• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.341-346
• /
• 2002

In this study, an effect that compressive residual stress formed by shot-peening the surface of spring steel(JISG SUP-9) at each shot velocity(1800, 2200, 2600, 3000rpm) on the fatigue crack growth property and threshold stress intensity factor, ${\Delta}K_{th}$, was examined. Followings are the result (1) Compressive residual stress on surface of specimen was determined at each -601 MPa(1800rpm), -638 MPa(2200rpm), -587 MPa (2600rpm), -550 MPa(3000rpm) by shot velocity of shot peening and threshold stress intensity factor, ${\Delta}K_{th}$, fatigue crack growth rate, da/dN, on fatigue crack growth is obstructed by the compressive residual stress was determined at each $5.619\;MPa\sqrt{m}$(Un-peening), $8.319\;MPa\sqrt{m}$(1800rpm), $8.797\;MPa\sqrt{m}$(2200rpm), $7.835\;MPa\sqrt{m}$(2600rpm), $7.352\;MPa\sqrt{m}$(3000rpm) (2) Existing compressive residual stress by effect of shot velocity of shot-peening on relation of crack length. a, and number of cycle, N, was 2 times progressed in case of 2200rpm than specimen of Un-peening on fatigue life. And fatigue life was 1.6 times progressed incase of 3000rpm by Over peening. (3) Fatigue life of Material on Paris' law, $da/dN=C({\Delta}K)^m$, that effect of material constant, C, and fatigue crack growth exponent, m, was influenced by effect of. C and m.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.93-106
• /
• 2001

T-joint and hopper knuckle joint models are typical welded joints in ship structure, which are very susceptible to fatigue damage under service condition. Fatigue test and fracture mechanical analysis were performed on these joints to find out characteristics of fatigue behavior. Unified S-N curve was developed from the test results of these two types of joint using hot spot stress concept, and also propagation life was also estimated using Paris' crack propagation law. Residual stress effect on propagation life was considered in calculating propagation life, as was done with thermo-elasto-plastic FE analysis and residual stress intensity factor calculation. Fatigue life of similar kinds of welded joint could be predicted with this unified S-N curve and fracture mechanical analysis technique.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2107-2119
• /
• 2022

Accurate remaining useful life (RUL) prediction for critical components of nuclear power equipment is an important way to realize aging management of nuclear power equipment. The electric gate valve is one of the most safety-critical and widely distributed mechanical equipment in nuclear power installations. However, the electric gate valve's extended service in nuclear installations causes aging and degradation induced by crack propagation and leakages. Hence, it is necessary to develop a robust RUL prediction method to evaluate its operating state. Although the particle filter(PF) algorithm and its variants can deal with this nonlinear problem effectively, they suffer from severe particle degeneracy and depletion, which leads to its sub-optimal performance. In this study, we combined the whale algorithm with regularized particle filtering(RPF) to rationalize the particle distribution before resampling, so as to solve the problem of particle degradation, and for valve RUL prediction. The valve's crack propagation is studied using the RPF approach, which takes the Paris Law as a condition function. The crack growth is observed and updated using the root-mean-square (RMS) signal collected from the acoustic emission sensor. At the same time, the proposed method is compared with other optimization algorithms, such as particle swarm optimization algorithm, and verified by the realistic valve aging experimental data. The conclusion shows that the proposed method can effectively predict and analyze the typical valve degradation patterns.

• Computers and Concrete
• /
• v.29 no.1
• /
• pp.47-57
• /
• 2022

The increase in waste tires has brought serious environmental problems. Using waste tires rubber particles as aggregate in concrete can reduce pollution and decrease the usage of natural aggregate. The paper describes an investigation on flexural bearing capacity of self-compacting concrete (SCC) pavement slabs containing crumb rubber. Cyclic loading tests with different stress ratios and loading frequencies are carried out on SCC pavement slabs containing crumb rubber. Based on Paris Law and test data, the fatigue life of SCC pavement slab containing crumb rubber is discussed, and a revised mathematical model is established to predict the fatigue life of SCC pavement slab containing crumb rubber. The model applies to different stress ratios and loading frequencies. The fatigue life of SCC pavement slab containing crumb rubber is affected by the stress ratio and loading frequency. The fatigue life increases with the increase of stress ratio and loading frequency. Real-time acoustic emission (AE) signals in the SCC pavement slab containing crumb rubber under cyclic loading are measured, and the characteristics of crack propagation in the SCC pavement slab containing crumb rubber under different stress ratios and loading frequencies are compared. The AE signals provide abundant information of fracture process zone and crack propagation. The variation of AE ringing count, energy and b-value show that the fracture process of SCC pavement slab containing crumb rubber is divided into three stages.

• Composites Research
• /
• v.19 no.4
• /
• pp.1-6
• /
• 2006

The effects of aging on fatigue of PSF/AS4 laminates tvas studied using the new energy release rate analysis. The analysis by the variational mechanics has been useful in providing fracture mechanics interpretation of matrix microcracking in cross-ply laminates. This paper describes the changes of the critical energy release rate ${\Delta}Gmc$(microcracking toughness) about the variation of the aging period during fatigue loading. The master plot by modified Pans-law gives a characterization of a material system's resistance to microcrack formation. PSF/AS4 $[0/902]_s$ laminates were aged at four different temperatures based on the glass transition temperature for 60 days. At all temperatures, the toughness decreased with aging time. The decrease of the toughness at higher temperature was faster than at lower temperature. To assess the effects of aging on fatigue, the unaged laminates were compared with the laminates which were aged for 60 days at $170^{\circ}C$ near $180^{\circ}C\;T_g$. The slope of dD/dN versus A 6u, of the aged laminates was lower than that of the unaged laminates. There was a significant shift of the aged data to formation of microcracks at the lower values of ${\Delta}G_m$.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.3
• /
• pp.59-75
• /
• 2024

This study was conducted to examine the domestic and foreign street tree creation and management system. This study examined the planning, creation, and management of street trees in Seoul, Korea, Lebanon, U.S.A, Yokohama, Japan, and Paris, France. Although the work system and perception of street trees differ depending on the national administration and cultural differences, major differences and characteristics could be examined. According to the research results, each country surveyed street trees through various methods and standards, and it was confirmed that an efficient work performance system was established with quantitative standards and devices to efficiently utilize them compared to Korea. There is a limitation in representing an entire country as only one local government was considered. In addition, since laws are revised and established according to changes and needs in society, it is necessary to conduct continuous research.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.1
• /
• pp.3-29
• /
• 2015

In case of C-410/11, Pedro Espada $S\acute{a}nchez$ and Others v Iberia $L\acute{i}neas$ $A\acute{e}reas$ de $Espa\tilde{n}a$ SA., ECLI:EU:C:2012:747, the passengers of a flight between Barcelona and Paris, whose baggage had been lost, lodged a claim before a Spanish court, asking for compensation. More specifically, the claimants were a family of four (two adults and two children), and had stored all their personal items in two suitcases, which had been checked in and tagged but never returned to the passengers in question. The four claimants relied on the Montreal Convention, ratified by the EU, which provides that each passenger can claim up to 1,000 SDRs in compensation (i.e. ${\euro}1,100$) in case his or her baggage is lost; thus, they sought to recover ${\euro}4,400$ (4,000 SDRs, i.e. 1,000 SDRs x4). The preliminary reference issue raised by the Spanish court to the CJEU regarded the $Montr\acute{e}al$ Convention's correct interpretation; in particular, it asked whether compensation should be available only to passengers whose lost baggage had been checked in "in their own name" or whether it is also available to passengers whose personal items had been stored in the (lost) baggage of a different passenger. The CJEU held that compensation had to be granted to all passengers whose items had been lost, regardless of whether these had been stored in baggage checked in "in their own name." In fact, it maintained that the real aim of the $Montr\acute{e}al$ convention is to provide passenger-consumers with protection for the loss of their personal belongings, so the circumstance of where these were being carried is not relevant. Nevertheless, the CJEU clarified that it is for national courts to assess the evidence regarding the actual loss of an item stored in another passenger's baggage, and maintained that the fact that a group of people were travelling together as a family is a factor that may be taken into account.