• Journal of the Korean Wood Science and Technology
• /
• 제13권3호
• /
• pp.3-26
• /
• 1985

The object of this study was to investigate the effects on physical and mechanical properties of wood particle and sawdust board combined with wire net. Conventional forming, press-lam, and veneer comply boards combining one to four wire net sheets were made from wood particle and sawdust with different spacings (8, 10, 12, and 18 Mok) and different wire diameters (0.35, 0.50, and 0.80mm) composing wire net. They were compared and analyzed statistically with specific gravity, thickness swelling, length swelling, bending properties (modulus of rupture, modulus of elasticity, work to proportional limit, and total work), internal bonding strength, and screw holding strength between wood particle and sawdust boards. The results obtained at this study as cording to the discussions might be concluded as follows; 1. In specific gravity, both particle and sawdust boards by press-lam method were higher than by conventional forming and veneer comply method, and the boards containing more wire net sheets also showed higher value. But the wire net spacings(Mok) had no influence on specific gravity. In general, particle board showed higher specific gravity than sawdust board. Veneer comply board showed lowest specific gravity values. 2. Both particle and sawdust boards by press-lam method was slightly lower than by conventional forming and veneer comply method in thickness swelling. The sawdust board containing 8, 12. and 18 Mok wire net showed lower thickness swelling than the corresponding particle board, but both sawdust and particle boards containing the T8 and 10 Mok wire net showed higher and similar thickness swelling. 3. Both particle and sawdust boards containing wire net showed no difference in MOR and MOE of bending. Comply board was the highest and particle board showed slightly higher than sawdust board in MOR and MOE values. 4. In work to proportional limit and total work in bending, both particle and sawdust boards containing thicker wire diameter and more wire net sheets showed higher value. From these facts, it is conceivable that boards with thicker wire diameter and more wire net sheets show increasing resistance against external force. But there was no significant difference between particle and sawdust borads. 5. In resistance against delamination (internal bonding strength), both sawdust and particle boards containing wire net showed lower value than control, and also showed decreasing tendency with more number of wire net sheet composed. Particle board showed higher resistance against delamination than sawdust board. 6. In screw holding strength, sawdust board containing thicker wire diameter and more wire net sheets showed higher value, but particle board by press-lam method was higher than by conventional forming and veneer comply method. Screw holding strength of particle board was higher than that of sawdust board.

• 한국건설순환자원학회논문집
• /
• 제2권1호
• /
• pp.120-127
• /
• 2006

폐목질원료로서, 제재, 합판, PB, MDF와 폐침목 등의 해머밀에 의한 파쇄특성과 재생파티클 종류와 혼합비율에 따른 재생보드의 물성을 구명함으로써, 보드원료로서 재자원화 하는 방안을 모색해 보고자 하였다. 그 결과, 재생보드의 휨성질은 목질원료의 입자형태 및 입도분포에 크게 영향을 받으며, 파티클, 섬유와 같은 element가 압축고화된 상태의 판넬(PB, MDF)로부터 재생한 파티클은 물성저하를 초래하였다. 그러나, 재생파티클에 이미 도포 경화된 수지에 의해 재생보드의 치수안정성이 향상되는 효과가 있다. 따라서, 보드원료로서의 적합한 요건은 건전폐목재(제재, 합판)와 저급폐목재(PB, MDF)의 적정한 혼용에 있다고 할 수 있다. 본 연구에서는 건전폐목재 재생파티클과 재생 PB파티클의 혼용시험에서 제재파티클이 휨성질(MOR, MOE)과 박리강도에 기여하고, 합판파티클은 치수안정성에 더욱 기여하는 경향을 나타냈다. 또한 보드의 중층용 원료로 재생PB파티클의 혼합비율을 증가함에 따라서 보드의 휨성능이 감소되는 경향을 나타냈지만 혼합률 40%까지는 유의차가 없이 보드 15형(MOR : $153kgf/cm^2$, MOE : $27.5tonf/cm^2$) 수준의 성능이 구비되었다. 향후 생활폐목재(폐가구 등)와 같은 저급폐목재의 활용방안이 강구된다면 보드원료의 수급에 한층 기여할 수 있을 것이다.

• 한국환경과학회지
• /
• 제24권2호
• /
• pp.245-251
• /
• 2015

The main objective of this study is to recovery valuable metals with metal particle size distributions in waste cell phone PCBs(Printed Circuit Boards) by means of pulverization and nitric acid process. The particle size classifier also was evaluated by specific metal contents. The PCBs were pulverized by a fine pulverizer. The particle sizes were classified by 5 different sizes which were PcS1(0.2 mm below), PcS2(0.20~0.51 mm), PcS3(0.51~1.09 mm), PcS4(1.09~2.00 mm) and PcS5(2.00 mm above). Non-magnetic metals in the grinding particles were separated by a hand magnetic. And then, Cu, Co and Ni were separated by 3M nitric acid. Particle diameter of PCBs were 0.388~0.402 mm after the fine pulverizer. The sorting coefficient were 0.403~0.481. The highest metal content in PcS1. And the bigger particle diameter, the lower the valuable metals exist. The recovery rate of the valuable metals increases in smaller particle diameter with same leaching conditions. For further work, it could improve to recovery of the valuable metals effectively by means of individual treatment, multistage leaching and different leaching solvents.

• Journal of the Korean Wood Science and Technology
• /
• 제22권1호
• /
• pp.54-65
• /
• 1994

This research carried out to investigate the effects of inorganic materials in paper sludge on the thermal degradation and of paper sludge addition on physical and mechanical properties of paper sludge-wood particle mixed boards in comparison with unmodified particleboards. Also these unmodified particleboards and paper sludge-wood particle mixed boards were soaked in aqueous solutions of fire-retardant chemicals(diammonium phosphate and zinc chloride), and their fire retardancy were tested by oxygen index method and ISO ignition test to determine the feasibility of paper sludge, industrial waste, as a recyclable resource in fabrication of fire-resisting panels for building material. Since the redrying of fire-retardant treated particleboards and paper sludge-wood particle mixed boards were made by press drying method, this process was a simple and effective method. On the other hand, flexural bending strength and internal bonding strength were also analysed to evaluate mechanical properties through standard method.

• Journal of the Korean Wood Science and Technology
• /
• 제43권3호
• /
• pp.364-373
• /
• 2015

본 연구는 밀도와 귤박첨가율이 다른 톱밥-귤박 파티클보드의 동적 정적탄성계수와 휨강도를 측정, 비교하여 밀도와 귤박의 첨가율이 파티클보드의 역학적 성능에 주는 영향과 동적탄성계수와 정적 휨강도 성능사이의 관계를 조사하였다. 톱밥-귤박 파티클보드의 밀도가 0.4에서 $0.6g/cm^3$로 증가할수록 휨성능은 증가하여, 밀도가 휨성능에 크게 영향하였으며, 밀도 $0.4g/cm^3$와 $0.5g/cm^3$의 톱밥-귤박 파티클보드에서 귤박의 첨가량이 증가할수록 휨성능은 감소하는 경향을 나타내었다. 톱밥-귤박 파티클보드의 동적탄성계수, 정적탄성계수 그리고 휨강도 사이에 높은 상관관계가 확인되었으며 양단 자유 휨진동시험에 의한 동적탄성계수로부터 비파괴적으로 정적 휨강도 성능의 예측이 가능할 것으로 사료되었다.

• 한국가구학회지
• /
• 제10권1호
• /
• pp.95-102
• /
• 1999

The objective of this paper was the development of boards made from waste newspapers. The boards were produced from particle ONP(old newspaper) to reduce energy consumption in the board production process. ONP boards bonded with polyurethan adhesives(PU) were produced on a laboratory scale, and their physical and mechanical properties were examined. The average density of the ONP was $0.48g/cm^3$, and the densities of the boards were $0.50-0.90g/cm^3$. Therefore, th compaction ratios of the boards were in the range of 1.04-1.88. The results obtained were as follows: 1) An increase in board density results in a corresponding improvement in bending properties. 2) An increase in board density results in increased thermal conductivity. 3) In this research, ONP board can be used only for interior applications. To gain exrerior applications, the dimensional stability properties(thickness swelling and water absorption) need to be improved.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.130-137
• /
• 2014

Nondestructive evaluation (NDE) method by using a resonance frequency mode was carried out for ceramics made from particle boards with different phenol resin impregnation ratios (30, 40, 50, 60%) at carbonizing temperature of $800^{\circ}C$. The material for ceramics was Miscanthus sinensis var. purpurascens board. Dynamic modulus of elasticity increased with increasing impregnation ratio. There was a close relationship of dynamic modulus of elasticity and static bending modulus of elasticity to modulus of rupture (MOR). However, the result indicated that correlation coefficient is higher in dynamic modulus of elasticity to MOR than that in static modulus of elasticity to MOR. Therefore, the dynamic modulus of elasticity using resonance frequency by free vibration mode is more useful as a nondestructive evaluation method for predicting the MOR of ceramics made from Miscanthus sinensis var. purpurascens particle boards by different phenol resin impregnation ratios.

• 한국가구학회지
• /
• 제14권2호
• /
• pp.31-38
• /
• 2003

This study was carried out to investigate characteristics of wood-based panels and wood-cement board for the possible uses as flooring and wall materials. The optimum cement/wood ratio(C/W ratio) of wood~cement board manufactured by clamp-pressing was from 2.7 to 3.2. The dimesional stability was superior in the C/W ratio of 3.2. Particularly, the dimensional stability of cement board using fine particle for particleboard face layer was favorable through three levels of C/W ratio. According to types of wooden material, bending strength of cement board using coarse particle for particleboard core layer or old newspaper(ONP) fiber was relatively higher than others. Thermal conductivities of wood-cement boards were no lower than that of gypsum board, and higher than those of plywood and boards. In case of wood-cement board of the C/W ratio of 2.7, the fire-proof performances of cement composite boards were greater than that of gypsum board, and weight loss reached to about a half of gypsum board. Then, wood-cement boards showed superior fire-proof performance compared to wood-based panels.

• Journal of the Korean Wood Science and Technology
• /
• 제21권2호
• /
• pp.57-65
• /
• 1993

The aim of this research was to manufacture sludge-particle board using paper sludge with wood particle and to investigate physical and mechanical properties of various sludge-particle boards, fabricated with ratios of sludge to particle of 10 to 90, 20 to 80, 30 to 70, 40 to 60 and 50 to 50(oven dry weight based). Sludge-particle boards were manufactured by urea-formaldehyde resin, 0.8 target specific gravity, and 10mm thickness. It was possible to manufacture sludge-particle board as the same processing in the present particleboard manufacturing system. This sludge-particle board have different properties as composition ratios of sludge and particle. And sludge-particle board made from 10 percent to 20 percent of sludge mixing ratio have similar mechanical properties compared with control particleboard. Especially, the sludge-particle board made from 10 percent to 40 percent mixing ratios of sludge have superior to control particleboard in internal bond, screw withdrawal holding strength and modulus of elasticity. In the case of dimensional stability, water absorption was increased and thickness swelling was decreased as increased with sludge mixing proportion. The sludge-particle board made of different mixing ratios of our laboratory design was able to concluded that there is possibility of partial substitution of wood particle materials.

• Journal of the Korean Wood Science and Technology
• /
• 제4권1호
• /
• pp.33-37
• /
• 1976

본 연구(硏究)에서는 합판공장(合板工場) 및 목재공장(木材工場)이면 어디서나 나오는 톱밥을 효율적(效率的)으로 이용(利用)하고자 하는 목적(目的)으로 P.b.에 섞어 사용(使用)할 때 P.b.의 곡강도(曲强度), 흡수율, 함수율, 비중에 미치는 영향을 조사하여 분석(分析) 고찰하였다. 결과(結果) 및 고찰에 의해서 얻어진 본연구(本硏究)의 결론(結論)은 다음과 같다. 1) P.b.의 bending strength에 있어서 톱밥을 섞지 않은 것과 비교해서 5% 섞은 것 까지는 차(差)가 없으며 10%, 15%섞으면 곡강도가 떨어졌으며 20% 섞은 것은 현격한 차이(差異)가 생겼다. 2) Absorbility는 톱밥을 섞을 수록 증가하는 경향으로 나타났으며, 20% 섞은 경우는 현격한 증가가 생겼다. 3) 함수율과 비중(比重)은 각 구성간에 차이(差異)가 없었다. 분산(分散) 분석(分析)을 한 결과(結果) 유의성(有意性)이 없었다. 이상과 같이 톱밥을 P.b. 제조시(時)에 5% 정도 섞는 것은 P.b 의 질(質)에 별다른 영향을 주지 않는 것으로 나타났다.