• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.839-846
• /
• 2007

The objective of the present study was to investigate the effect of dietary supplementation of the ginseng by-product on growth performance and meat quality in finishing pigs. The animals used in the experiment were a total of 24 Landrace×Yorkshire and weighted 65.81±2.02kg. The experimental diets were basal diet(CON) and 2.5% ginseng by-product(GBP), which replaced lupin in basal diet. The pigs were allotted at 4 pigs per pen with three replicate pens per treatment by completely randomized design. In growth performance, ADFI was significantly lower(P<0.0001) in GBP than in CON. In plasma biochemical composition, total protein(P<0.01), blood urea nitrogen(P<0.03), glucose(P<0.01), albumin(P<0.02), calcium(P<0.01) and inorganic phosphate(P<0.01) were significantly higher in GBP than in CON. Carcass and meat quality were not significantly different between treatments. Total ginsenoside content on meat was significantly higher(P<0.0001) in GBP than in CON. TBARs was significantly lower in GBP than in CON for 6 days(P<0.03) and 12 days (P<0.06), respectively. Our research indicates that plasma biochemical composition, total ginsenoside content and TBARs were affected when replaced with ginseng by-product. Ginseng by-product in the pig diet increased pig muscle ginsenoside, indicating that ginseng by-product can be used as a feed additive.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.63-74
• /
• 2006

During the construction of circular underground pipe, the non-proper compaction along the pipe and the decrease of compaction efficiency have been the main problems to induce the failure of underground pipe or facility. The use of CLSM (controlled low strength materials) should be one of the possible applications to overcome those problems. In this research, the full-scaled field test and the numeric analysis using PENTAGON-3D FEM program were carried out for three different cases on the change of backfill materials, including the common sand, the soil from construction site, and the CLSM. From the full-scaled test in field, the use of in-situ CLSM as backfill materials reduced the vertical and lateral deformation of the pipe, as well as the deformation of the ground surface. The main reason for reducing the deformation would be the characteristics of the CLSM, especially self-leveling and self-hardening properties. The measured earth pressure at the surround of the corrugated pipe using the CLSM backfills was the smaller than the other cases, and the absolute value was almost zero. Judging from the full-scaled field test and FEM analysis, the use of CLSM as backfill materials should be one of the best choices reducing the failure of the underground pipes.

• Radiation Oncology Journal
• /
• v.18 no.1
• /
• pp.67-72
• /
• 2000

Background :The authors have developed a Digital image chart(DIC) and digital Radiotherapy Record System (DRRS). We have evaluated the DIC and DRRS for reliability, usefulness, ease of use, and efficiency. Materials and Methods :The basic design of the DIC and DRRS was to build an digital image database of radiation therapy Patient records for a more efficient and timely flow of critical image information throughout the department. This system is a submit of comprehensive radiation oncology management system (C-ROMS) and composed of a picture archiving and communication system (PACS), a radiotherapy information database, and a radiotherapy imaging database. The DIC and DRRS were programmed using Delphi under a Windows 95 environment and is capable of displaying the digital images of patients identification photos, simulation films, radiotherapy setup, diagnostic radiology images, gross lesion Photos, and radiotherapy Planning isodose charts with beam arrangements. Twenty-three clients in the department are connected by Ethernet (10 Mbps) to the central image server (Sun Ultra-sparc 1 workstation). Results :From the introduction of this system in February 1998 through December 1999, we have accumulated a total of 15,732 individual images for 2,556 patients. We can organize radiation therapy in a 'paperless' environment in 120 patients with breast cancer. Using this system, we have succeeded in the prompt, accurate, and simultaneous access to patient care information from multiple locations throughout the department. This coordination has resulted in improved operational efficiency within the department. Conclusion :The authors believe that the DIC and DRRS has contributed to the improvement of radiation oncology department efficacy as well as to time and resource savings by providing necessary visual information throughout the department conveniently and simultaneously. As a result, we can also achieve the 'paperless' and 'filmless' practice of radiation oncology with this system.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.4
• /
• pp.249-256
• /
• 2007

This experiment was conducted to compare the agronomic characteristics and productivity in introduced hairy vetch cultivars and developed new Korean Hairy vetch cultivars in two areas of the experimental field of Grassland and Forage Crops Division, National Institute of Animal Science from 2005 to 2006. The experiment was arranged in randomized complete block design with three replications. A total of 11 hairy vetch cultivars used in this study including 9 introduced cultivars (Penn-02, Sander, Latigo, Welta, Ostsaat, VV4712, Minnie, Barlosa and Capello) and 2 Korean cultivars (Cold green and Cheong pa). The early flowering varieties of Minnie, Barlosa, Capello and Cold green were grown as early maturity cultivars, while the late flowering varieties of Penn-02, Sander, Latigo, Welta, Ostsaat, VV4712 and Cheong pa were grown as medium and late maturity. The winter hardiness of hairy vetch was good except for Minnie, Barlosa and Capello of early maturity cultivars. In this study, dry matter yield of VV4712 was the highest of 11 hairy vetch cultivars. And dry matter yield of medium and late maturity vetch increased in the middle region while that of early maturity increased in the south. The new Korean cultivar, Cheong pa, as a medium and late maturity hairy vetch was not bad compared to introduced cultivars and Cold green as an early maturity hairy vetch was an excellent cultivar compared to introduced cultivars in both regions. Latigo in NDF (neutral detergent fiber) and Welta in ADF (acid detergent fiber) were lower than other cultivars, while Sander in IVDMD (in vitro dry matter digestibility) and CP (crude protein) content were higher than other cultivars. The results of this experiment indicated that the productivity of hairy vetch cultivars was highest in VV4712, and Cheong pa and Cold green of new Korean cultivar were the promising cultivars of hairy vetch in Korea.

• Journal of Embryo Transfer
• /
• v.20 no.3
• /
• pp.289-295
• /
• 2005

This study was performed to investigate the relationship between Heat shock protein 70 (HSP70) gene polymorphism and in vitro fertilization(IVF) embryo development in the pigs. The single strand conformation polymorphism(SSCP) genotypes from HSP70 K1, K3 and K4 PCR products were detected different patterns. In cleavage rate of oocyte fertilized in vitro, HSP70 K1-AA genotype($73.1\%$) and K1-AB genotype($62.3\%$) showed significantly higher oocyte cleavage rate than HSP70 K1-BB genotype($49.3\%$)(p<0.05). And HSP70 K3-AA genotype ($72.4\%$) and K3-AB($62.2\%$) also showed significantly higher oocyte cleavage rate than HSP70 K3-BB genotype($49.1\%$)(p<0.05). The IVF embryo development of 2-cell stage according to HSP70 genotypes of sperm and pig breeds also showed a significant difference. The number of embryos developed to 2-cell stage in Landrace(28.8) and Duroc(29.8) were significantly higher than in Yorkshire(10.9)(p<0.05). And also HSP70 K4-AB genotype group(29.6) higher than HSP70 K4-AA genotype group(10.6)(p<0.05). However, the number of embryos developed to blastocyst stage did not showed significant differences among breeds as well as HSP70 genotypes. These resrults suggest that in vitro development in porcine early embryos may be affected by HSP70 genotypes and breeds.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1189-1196
• /
• 1998

Extraction conditions were optimized using response surface methodology for preparing high-quality ethanol extracts from cultivated Chrysanthemum petals. A fractional factorial design was applied to investigate effects of solvent ratio to sample $(X_1)$, ethanol concentration $(X_2)$ and extraction time $(X_3)$ at $60^{\circ}C$ on dependent variables of the extract properties, such as yellow color $(Y_1)$, carotenoids $(Y_2)$, soluble solids $(Y_3)$, phenolic compounds $(Y_4)$, electron donating ability $(Y_5)$, sensory color $(Y_6)$ and sensory aroma $(Y_7)$. Second-order models were employed to generate 3-dimensional response surfaces for dependent variables and their coefficients of determination $(R^2)$ were ranged from 0.8063 to 0.9963. Optimum extraction conditions for each variable were 115 mL/g, 97%, 18 hr in yellow color, 145 mL/g, 50%, 12 hr in carotenoids, 147 mL/g, 48%, 17 hr in soluble solids, 116 mL/g, 68%, 17 hr in phenolic compounds, 110 mL/g, 98%, 14 hr in electron donating ability, 101 mL/g, 48%, 54 hr in organoleptic color and 109 mL/g, 54%, 4 hr in organoleptic aroma, respectively. The range of optimum conditions at 16hr extraction for maximized characteristics of ethanol extracts was $103{\sim}122\;mL/g$ and $64{\sim}78%$. Predicted values at the optimum condition agreed with experimental values.

• The Journal of Internal Korean Medicine
• /
• v.28 no.3
• /
• pp.531-543
• /
• 2007

Backgrounds : Gastric cancer is one of the most frequent causes of cancer-related deaths worldwide. Gastric cancer patients frequently exhibit distant metastasis at the time of diagnosis and at present, there is no standard regimen after operation or chemotherapy to prevent metastasis and recurrences. Aims : The objective of the study was to compare the overall survival and disease free survival in patients treated with wheel balance therapy (WBT) with patients treated with WBT alone or the combination of WBT and conventional therapy and see if there were any significant improvements in survival between the two groups. Setting & Design : East-West Cancer Center at Daejeon University: retrospective study. Materials & Methods : We retrospectively analyzed 62 patients with stage III (40 patients) and stage IV (22 patients) gastric cancer who have received operation or chemotherapy 2 months prior to beginning WBT. The patients followed the WBT protocol which includes herbal medicine such as PSM capsules, OnePlus syrup, or HAD capsules which prevent metastasis and recurrences. Overall survival and disease free survival were analyzed and the patients were treated for 89.55 weeks and 49.27 weeks (median value) for stages III and IV, respectively. Statistical analysis used : Overall survival and disease free survival were estimated using the Kaplan-Meier method and the WBT and combination treatment arms were compared using the log rank test. Results : For stage III, the 3 year overall survival was 78.5% and disease free survival was 78.3%. Metastasis and recurrence occurred in 13 of 40 patients (32.5%). For stage IV, the 2 year overall survival was 18.2% and disease free survival was also 18.2%. Metastasis and recurrence occurred in 19 of 22 patients (86.4%). No significant difference was found statistically between the WBT alone and combination treatment arms though the combination regimen showed superiority (overall survival p=0.5093, disease free survival p=0.5175). Conclusions : WBT yielded satisfactory results in prolonging survival and preventing metastasis and recurrence in gastric cancer patients. The major treatment unit of WBT is composed of herbal medications (HAD, PSM capsules, OnePlus syrup) and a randomized, prospective study should be carried out using only this treatment unit in the future.

• Journal of the Korean Society of Radiology
• /
• v.6 no.1
• /
• pp.73-77
• /
• 2012

Recently, Interest to the photoconductor, which is used to flat form X-ray detector such as a-Se, $HgI_2$, PbO, CdTe, $PbI_2$ etc. is increasing. In this study, the film layer by using the photoconductive material with particle sedimentation was fabricated and evaluated. The quantization efficiency of the continuous X-ray with the 70 kVp energy bandwidth was analyzed by using the Monte Carlo simulation. With the results, the thickness of film with 64 % quantization efficiency was 180 ${\mu}m$ which is similar to the efficiency of 500 ${\mu}m$ a-Se film. And $HIg_2$ film has the high quantization efficiency of 74 % on 240 ${\mu}m$ thickness. The electrical characteristics of the 239 ${\mu}m$ $Hgl_2$ films produced by particle sedimentation were shown as very low dark current(under 10 $pA/mm^2$), and high sensitivity(19.8 mC/mR-sec) with 1 $V/{\mu}m$ input voltage. The SNR, which is influence to the contrast of X-ray image, was shown highly as 3,125 in low driving voltage on 0.8 $V/{\mu}m$. With the results of this study, the development of the low-cost, high-performance image detector with film could be possible by replacing the film produced by particle sedimentation instead to a-Se detector.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.745-758
• /
• 2005

Two hundred fifty eight Hanwoo steers were used in a completely randomized design experiment to determine the effects of ad libitum or restricted feeding of concentrates on body weight(BW) gain, feed intake, blood metabolites and hematological parameters. Steers were assigned at 6 months of age to feeding groups of ad libitum(T1) or restricted(T2) by 18 months of age. Steers in both groups were fed ad libitum from 19 months of age. The restrictive feeding levels were 1.2-1.5% of BW for the growing period and 1.7-1.8% of BW for the early fattening period. Average daily gains were significantly higher in T1 than in T2 from 10 to 14 months of age, but were significantly higher in T2 than in T1 from 20 to 24 months of age(p<0.05). Total dry matter intake(DMI) was higher in T1 than in T2 at 10, 12 and 16 months of age(p<0.05). Total DMI of T2 was higher than that of T1 at 22 months of age(p<0.05). Feed conversions were significantly lower in T2 than in T1 from 20 to 30 months of age(p<0.05). Blood albumin concentrations were significantly higher in T2 than in T1 at 12, 14, 16 and 18 months of age. Blood triglyceride concentrations were significantly higher in T1 than in T2 at 14 and 16 months of age(p<0.05). Blood inorganic phosphorus concentrations were significantly higher in T2 compared with T1 at 8, 10, 16 and 22 months of age(p<0.05). Mean corpuscular volume and mean corpuscular hemoglobin were significantly lower in T2 than in T1 from 8 to 12 months of age(p<0.05), but those were significantly higher in T2 than T1 from 10 months to 12 months of age(p<0.05). Present results may indicate that the restricted feeding for the growing period does not show adverse effects on body weight gain with better feed conversion for the following late fattening period.

• Science of Emotion and Sensibility
• /
• v.19 no.4
• /
• pp.21-32
• /
• 2016

Studies have observed various phenomena regarding the effect of the interaction between type, price, and brand image of a product on consumers' purchase intent and product quality perception. Yet, few have studied the effect of the interaction between product type and manufacturing method on these factors. However, the advent of three-dimensional (3D) printers added a new manufacturing method, 3D printing, to the traditional methods of handicraft and automated machine-based production, and research is necessary since this new framework might affect consumers' purchase intent and product quality perception. Therefore, this study aimed to verify the effects of the interaction between product type and manufacturing method on purchase intent and product quality perception. To achieve this, in our experiment 1, we selected product types with different characteristics (drone vs. violin vs. cup), and measured whether consumers preferred different manufacturing methods for each product type. The results showed that consumers preferred the 3D printing method for technologically advanced products such as drones, the handmade method for violins, and the automated machine-based manufacturing method, which allows mass production, for cups. Experiment 2 attempted to verify the effects of the differences in manufacturing method preferences for each product type on consumers' purchase intent and product quality perception. Our findings are as follows: for drones, the purchase intent was highest when 3D printing was used; for violins, the purchase intent was highest when the violins were handmade; for cups, the purchase intent was highest when machine-based manufacturing was used. Moreover, whereas the product quality perception for drones did not differ across different manufacturing methods, consumers perceived that handmade violins had the highest quality and that cups manufactured with 3D printing had the lowest quality (the purchase intent for cups was also lowest when 3D printing was used). This study is anticipated to provide a wide range of implications in various areas, including consumer psychology, marketing, and advertising.