• 시스템엔지니어링학술지
• /
• 제9권2호
• /
• pp.83-90
• /
• 2013

Integrated aircraft synthesis process for rapid analysis and design is described in this paper. Data flow between different analysis fields is described in details. All the data are divided into several groups according to importance and source of the data. Analysis of design requirements and certification regulations is carried out to determine baseline configuration of an aircraft. Overall design process can be divided into initial sizing, conceptual and preliminary design phases. Basic data for conceptual design are obtained from initial sizing, CAD and geometry analysis. Basic data are required input for weight, aerodynamics and propulsion analyses. Results of this analysis are used for stability and control, performance, mission, and load analysis. Feasibility of design is verified based on analysis results of each discipline. Design optimization that involves integrated process for aircraft analysis is performed to determine optimum configuration of an aircraft on a conceptual design stage. The process presented in this paper was verified to be used for light aircraft design.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.675-681
• /
• 2015

When many holes on a plane are machined simultaneously, the positional precision and machining efficiency are very important. Multi-spindle heads are typical order making products of which the number of shafts and hole positions vary depending on the size or form of the product. For the automatic design of multi-spindle heads, the design modules for power transmission systems for drive, idle, and spindle shafts were developed, and a design technique the determining the optimum position and number of idle shafts according to gear positions was developed. In addition, for the precise determination of the multi-spindle head, the design methods for the guide planes of columns, and feed mechanisms were devised. In addition, the design modules for accurate clamping and automatic transportation mechanisms were developed. Finally, in order to simplify and standardize the design process, the design analysis and simulation verification modules are integrated.

• Architectural research
• /
• 제12권2호
• /
• pp.9-14
• /
• 2010

This paper introduces an experimental design studio that explores the optimal use of current digital technologies in order to employ Building Information Modeling at the early phase of design process. Based upon the outcomes from the aforementioned studio, the paper discusses the integrated design strategies for BIM in the design process. In this paper, BIM is proposed as a design tool that increases an overal design productivity more effectively and efficiently compared to BIM as a construction tool with encouraging a design communication among different partakers in the design process.

• 디자인학연구
• /
• 제15권3호
• /
• pp.5-14
• /
• 2002

본 고는 종합 엔터테인먼트로 상징되는 테마파크의 다양한 부대시설 가운데 대표적 유희시설로 주목받는 라이드 어트랙션을 중심 소재로 고찰한 것이다. 특히, 최근에 많은 인기와 주목을 받는 라이드를 선별, 물리적 운동 특성과 점차 강한 자극체험을 갈구하는 현대인들의 현상, 그리고 어뮤즈먼트 디자인의 미래 향방 등을 모색, 종합적으로 전개한 것이다. 연구동기 및 주요 내용은 점차 고조되어 가는 현대인의 여가선용에 대한 다양한 욕구와 여가활동의 필연성을 인식하여, 그에 대한 문헌조사를 바탕으로 라이드 어트랙션으로 나타나는 놀이 방법과 라이더 즉, 사용자가 느끼는 신체적 반응 등을 논한 것이다 현재 테마파크에 있어서 라이드는 성인용 라이드(major ride)를 중심으로 점차 스릴 강도를 높이는 추세로 진행되고 있다. 흔히 접할 수 있는 탑승놀이기구들은 시간에 따른 속도 변화율, 즉 가속도의 변화가 다양하기 때문에 일상생활에서 느끼는 교통기관과는 다른 전율(thrill)을 체험하게 되는 것이다. 라이드 어트랙션을 비롯한 모든 유희시설은 새로운 기술을 접목한 첨단성향으로 나타나고 있으나 그 내면의 소프트가 되는 테마나 발상의 빈곤은 어트랙션으로서의 기능을 수행하기 어려울 뿐만 아니라 테마파크의 존립자체도 위협하는 결과를 초래한다. 따라서 테마파크의 어트랙션 디자인에는 테마 그 자체를 표현하는 줄거리(story), 방법(method), 환경(environment) 등의 3가지 요소가 충실하게 반영되면서 그와 함께 문화산업적인 보편성을 고려할 때 엔터테인먼트의 종합 결정체로서 존재할 수 있다. 또한 서비스 제공자로서의 공원 측은 어트랙션 기획 및 운영에 있어서도 호스피탈리티 산업(hospitality industry)이라는 기본 개념에 충실할 때, 고객만족 관리가 재방문으로 연결되는 부분이라 할 수 있다.

• 한국환경복원기술학회지
• /
• 제26권4호
• /
• pp.35-50
• /
• 2023

As urbanization progresses, there is a growing and continuous demand for green spaces that provide ecosystem services. However, increasing the quantity of green spaces within major cities is challenging. Therefore, it is essential to pursue qualitative improvements that consider ecological characteristics of existing green spaces. In this study, we focus on local neighborhood parks in Seoul and present the following two questions through an evaluation utilizing ecological design indicators and land use data: 1. Which factor, design or location, has a greater influence on the ecological quality of neighborhood parks in Seoul? 2. Additionally, when evaluating ecological characteristics, is there similarity between assessments based on land-use data and those utilizing ecological design indicators? For this study, we conducted research on 30 neighborhood parks in Seoul and classified them into mountainous types (adjacent to mountains, natural terrain parks) and urban types (independently designed within 300m without existing forests) based on previous studies. Firstly, we conducted evaluations according to park location types. When comparing the evaluation scores of urban types (14 parks) and mountainous types (16 parks), significant differences were observed with scores of 16.86 and 35.94, respectively. Statistical analysis showed a significant difference between park types. In terms of habitat quality, the average values for urban and mountainous parks were 0.33 and 0.53, respectively, and statistically significant differences were observed between park types indicating differences in ecological potential according to park location. Secondly, when comparing the results of ecological potential evaluations based on park design and external connectivity, a correlation was found between habitat quality and total scores according to evaluation indicators. The correlation analysis showed significant linear relationships between habitat quality and total scores, biodiversity scores, and ecosystem function scores, with high positive correlation coefficients of 0.829, 0.861, and 0.802, respectively. This study holds significance in analyzing the ecological aspects of urban parks through the lens of both park location characteristics and design indicators. The analysis results underscore the importance of planning and managing ecologically sound urban parks contingent upon their location. Moreover, the utilization of appropriate ecological design indicators can help alleviate environmental limitations surrounding parks. Integrating these considerations could enhance the ecological quality and ecosystem services of urban green spaces.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권1호
• /
• pp.30-40
• /
• 2002

A 2.45GHz double-balanced modified Gilbert-type CMOS up-conversion mixer design is introduced, where the PMOS current-reuse bleeding technique is demonstrated to be efficient in improving conversion gain, linearity, and noise performance. An LO buffer is included in the mixer design to perform single-ended to differential conversion of the LO signal on chip. Simulation results of the design based on careful modeling of all active and passive components are examined to explain in detail about the characteristic improvement and degradation provided by the proposed design. Two kinds of chips were fabricated using a standard $0.35\mu\textrm$ CMOS process, one of which is the mixer chip without the LO buffer and the other is the one with it. The measured characteristics of the fabricated chips are quite excellent in terms of conversion gain, linearity, and noise, and they are in close match to the simulation results, which demonstrates the adequacy of the modeling approach based on the macro models for all the active and passive devices used in the design. Above all the benefits provided by the current-reuse bleeding technique, the improvement in noise performance seems most valuable.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.286-289
• /
• 2000

PHEMT's with three different doping structures, -SH(single-heterojunction), DH (double-heterojunction), and DC(doped-channel)-,were designed, fabricated and characterized to study the effect of doping layer structures on the performance of millimeter-wave PHEMT's. 0.25${\mu}{\textrm}{m}$ DH-PHEMT with below-channel doping of 1$\times$10$^{12}$ c $m^{-2}$ was superior to SH-PHEMT by 40％ in $I_{dss}$, 20％ in f/sib T/ and showed broador gm- $I_{D}$ characteristics which is advantageous to power applications DH-PHEMT showed similar DC and small-signal performance compared with DC-PHEMT. Taking the much higher carrier mobility into considerations, DH-PHEMT is believed to be the best candidate for millimeter-wave, low-noise and/or power applications.s.s.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.384-387
• /
• 2006

Vertical L/UL (Load/Unload) velocity is very important parameter to determine the L/UL performance, and the vertical velocity is determined by the actuator velocity and the ramp profile. However, it is not easy to precisely control the actuator rotating velocity during the L/UL process. Especially in emergency parking, servo system doesn't operate, it is impossible to control an actuator velocity. Then, the vertical unloading velocity depends on only ramp profile. The ramp height and the sliding length for L/UL process in SFF (Small Form Factor) HDD are restricted due to slimness and small media. For these reasons, it is very difficult to design the ramp profile in SFF HDD. Therefore, this study analyzes the unloading dynamic characteristics for various ramp profiles and makes the thesis for ramp profile design.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권2호
• /
• pp.86-93
• /
• 2004

The DCT algorithm needs an efficient hardware architecture to compute inner product. The conventional design method, like ROM-based DA(Distributed Arithmetic), has large hardware complexity. Because of this reason, a CSHM(Computation Sharing Multiplication) was proposed for implementing inner product by Park. However, the Park's CSHM has inefficient hardware architecture in the precomputer and select units. Therefore it degrades the performance of the multiplier. In this paper, we presents the optimization design method for inner product using CSHM algorithm and applied it to implementation of 1-D DCT processor. The experimental results show that the proposed multiplier is more efficient than Park's when hardware architectures and logic synthesis results were compared. The designed 1-D DCT processor by using proposed design method is more high performance than typical methods.

• 정보저장시스템학회논문집
• /
• 제2권2호
• /
• pp.150-155
• /
• 2006

Vertical L/UL (Load/Unload) velocity is very important parameter to determine the L/UL performance, and the vertical velocity is determined by the actuator velocity and the ramp profile. However, it is not easy to precisely control the actuator rotating velocity during the L/UL process. Especially in emergency parking, servo system doesn't operate, it is impossible to control an actuator velocity. Then, the vertical unloading velocity depends on only ramp profile. The ramp height and the sliding length for L/UL process in SFF (Small Form Factor) HDD are restricted due to slimness and small media. For these reasons, it is very difficult to design the ramp profile in SFF HDD. Therefore, this study analyzes the unloading dynamic characteristics for various ramp profiles and makes the thesis for ramp profile design.