 7.39 g/kg-meat which was the highest value in this study. The emission factors of under fired charbroiling grill method were higher than that of flat griddle method regardless of meat cooking material types and marinated meat. The particle size distribution of meat cooking was 0.23~5 ${\mu}m$ and median diameter was 2~2.5 ${\mu}m$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.9
• /
• pp.552-558
• /
• 2016

Goethite, ${\alpha}$-FeOOH have various applications such as absorbent, pigment and source for magnetic materials. Goethite particles were synthesized in a two step process, where $Fe(OH)_2$ were synthesized in nitrogen atmosphere using $FeSO_4$ as a raw material in the first process, and after that acicular goethite particles were obtained in an air oxidation process of $Fe(OH)_2$ in highly alkaline aqueous solution. Their phase and microstructure were investigated with XRD and FE-SEM. It was found that the morphology of goethite and the ratio of length-to-width (aspect ratio) of acicular goethite are dependent on the some factors such as R value ($OH^-/Fe^{2+}$), air flow rate and pH conditions. In particular, R value has the strongest influence on the synthesized goethite morphology. It is considered that the optimal value R is 4.5 because X-ray diffraction peaks of goethite have the highest intensity at that value. Morphology of goethite particles was controlled by air flow rates, showing that their size and aspect ratio are getting smaller and decrease, respectively as air flow rate increases. The largest goethite particle obtained is about 1,500 nm in length and 150 nm in diameter.