• Environmental Engineering Research
• /
• v.19 no.4
• /
• pp.309-316
• /
• 2014

The water quality improvement of golf course ponds, as representative stagnant stream channels, was evaluated by applying a biological activated carbon (BAC) process composed of four consecutive activated carbon reactors. The study was performed from autumn to winter in order to evaluate the feasibility of the BAC process under low temperature conditions. In the study, water quality of pond A (target pond) and pond B (reference pond) were monitored. Pond water was pumped into the BAC process, and was then returned to the pond after treatment. The optimal conditions were determined to be 2 hr of empty bed contact time (EBCT) at a temperature above $4^{\circ}C$, in which improvements of chemical oxygen demand (COD), total nitrogen (TN) and total phosphorus (TP) of pond A compared to pond B were 3.62%, 3.48% and 1.81%, respectively. On the other hand, as the temperature was below $4^{\circ}C$, some degree of water quality improvement was achieved even when EBCT were 1 or 0.5 hr, suggesting that the BAC process can be successfully applied for the improvement of pond water quality in winter months. The values of biomass concentration and microorganism activity in each condition were highest where 2 hr of EBCT was applied at a temperature above $4^{\circ}C$, but values were similar throughout all treatment conditions, and thus, adsorption is considered to be the dominant factor affecting process efficiency. From the denaturing gel gradient electrophoresis (DGGE) results, no significant differences were observed among the activated carbon reactors, suggesting that the number of reactors in the system could be decreased for a more compact application of the system.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.529-540
• /
• 2011

The purpose of this study was to evaluate the kinematic characteristics of $5^{th}$ and $6^{th}$ hurdle clearances during the final of the 110-m hurdles at the IAAF World Championships, Daegu 2011. To this end, the hurdling motions of the top 4 ranked male hurdlers in the competition were analyzed. A total of 12 cameras were used to record their motions, with a sampling frequency of 120 Hz. The cameras were calibrated using $11{\times}2{\times}1\;m$ control objects that covered all of the lanes (1st~8th lanes). After analyzing all the data, we arrived at the following results. In the take-off phase, all athletes revealed similar take-off times (CT), and similar distances from the take-off to hurdleto (L1) and hurdle to landing (L2). In particular, Turner, ranked $3^{rd}$, had an inconsistent L2 and may need further training to correct it. In the flight phase, Richardson, ranked $1^{st}$, showed the longest flight distance, whereas Xiang, who was ranked $2^{nd}$, showed the highest CG height from the hurdle. For the step patterns, to increase the pitch frequency, Richardson and Xiang used shorter 3-step lengths than Turner and Oliver.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.511-520
• /
• 2011

The purpose of this study was to provide scientific information to track and field coaches and athletes through the analyses of the biomechanics characteristics of the top 4 sprinters in the men's 100 m final in the IAAF World Championships Daegu 2011. Twelve video cameras (Sony, Japan) were used to capture the mid portion of the race (40 m - 70 m) with a sampling frequency of 60Hz. Biomechanical variables including the right ankle, knee and hip angles, the trunk angle, and the velocity of center of mass (COM) in the running direction, were calculated with the Kwon 3D program (Visol, Korea). Correlation coefficients between the COM velocity and each variables were calculated using Matlab 2008a (MathWorks, USA) at an alpha level of 0.05. The findings indicated that Yohan Blake (JAM) showed greater range of motion at the ankle and hip. Walter Dix(USA) showed greater knee and trunk movement, and Kim Collins (SKN) showed more dorsi-flexed and extended trunk angles during the race. Finally, Christophe Lemaitre (FRA) showed more plantar-flexed ankle with a less trunk motion, throughout the analyzed race.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.23-32
• /
• 2010

The capacity of natural purification was limited by the interruption of natural flow and the problems such as eutrophication were occurred by nutritive salts accumulation in stagnant stream. Moreover, the inflow of non-point sources causes non-degradable materials to increase in stagnant stream. In this study, an upflow biological activated carbon (BAC) biofilm process comprised of anoxic, aerobic 1, and aerobic 2 reactors were introduced for treatment of stagnant stream and SS, $BOD_5$, $COD_{Mn}$, $COD_{Cr}$, TN, and TP were monitored in the upflow BAC biofilm reactors with continuous cycling. In order to simulate stagnant stream, the lake water of amusement park and golf course were stored as influent in a tank of $2m^3$ and hydraulic retention time (HRT) was changed into 6, 4, and 2 hours. At HRT 4hr and the lake water of amusement park as influent, the removal efficiencies of SS, $BOD_5$, $COD_{Mn}$, $COD_{Cr}$, TN, and TP showed the best water quality improvement and were 69.8, 83.0, 91.3, 74.1, 74.7, and 88.9%, respectively. At HRT 4hr and the lake water of golf course as influent, the removal efficiencies of SS, $BOD_5$, $COD_{Mn}$, $COD_{Cr}$, TN and TP were 78.5, 78.0, 80.2, 74.9, 55.6 and 97.5%, respectively. As the results of polymerase chain reaction - denaturing gel gradient electrophoresis (PCR-DGGE), microbial community was different depending on influent type. Fluorescence in situ hybridization (FISH) showed that nitrifying bacteria was dominant at HRT 4 hr. The biomass amount and microbial activities by INT-DHA test were not decrease even at lower HRT condition. In this study, the upflow BAC biofilm process would be considered to the water quality improvement of stagnant stream.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.11-19
• /
• 2015

Objective : The purpose of this study was to analyze the correlation between physical factors (X-factor, X-factor stretch) and club factors (club speed, ball speed, club path, smash factor, vertical launch angle, spin rate, flight time, total length) during impact and it affect on the total distance of the ball during a golf driver swing. Background : There were not enough studies that analyzed the correlation between physical factors(X-factor, X-factor stretch) and club factors(club speed, ball speed, club path, smash factor, launch angle, spin rate, flight time, total length) during a purpose swing to increase total distance. Method : For this study, 9 right handed professional male golfers (KPGA) were chosen. The test subject group used their own drivers and each took a total of 10 swings. These swings consisted of 5 purpose swings to increase total distance and 5 normal swings. Results : The purpose swing to increase total distance showed larger physical factors(X-factor, X-factor stretch) compared to a normal swing however the results were not statistically significant. Total distance increased during a purpose swing as a result of ball and club speed. Conclusion : The results showed that club factors, ball speed and club speed contributed the most in affecting the total distance of the ball during a purpose swing.

• Journal of Global Scholars of Marketing Science
• /
• v.8
• /
• pp.89-110
• /
• 2001

The purpose of this study were to examine the types of apparel store, to investigate consumer characteristics related to the apparel store patronage behaviors, and to find out the differences of casual relationships on apparel store patronage behaviors in store types. Data were collected from 451 consumers living in Pusan and analysed by factor analysis, ANOVA and path analysis. The results were as followings : First, the types of apparel store recognized by consumers were composed by five factors such as Casual-wear store, Traditional market store, Neighboring store, Department store, and Small-sized department store. Second, apparel store patronage behaviors have significant differences recreational and economic shopping orientations, Fashionability in store evaluative creteria, social psychologic risks in perceived risks, and observation store information source. Third, there were differences in casual relationships an apparel store patronage behaviors across store types. Casual-wear store patronage behaviors were directly influenced by the information source, and traditional market store patronage behaviors did by the perceived risk. Apparel shopping orientations directly influenced Neighboring store, and department store patronage behaviors. Evaluative creteria of store directly did small-sized department store. That is, consumer characteristics directly influencing to patronage behaviors were different across apparel store types. Therefore, the marketers of apparel store should understand consumer characteristics related to patronage behaviors and affecting variable and then try to encourage consumer's store patronage behavior.

• Asian Journal of Turfgrass Science
• /
• v.19 no.1
• /
• pp.47-55
• /
• 2005

This study was conducted to carry out with the structure of ground-beetles(Coleoptera: Carabidae) community surveyed depending on altitude in Mt. Gabjangsan, Sangju, from August 2004 to October 2004. The 1,439 individuals in 15 species of 4 families were found in the survey. In the monthly taxa diversity, September of 697 individuals and 12 species was higher than August of 102 individuals and 8 species and October of 640 individuals and 5 families. The diversity index and evenness index were the lowest, but richness index was the highest in 800m altitude. The richness index was the highest in 400m altitude and evenness index was the highest in loom altitude. Synuchus cycloderus is a dominant species in 300-800m altitude and Synuchus nitidus is a dominant species in loom altitude. In these results, indicator insects for the evaluation of golf courses environment in mountain area construction were selected as S. cycloderus and S. nitidus.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.1
• /
• pp.47-55
• /
• 2011

The purpose of this study was to perform a kinematic analysis of Harai-goshi(hip throw) in superior female judo players. From our analysis, it appeared desirable for the player to shorten the duration of the technique for maximum results. It was also desirable for the player to draw the opponent backward while simultaneously maneuvering her close to her own body. A turning movement of the body toward the left side was found to be required for the technique, during which the player must lower the position of the center of gravity. During the subsequent angular change of the elbow, the player winds the elbow and, by moving the left shoulder, pulls the opponent toward her. The player lowers the body center by bending the left knee and letting the right knee extend, while turning the upper body and bending the hip joint. The player then draws the opponent in, contacts the opponent closely, turns, and stretches the right knee and hip joint rapidly and concisely, completing the move; it was also found to be desirable for the angular velocity to be increased for maximum efficacy.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.4
• /
• pp.295-306
• /
• 2013

The purpose of this study was to provide high school male shot putters training methods of gliding and delivery motion through comparative analysis of kinematic characteristics. To accomplish this purpose, three dimensional motion analysis was performed for the subjects(PKC, KKH, YDL) who participated in high school male shot putter competition on 92nd (2011), 93rd (2013) National Sports Festival. The subjects were filmed by four Sony HXR-MC2000 video cameras with 60 fields/s. The three-dimensional kinematic data of the glide, conversion and delivery phase were obtained by Kwon3d 3.1 version. The data of the shoulder rotational angles and projection angles were calculated with Matlab R2009a. The following conclusions had been made. With the analysis of the gliding and stance length ratio, the gliding length was shorter at the TG than the SG with short-long technique but the gliding and stance length ratio was 46.8:53.2% respectively. The deviation of the shots trajectory from APSS(Athlete-plus-shot-system) revealed that the PKC showed similar to "n-a-b-c-I" of skilled S-shape type, KKH and YDL showed "n-a-d-f-I'" of unskilled type. Furthermore, they showed smaller radial distance from the central axis of the APSS and the shots were away from the linear trajectory. From this characteristics, The PKC who performed more TG than SG had shorter glide with S-shape of APSS(skilled type) showed the better record than others with technical skill. But KKH and YDL had bigger glide ratio with "n-a-d-f-I'" of unskilled type and improved their records with technical factor. The projection factor had an effect on the record directly. Because PKC maintained more lower glide and transition posture with momentum transfer through COG's rapid horizontal velocity respectively the subject possessed the characteristics of high horizontal and vertical velocity with large turning radius from shot putter to APSS.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.4
• /
• pp.269-278
• /
• 2017

Objective: The purpose of this study was to develop a goal setting method for increasing the probability of a holed in a side inclined putting stroke. Method: Three-dimensional video data was recorded at a frequency of 120 hz per second after synchronizing 19 infrared motion capture systems (Qualisys, Gothenburg, Sweden). Putting green used a polycarbonate plate ($1.2{\times}2.4{\times}0.01meter$) with coefficient of friction (${\mu}=0.062$) and a real curve of the actual hole. Results: The velocity ratio between the club and the ball was 1:1.6 under various ball speed conditions in this study. The overall position of the break is 1 m to 1.4 m from the point where the ball leaves. If there is a slope, the ball follows the target line by the straightening force, and when it reaches 1 m position, the straightening force decreases by 30~50% and reaches to the deviation (break) point which is severely influenced by the slope. From here, the ball is aimed in a direction other than the target, and the size is affected by the slope. Conclusion: If there is a side slope, the ball moves away from the straight line, and the larger the slope, the closer the break point is to the starting point of the ball. Therefore, it is necessary to calculate the degree of departure according to the slope carefully, and it is preferable that the slower the speed is, the more the influence of the slope becomes. It is preferable to use the center of the hole as a reference when calculating the departure.