• Journal of Families and Better Life
• /
• v.29 no.6
• /
• pp.153-167
• /
• 2011

This study analyzed changes in postpartum depression in mothers from one month after childbirth to the first year using panel data collected overtime, in an effort to determine the relationship between the amount of change and child-rearing system variables. The subjects were 1097 mothers who belonged to both the lower and upper $30^{th}$ percentile groups in the depression change distribution of the 2008 Korean Children Panel Study (PSKC), a large, population-based study conducted by the Korea Institute of Childcare and Education. The data were analyzed by t-tests, $x^2$ tests, partial correlation coefficient analyses and regression analyses. The results are summarized as follows: First, the mothers' postpartum depression showed a significant increase during the first year as opposed to the first month after birth. Second, after controlling for socio-demographical variables of the mothers, the changes related to depression showed a positive relationship with child-rearing stress, and the child's emotional temperament, but showed a negative relationship with the mother's self-esteem, the child's birth order, and the father's participation in child-rearing activities. Third, variables having a significant effect on changes in postpartum depression were the mother's self-esteem and child-rearing stress, the child's age in months, and social support. Variables pertaining to the mother's characteristics variables had a more powerful effect than other child-rearing system variable categories. The results suggest the necessity to develop a parental education program or a mother-child health service in consideration of the variables that affect mothers, as determined in this study, in an effort to prevent postpartum depression.

• Tribology and Lubricants
• /
• v.35 no.5
• /
• pp.286-293
• /
• 2019

In friction and wear tests that use friction force microscopy (FFM), the wear debris transfer to the tip apex that changes tip radius is a crucial issue that influences the friction and wear performances of films and coatings with nanoscale thicknesses. In this study, FFM tests are performed for bilayer $MoS_2$ film to obtain a better understanding of how geometrical and chemical changes of tip apex influence the friction and wear properties of nanoscale molecular layers. The critical load can be estimated from the test results based on the clear distinction of the failure area. Scanning electron microscopy and energy-dispersive spectroscopy are employed to measure and observe the geometrical and chemical changes of the tip apex. Under normal loads lower than 1000 nN, the reuse of tips enhances the friction and wear performance at the tip-sample interface as the contact pair changes with the increase of tip radius. Therefore, the reduction of contact pressure due to the increase of tip radius by the transfer of $MoS_2$ or Mo-dominant wear debris and the change of contact pairs from diamond/$MoS_2$ to partial $MoS_2$ or Mo/$MoS_2$ can explain the critical load increase that results from tip reuse. We suggest that the wear debris transfer to the tip apex should be considered when used tips are repeatedly employed to identify the tribological properties of ultra-thin films using FFM.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.1
• /
• pp.43-47
• /
• 2013

Purpose: A duplicated ureter is congenital renal malformations with ureter in two. Patients with duplicated ureter are in force to $^{99m}Tc-DMSA$ scan at surgery before and after. In existing examination, at produce result after $^{99m}Tc-DMSA$ scan, didn't compare to upper pole and lower pole with malformed kidney and compared to only relative uptake ratio. Therefore, this study will examine about utility of set a partial region of interest and to functional recovery of renal cell through change of upper pole uptake ratio of malformed kidney by setting each partial region of interest in upper pole and lower pole of malformed kidney in $^{99m}Tc-DMSA$ examination in surgery before and after. Materials and Methods: Pediatric patients with malformed kidney of incomplete duplicated ureter, 15 patients were enrolled in this study. Scanning were scan 3 to 4 hours after injection of $^{99m}Tc-DMSA$ 1.5 ~ 1.9 MBq/kg. Region of interest were each set in normal kidney, upper pole and lower pole with malformed kidney. Region of interest were set with same condition and method to images of surgery before and after that radio technologist 1 person, resident of nuclear medicine 1 person and doctor of urology together. Therefore, this study were compared to uptake ratio (A: B: C) that normal kidney (A), lower pole of malformed kidney (B) and upper pole of malformed kidney (C) about uptake ratio changes of malformed kidney in follow-up examination of surgery before and after. Results: When compared to 15 patients, uptake ratios were increased 7 persons and decreased 8 persons. Among increased 7 persons, it were periods of follow-up examination that 2 persons were 14 months, 4 persons were 12 months and 1 person was 8 months after surgery. Among decreased 8 persons, it were periods of follow-up examination that 4 persons were 12 months 3 persons were 6 months and 1 persons were 4 months after surgery. Conclusion: Existing study could not see the exact uptake ratio changes of malformed kidney because using only the overall Left-Right kidney uptake ratios. But a setting partial region of interest was able to see exactly what changes in the uptake of each upper pole and lower pole of malformed kidney. Because recovery of renal parenchymal cells is difficult in an evaluation of short period of time, follow-up examination should be made in long period of time. How to set up partial region of interest be thought that it would be useful.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.863-868
• /
• 2016

In this study, the precise shapes of sunken ships and information on seafloor topography were analyzed using data obtained from a multi-beam echo sounder. The state of each sunken ship was analyzed by processing diverse imagery data which was compared with data obtained from past investigations to determine changes in the state and circumjacent seafloor topography. Apparent changes in the seafloor topography around one sunken ship, the "Pacific Friend", were found from stern to bow as a result of continued submarine erosion and sedimentation. In the case of sunken ship "No. 7 Haeseong", the partial collapse of the bow was revealed in the seabed images captured in 2015, though it had still been intact in images captured during the Korea Hydrographic and Oceanographic Agency's investigation in 2011. This partial collapse was presumed to have resulted from the effects of continued tidal currents, the cargo load of the ship and continued corrosion of the ship over a long time on the seabed. Continuous monitoring of residual fuel inside the ship is necessary to avoid leakage and potential marine pollution. By conducting image analysis on these sunken ships, it has been determined that the structural safety of the ships is seriously influenced by tidal currents and seafloor topography, while the hulls will be continuously changed by corrosion. As a result, it can be concluded that the development of prediction and response techniques that take into consideration residual fuel leakage and environmental changes according to the geological characteristics of sunken ships is necessary.

• Near Infrared Analysis
• /
• v.2 no.1
• /
• pp.43-53
• /
• 2001

A non-invasive spectroscopic method is presented for the measurement of pulmonary edema. Both early diagnosis and quantitative edema estimates were investigated. The spectroscopic determination of pulmonary edema involved the acquisition of diffuse reflectance spectra in the near-infrared (NIR) region with change in water concentration - water is the main constituent of edema fluid. Pulmonary edema was induced into the excised perfused lungs of seven animals by elevating the hydrostatic pressure. Estimates of edema were ascertained from a partial least squares regression of the measured spectral response. Actual edema was determined from the change (increase) in total lung weight. Estimates in relative lung weight increases due to in vitro edema were made with the near infrared spectra. The results revealed that fluid accumulation produced spectral changes in the O-H and C-H absorptions as well as scattering changes in the spectra. Histology of the lung was used to verify the presence or absence of interstitial and alveolar edema. Results demonstrated that near infrared spectroscopy might provide a new tool for clinical assessment of pulmonary edema.

• Korean Journal of Oriental Medicine
• /
• v.1 no.1
• /
• pp.159-178
• /
• 1995

After acupuncture needles were inserted on apkok(LI4) and Kokchi(LI11) accupoints, physiological changes induced by the varitions of 'Qi' were measured. The body temperature and pulse frequency were fromed to be decreased observed and we presumed that the needle insertion induced some changes of Qi in meridian and this seemed to be achieved by a certain process of Qi induction. We applied EAV, nervinemeter and pulse-taking machine which is widely used as oriental medicine instruments, to the same vounteers and observed the significant variations for each apparatus in spite of partial lack of reproducibility. In this paper, we described about the physical quantity measured by the medical appartatus and how it was related to the variation of Qi The proper conditions used for good oriental medicine instruments have also been suggested.

• Journal of Welding and Joining
• /
• v.32 no.6
• /
• pp.64-69
• /
• 2014

The applications by using fiber laser have increased recently. However, due to high beam quality of fiber laser, it is inappropriate to apply the existing laser welding monitoring technology to the fiber laser welding as it is. On this study, thus, we analyzed emission signal with RMS and FFT for the in-process monitoring during fiber laser welding. 12mm-thick 304L stainless steel sheet was used in fiber laser welding and the result showed as follows: The intensity changes in RMS did not clarify the distinction between full penetration and partial penetration. However, as welding speed increases, specific frequency also increases in regards of frequency analysis by using FFT.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.642-648
• /
• 2006

Mushroom tyrosinase (MT) structural changes in the presence of $Cu ^{2+}$ and $Ni ^{2+}$ were studied separately. Far-UV CD spectra of the incubated MT with the either of the metal ions indicated reduction of the well-ordered secondary structure of the enzyme. Increasing in the maximum fluorescence emission of anilinonaphthalene-8-sulfonic acid (ANS) was also revealing partial unfolding caused by the conformational changes in the tertiary structure of MT. Thermodynamic studies on the chemical denaturation of MT by dodecyl trimethylammonium bromide (DTAB) showed decrease in the stability of MT in the presence of $Cu ^{2+}$ or $Ni ^{2+}$ using their activation concentrations. Both activities of MT were also assessed in the presence of different concentrations of these ions, separately, with various monophenols and their corresponding diphenols. Kinetic studies revealed that cresolase activity on p-coumaric acid was boosted in the presence of either of the metal ions, but inhibited when phenol, L-tyrosine, or 4-[(4-methylphenyl)azo]-phenol was substrate. Similarly, catecholase activity on caffeic acid was enhanced in the presence of $Cu ^{2+}$ or $Ni ^{2+}$, but inhibited when catechol, L-DOPA, or 4-[(4-methylbenzo)azo]-1,2-benzenediol was substrate. Results of this study suggest that both cations make MT more fragile and less active. However, the effect of the substrate structure on the MT allosteric behavior can not be ignored.

• Molecular & Cellular Toxicology
• /
• v.3 no.4
• /
• pp.267-272
• /
• 2007

Environmental and anthropogenic changes affect the health and stability of marine ecosystem. In this study we aimed to identify molecular biomarkers for ecotoxicological pollutants risk assessment in the rockfish (Sebastes schlegeli). We designed primers based on conserved sequences by multiple alignments of target genes from related species, and cloned the partial cDNAs of cytochrome P450 (CYP1A1), glutathione S-transferase (GST), metallothionein (MT), superoxide dismutase (SOD), ubiquitin (UB), vitellogenin (VTG) and $\beta$-actin by reverse transcription polymerase chain reaction (RT-PCR) from S. schlegeli. Northern blot results indicated that these six genes expressions were significantly induced by benzo[a]pyrene (BaP, 1 ${\mu}M$) and that the level of each of their transcripts increased in BaP-exposed rockfish in a time-dependent manner. This study suggests that transcriptional changes in these six genes may be used for monitoring environmental exposure to polycyclic aromatic hydrocarbons (PAHs).

• Journal of the Korean Society of Costume
• /
• v.56 no.7 s.106
• /
• pp.31-41
• /
• 2006

The purpose of this study is to formulate a concept of naturalism in fashion and verify the design characteristics found in such designs via reviewing the concept of naturalism and its influence on dress making in different periods in history. The references from various academic fields including philosophy, literature and fine arts were used to examine how the naturalism was formulated over the years. This study was then to identify the naturalistic influences by closely examining various Western dress codes found in literature, publications and actual samples. The results of this study shows that the close examination of naturalism in fashion with the changes of times displayed the complex evolution process over the years, and they were classified by four distinctive categories; Retro, Ecology, Primitive and Ethnic. Naturalism in the contemporary fashion design showed higher frequency of adopting ecological and retro styles, especially retro style adoption being on the rise, combining wide range of partial components of each style. The color usage showed the skewed concentration on YellowRed, Red and Yellow colors with pale, light grayish and grayish tones.