• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.32-38
• /
• 2006

During stereolithography processes, the shape errors such as curl distortion and distortion of side face are generated due to the shrinkage of liquid resins. In this study, the effects of dimension of part and structure of supports on the shape error are examined. Cubic specimens which have different thicknesses are manufactured and their deformations are measured with CMM. Thicker part generates smaller curl distortion of top face and larger of bottom face. Also thicker part generates larger distortion of side face until part thickness increases to about 20mm. Larger stiffness of supports which is obtained by shorter spacing of the supports and line type contact instead of point type contact generates smaller shape error of the part.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.337-345
• /
• 1999

The purpose of this study was to compare the shape of root canal after instrumentation with some engine driven NiTi files. Thirty narrow and curved canals(15-35 degree) of mesial canals of extracted human mandibular first molars were divided into three groups. Group 1: After radicular access with Gates Glidden drill, apical shaping using step back method with Flexo file Group 2: After radicular access with Gates Glidden drill, apical shaping with Profile .04 Group 3: Canal shaping with GT file and Profile .04. Using modified Bramante technique, the root was sectioned at 2 mm from apical foramen, height of curvature, 2 mm from canal orifice. Canal centering ratio, amount of transport, amount of dentin removed, shape of canal were measured and statistical analysis is done using SPSS Program V 7.5. The results were as follows: 1. Canal centering ratio of group 3 was the lowest at coronal part, but there was no statistical difference. Centering ratio of group 2 was the lowest at curve part, and there was statistical difference between group 1(P<0.05). Centering ratio of group 2 was the lowest at apical part, but there was no statistic difference. 2. Amount of transport of group 3 was the lowest at coronal part, but there was no statistical difference. Amount of transport of group 2 was the lowest at curve part, and there was statistical difference between group 1(P<0.05). Amount of transport of group 3 was the lowest at apical part, and there was statistical difference between group 1 and group 2, group 1 and group 3(P<0.05). 3. Amount of dentin removed of group 3 was the lowest at coronal part, bur there was no statistical difference. Amount of dentin removed of group 2 was the lowest at curve part, but there was no statistical difference. Amount of dentin removed or group 2 was the lowest at apical part, and there was statistical difference between group 1 and group 2, group 1 and group 3(P<0.05). 4. The shape of the canals after instrumentation varied among the groups. The majority of canals at coronal and curve part for group 1 were round in shape(7 in 10), those at apical part were oval(8 in 10). The majority of canals at coronal part for group 2 were round in shape(7 in 10) and there was no difference in the number of shape at other part. There was no difference in the number of shape at every part for group 3. As above results, NiTi rotary instrumentation showed a trend to remain more centered in the canal than SS file instrumentation. At using NiTi file, coronal shaping with Gates Glidden drill was not statistically different from shaping with GT file. But shaping with GT file showed tapered canals, so it may be said that shaping with GT file is a safe and valuable instrumentation method.

• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.861-871
• /
• 1996

In this study, a fuzzy control algorithm was developed for the randomly irregular shape of cold-rolled strip. Currently developed fuzzy control algorithm consists of two parts: the first part calculates the changes of work and intermediate roll bender forces based on the symmetric part of the irregular strip shape, and the second part calculates the weighting factors based on the asymmetric part and modifies the pre-determined roll bender forces according to the weighting factors. As a result of this, bender froces applied at the both sides of the cold-rolled strip were different. In order to simulate the continuous shape control. fuzzy controller developed was linked with emulator which was developed based on neural network. The fuzzy controller and emulator developed simulated the cold rolling process until irregular shape converged to a tolerable range in producing uniform cross-sectional strip shape. The results obtained from the simulation were reasonable for various irregular strip shapes.

• 패션비즈니스
• /
• 제11권4호
• /
• pp.82-91
• /
• 2007

The purpose of this study is to evaluate the differences of visual effects by variations in the shoulder length and puff volume of the puff sleeve blouse. The stimuli are 21 samples: 3 variations of the shoulder length and 7 variations of the puff volume. The data has been obtained from 40 fashion design majors. The data has analyzed by Frequency, Factor Analysis, ANOVA, Scheffe's test and MCA method. The result of the study are as follows. The visual effects by the shoulder length and puff volume are composed of 4 factors : the width of the upper body, the shape of the breast part, the shape of the neck part and the shape of the upper arm. In these factors, the width of the upper body is estimated by most important factor. In view of the visual effects by variation of the shoulder length, the shorter shoulder length goes, the more positive visual image comes in the shape of the breast part. In comparison of the differences of visual effects by the 7 variations of puff volume, the arm looks thin and long when the puff volume goes enough and the breast part has a better visual assesment in case the puff volume goes poor. In the interaction effects between the shoulder length and puff volume, the shoulder length have significant differences in the shape of the breast part, the shape of the neck part and the shape of the upper arm and puff volume has significant difference in the width of the upper body.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.109-112
• /
• 2005

Friction welding is welding method to use frictional heat of two material. A defect of friction welding is that create flash. The flash is part that must have cut after welding finished. But the welding part with flow gallery by friction welding can't cut flash. Therefore the welding part with flow gallery was designed with no effect in flow. In this research, decide the welding shape parameter of welding part with flow gallery and do friction welding analysis. In friction welding analysis, must input necessary S-S curve, friction coefficient by temperature change, upset pressure, RPM etc. According to analysis result, decided the optimal shape of welding part with no effect in flow.

• 한국생활과학회지
• /
• 제23권6호
• /
• pp.1171-1189
• /
• 2014

In order to provide the basic data for creating the environment which can efficiently reflect prefer fit along with body size when selecting clothes size in the indirect purchasing environment, this study analyzed the difference of ready-made jacket part-specific fit preferred by fashion models in their twenties and female college students. This study was to analyze the impact of body size, recognition of body part-specific characteristics shape, body satisfaction on prefer fit of jacket. As for the difference of prefer fit depending on the body size, female college students preferred more loose fit than models. The difference according to recognition of body part-specific characteristics shape turned out to be significant for prefer fit depending on the degree of bend of neck, arm length, bend of back recognition and matching fit was found to be preferred as they recognize their body shape to be normal and the difference according to body satisfaction appeared to be significant in the terms of bend of back, hip width/protrusion, torso size/length, sleeve length, whole body shape and they turned out to prefer matching fit as they are satisfied with their body. As shown above, body size, recognition of body part-specific characteristics shape, especially body satisfaction have a great influence on prefer fit of jacket and therefore, if preparing for a size selection step according to body shape and satisfaction in the jacket size selection process, customers' satisfaction in jacket size may be improved and it is considered to be helpful for both consumers and sellers.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.763-766
• /
• 2000

Rapid Prototyping(RP) techniques have their unique characteristics according to the working principles: stair-stepped surface of parts due to layer-by-layer stackin, low build speed caused by line-by-line solidification to build one layer, and additional post processing to improve surface roughness, so it is required very high cost to introduce and to maintain RP apparatus. The objective of this study is to develop software for automatic generation of unit shape part (USP) for a new RP process, Variable Lamination Manufacturing using linear hotwire cutting technique and expandable polystyrene foam sheet as part material (VLM-S). In order to examine the applicability of the developed software to VLM-S, USP's of general three-dimensional shapes, such as an auto-shift lever knob and a pyramid shape were generated.

• 소성∙가공
• /
• 제26권2호
• /
• pp.95-100
• /
• 2017

In this study, the method of process design for side forming of a tooth part used for a component of automobile transmission was suggested using FE-simulations. To develop the side forming for the tooth part, in this paper, the shape factors of B.T.Pin was considered as design parameters. The shape factors of B.T.Pin were selected to be the round of pin, reinforced angle and reinforced length. Based on FE simulation results, appropriate shape factor without causing any defects was selected. In addition, to increase the strength of pin, the combination of shape factor having minimum stress after side forming was selected using FE-simulation. In addition, with design of a die set, cold side forming of the tooth part was experimented to estimate effectiveness of the designed B.T.Pin. From experiments, it was found that the tooth part with complete formation of the tooth was obtained without making any forming defects and punch fracture.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.64-70
• /
• 2001

In all the Rapid Prototyping (RP) techniques, the computer-aided design (CAD) model of a three-dimensional part is sliced into horizontal layers of uniform, but not necessarily constant, thickness in the building direction. Each cross- sectional layer is successively deposited and, at the same time, bonded onto the previous layer. The stacked layers form a physical part of the model. The objective of this study is to develop a software for automatic generation of unit shape part(USP) for a new RP process, Variable Lamination Manufacturing using the linear hotwire cutting technique and expandable polystyrene foam sheet as part material(VLM-S). In order to examine the applicability of the developed software to VLM-S, USPs of general three-dimensional shapes, such as an auto-shift lever knob and a pyramid shape were generated.

• 설비공학논문집
• /
• 제26권3호
• /
• pp.137-143
• /
• 2014

A gasket is known as an important component for mechanical sealing between mating surfaces. In case of the refrigerator, a gasket is generally installed into the edge line of a door to prevent cold air leaking out from the inside of a cabinet. The gasket shape used in a refrigerator is very complicated; it has a few deformable small rooms and wings (upper part) and inserting part (lower part) into the door. By the intricate shape, it takes much time and trouble on analysis by using a full-shape model. To settle down this problem, an effective design way of a gasket is proposed in this work. The inserting part is parametrically designed using FEM without considering the complicate upper part, Through this work, computational time and efforts are much reduced comparing to the full-shape analysis method. And the performance of a newly designed gasket was evaluated qualitatively.