• Journal of Sericultural and Entomological Science
• /
• v.21 no.1
• /
• pp.36-44
• /
• 1979

Those studies were examined rearing two varieties on Japanese descent and two varieties of Chinese descent by feeding polluted mulberry leaves, non-polluted ones and water-cleaned ones respectively to find effects of air-pollution on the economic characters of silkworms and analysis of contents of Sulphur and Cadmium in the mulberry leaves and silkworms as followings; 1) Japanese descent of polluted part was delayed about 2.5 days than non-polluted part, Chinese descent was delayed about 4 days or inequal and water-cleaned part was medium in the silkworm larval duration. 2) Results of maximum weight of 5th instal, cocoon layer weight and cocoon weight were decreased in due order non-polluted, water-cleaned and polluted in the factors of mulberry 3) Pupal ratio of Japanese descent was not shown statistical significance, but Chinese descent was revealed it obviously in the factors of mulberry leaves. 4) In the resistance of polluted mulberry leaves, Chinese descent was feeble obviously than Japanese and there were some difference even through among the same varieties. 5) The content of S and Cd of polluted area mulberry leaves was increased about 30% respectively than non-polluted area. 6) The fed part of non-polluted mulberry leaves was S 0.41% and Cd 0.013 ppm water-cleaned part was S 0.47% and Cd 0.024 ppm and polluted part was S 0.52% and Cd 0.042 ppm in the contents of S and Cd of silkworm larvae. 7) The contents of S and Cd didn't make visible injury in mulberry leaves but made it seriously in silkworm larvae. 8) The injury of dust on mulberry leaves was more serious than that of quality of mulberry leaves by air-pollution in the economic characters of silkworm. 9) As above results, Chinese descent should avoid contaminated area and it rearing by water-cleaned mulberry leaves can get noticable results in inevitable case on selection of parents silkworm rearingzone.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.226-230
• /
• 2010

'Gwanghan' (Avena sativa L.), a winter oat for forage use, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2009. It was derived from a cross between 'Early80' and 'Gwiri23'. A parent, 'Early80', has early heading and high yielding, while Gwiri23 has mid-heading with large-size grain. Subsequent generations followed by the cross were handled in bulk and pedigree selection programs at Suwon and Yeoncheon, respectively. A line, 'SO96016-B-112-YB-12-7', was selected for earliness, cold tolerance, and good agronomic characteristics and designated as a line name of 'Gwiri64'. The line was subsequently evaluated for cold tolerance, earliness, and forage yield in four different locations, Yesan, Iksan, Kimjae, and Jeju, from 2007 to 2009, and finally named as 'Gwanghan'. Over 3 years, the average forage dry matter yield of 'Gwanghan' harvested at milk-ripe stage was $16.4MT\;ha^{-1}$, compared with $15.4MT\;ha^{-1}$ of check cultivar 'Samhan'. 'Gwanghan's' heading date is about 3 days earlier than that of check cultivar, and is adapted primarily for winter cultivation in the mid-southern regions of Korean peninsula.

• Korean Journal of Breeding Science
• /
• v.43 no.3
• /
• pp.210-213
• /
• 2011

A dark pink semi-double freesia (Freesia hybrida Hort.) 'Happy Birthday' was bred from a cross between 'Pink Jewel', F1 progeny of 'Michelle' and 'Rossini' as a female and 'White Lace' as a male parent. Test for the growth vigor and flowering characteristic were conducted from 2002 to 2007. A new variety 'Happy Birthday' has semi-double flower type with dark pink color (RHS color chart #RP66C). It has multiple flowers, distinctive flower shape, upright leaves and also stalks. The average yield of this variety 'Happy Birthday' counted over 6.7 stems per plant per season in the standard greenhouse cultivation method. It has also good production of cormlets, vigorous growth. A new variety 'Happy Birthday' is suitable for the greenhouse conditions during winter season in Korea.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.6
• /
• pp.27-38
• /
• 2018

The purpose of this study is to find out common investment decision factors for CVC's invested technology-based startups and analyze them. We examined 17 CVCs that invested in technology startups for three years and six months from 2015 to June 2018. As a result, the final 9 CVCs that can be used in this study were confirmed and 188 companies were analyzed. This study was conducted as a case study to propose and demonstrate CVC investment objectives and investment decision factors analysis model. The results of this study are as follows. First, CVC focused on strengthening investment. Second, In 2015, Invested in an average of 19 months of technology-based startups. In recent years, we invested in 36 months of proven technology-based startups. Thirdly, ICT service was the main business type of the invested startups. Fourth, the investors were concentrated on the stage of Series A~B. It is observed that CVC investment determinants have a significant impact on product or service and parent company relations. In addition, it was found that factors such as innovation, business planning competency, enterprising, strategic competency, leadership, and opportunity recognition competency were influential factors for the startups of invested companies and it was found that these factors are important for CVC investment decision. Understanding of CVC investment determinants presented in this study is based on the establishment of the investment process of the investee, entrepreneurship and management education program. The results of this study can be applied to the selection of excellent startups, entrepreneurship education programs, mentoring, development of coaching guidelines, and establishment of investment process of other investment institutions when investing in CVC.

• Therapeutic Science for Rehabilitation
• /
• v.12 no.3
• /
• pp.7-18
• /
• 2023

Objective : This study aimed to confirm the research characteristics by analyzing the literature that applied the school readiness programs for children with disabilities. Methods : Studies were collected from the PubMed, Embase, Web of Science, and Research Information Sharing Service databases. The key terms were "School readiness" AND ("Occupational Therapy" OR "Rehabilitation") in English and Korean. Total eight articles were selected through the selection and exclusion criteria. Results : The programs included multi-type training, motor skill training, parent training, and mobile application training. The providers were psychologists, occupational therapists, physical therapists, speech pathologists, community workers, educators, and the psychologists who conducted most of the research. The program factors can be classified into academic function, motor function, social function, parental training, and others. Academic and social functions accounted for the largest proportion of the respondents. The intervention improved multiple skills, literacy, parenting skills, and gross fine motor function. Conclusion : This study aimed to provide basic data for school-based occupational therapy by analyzing school readiness programs for children with disabilities. Recently, interest in and research on school readiness has increased. Occupational therapists should also establish their roles in the field of school-related rehabilitation and provide various school-based occupational therapies.

• Korean Journal of Poultry Science
• /
• v.7 no.1
• /
• pp.31-42
• /
• 1980

In order to identify the best superior cross combination of breeder stocks for broiler production, combining ability test and analyses of phenotypic performances for parent stocks were examined on records of 1,440 broiler chicken which were produced from 4 parental strains and 3 maternal strains at Hanhyup Poultry Breeding Farm from September 28, 1978 to January 5, 1979. The results obtained were as follows; 1. There was not found heterosis effect in viability but it seems to be desirable to select Hubbard strain in paternal line to improve viability. 2. As the paternal and maternal lines, selection of Ross strain showed the best paternal and maternal performance and the best general combining ability in body weight at 8 weeks of age is expected to be able to improve body weight of it s crossbred And the most superior cross combinations based on the specific combining ability and performance of rack crossbred were identified as Hubbard x Ross ana Ross x Hypeco crossbreds. 3. The best paternal and maternal lines on the smallest feed consumption for 8 weeks were Hubbard and Ross strains, and Hypeco strain, respectively. Especially Hubbard x Hypeco cross combination was proved as the smallest feed consumption compared with other cross combinations. 4. In feed requirement per Kg body weight increase, Hubbard strain for paternal line, Hypeco strain for naternal line, and cross combinations of Hubbard x Hypeco, Hubbard x Ross and Ross x Hypeco were certified as the most superiors. 5. Also superior cross combinations of Hubbard x Hypeco and Hubbard x Ross earned the most profit per bird through economic analysis. According to results as shown above, this experiment seems to be able to reach a such conclusion that production of superior cross combinations Hubbard x Ross, Hubbard x Hypeco and Ross x Hypeco through selection of Ross and Hubbard strains to paternal line and Hypeco and Ross strains for maternal line may become to considerable improvement for important economic characters of broiler; viability, body weight, feed consumption and feed requirement.

• Journal of Korean Society of Forest Science
• /
• v.14 no.1
• /
• pp.1-20
• /
• 1972

The trend and achievements of forest genetics research in abroad were investigated through observation tours and reference work and following facts were found to be important aspects which should be adopted in the forest genetics research program in Korea. Because of world wide recognization on the urgency of taking a measure to reserve some areas of the representative forest type on the globe before the extingtion of such forest type as the results of continuous exploitations of the natural forests to meet the timber demand all over the world, it is urgently needed to take a measure to reserve certain areas of natural stand of Pinus koraiensis, Pinus parviflora, Pinus densiflora f. erectra, Abies koreana, Quercus sp., Populus sp., etc. as gene pool to be used for the future program of forest tree improvement. And the genetic studies of those natural forest of economic tree species are also to be performed. 1. Increase of the number of selected tree for breeding purpose. Because of the fact that the number of plus tree at present is too small to carry out selection program for tree improvement, particularly for the formation of source population for recurrent selection of parent trees of the 2nd generation seed orchard it is to be strongly emphasized to increase the number of plus tree by alleviating selection criteria in order to enlarge the population size of plus trees to make the selection program more efficient. 2. Progeny testing More stress should be placed on carrying out progeny testing of selected trees with open pollinated seeds. And particular efforts are to be made for conducting studies on adult/juvenile correlation of important traits with a view to enable to predict adult performances with some traits revealed in juvenile age thus to save time for progeny testing. 3. Genotype-environment interaction Studies on genotype and environment interaction should be conducted in order to elucidate whether the plus trees selected on the good site express their superiority on the poor site or not and how the environment affect the genotype. And the justification of present classification of seed distribution area should be examined. 4. Seed orchard of broad leaf tree species. Due to the difficulty of accurate comparison of growth rate of neighbouring trees of broad leaf tree species in natural stand, it is recommended that for the improvement of broad leaf trees a seedling seed orchard is to be made by roguing the progeny test plantation planted densely with control pollinated seedlings of selected trees. 5. Breeding for insect resistant varieties. In the light of the fact that the resistant characteristics against insect such as pine gall midge (Thiecodiplosis japonensis U. et I.) and pine bark beetle (Myelophilus pinipera L.) are highly correlated with the amount and quality of resin which are known as gene controlled characteristics, breeding for insect resistance should be carried out. 6. Breeding for timber properties. With the tree species for pulp wood in particular, emphasis should be placed upon breeding for high specific gravity of timber. 7. Introduction of Cryptomeria and Japanese Cypress In the light of the fact that the major clones of Cryptomeria are originated from Yoshino source and are being planted up to considerably north and high elevation in Japan, those species should be examined on their cold resistance in Korea by planting them in further northern part of the country.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.2
• /
• pp.281-313
• /
• 1976

To obtain fundamental informations on cotton breeding efficiences for Korea, individual genetic relationships and interrelationships between the agronomic characteristics of Upland cotton were investigated. These experiments were couducted at the Mokpo Branch Station $(34^{\circ}48'N, $ $126^{\circ}23'E$ and altitude of 10m above sea level) from 1969 through 1972. Heterosis, combining ability, dominance and recessive gene action, genetic variance, and phenotypic and genotypic correlation were investigated by $F_1'S$ from an 11-parent partial diallel cross and the segregating $F_2$ and $F_3$ populations of the cross Paymaster times Heujueusseo Trice. The following points resulted from this study, 1. Heteroses for number of bolls per plant and lint yield were significant at 27, 84% and 37.26%, respectively. No other character had significant heteroses. 2. The GCA estimates for all studied characteristics were higher than the SCA estimates. Varieties with high GCA effects were Suwon 1 for earliness, Paymaster and Arijona for high lint percent, and Arijona for long fiber, etc, 3. SCA estimates for lint yield varied widely in crosses with Mokpo 4, Mokpo 6 and Heujueusseo Trice. Those crosses with the highest SCA effects were combinations with large characteristics differences, Example of these crosses are Mokpo 4 times Acala 1517W, Mokpo 4 times D. P. L. and Heujueusseo Trice aud Paymaster. 4. Early-maturing varieties were completely dominant to late-maturing varieties in some combinations while other crosses gave intermediate phenotypes. These results suggest additive genetic action by multi-genes. Heujueusseo Trice, Mokpo 6, and Suwon 1 showed highest degree of dominance for earliness. 5. There were no significant trends for inheritance of weight of boll and 100 seeds weight. 6. Long staple was partially to completely dominant to short staple. Though there were single gene ratios the rate of dominance decreased in the $F_2$ and $F_3$ populations in the cross between the long staple variety Paymaster and the short staple variety Heujueusseo Trice. Diallel cross $F_1$ hybrids showed complicated allelic gene action for staple length. Various dominance degree were shown by varieties. 7. Number of bolls per plant indicated strong over-dominance and small non-allelic additive gene action. 8. Lint Yield was characterized by over-dominance and by multiple non-allelic-gene action. High-yielding varieties were dominant to low-yielding ones. However, the low-yielding variety Heujueusseo Trice showed over-dominance, indicating different reactions according to the varieties and combinations. 9. Broad sense heritability for days to flowering was 34-39% while narrow sense heritability was 11%. Large variations of individual plants caused by Korean climatic conditions cause this situation. Heritability estimates for weight of boll was 30% for broad sense and 22% for narrow sense. 10. Heritability estimates for staple length and lint percent were very high suggesting strong selection effects. 11. Narrow sense heritability estimates for number of bolls per plant was 30% in the diallel cross $F_1$ hybrids and 36% in the $F_2$ population of the special cross. Broad sense heritability was estimated at 67% suggesting that. 12. Heritability estimates for lint yield was low due to high over-dominance in the diallel cross $F_1$ hybrids. Heritability estimates for yield was low in the $F_1$ hybrids but high in the $F_2$ and $F_3$ populations. 13. Phenotypic and genotypic correlations between lint percent and days to flowering and between staple length and days to flowering were high in the $F_1, $ $F_2$ and $F_3$ populations. Late-maturing varieties and individuals had long staple and high lint percent in general. As the correlation between days to flowering and lint yield was extremely low, the two traits were considered independent of each other. Days to flowering and number of bolls per plant were negatively correlated in the $F_3$ population, indicating early-maturing individual plants with many bolls may be readily selected. 14. Phenotypic and genotypic correlations between lint percent and staple length were high in $F_1, $ $F_2$ and $F_3$ populations. Accordingly, long staple varieties were high in lint percent. It was recognized that lint yield and lint percent were positively correlated in the diallel cross $F_1$ hybrids, and lint percent and staple length were positively correlated in the $F_2$ population, indicating that lint percent and staple length affect lint yield. 15. Lint yield was significantly and positively phenotypically correlated with number of bolls per plant in $F_1, $ $F_2$ and $F_3$ populations. A high genotypic correlation was also noted indicating a close genetic relationship. The selection efficiencies for a high-yielding variety can be increased when individual plants with many bolls are selected in later generations. The selection efficiencies for good fiber quality can be enhanced when individuals with long staple and high lint percent are selected in early generations.

• Journal of Korean Society of Forest Science
• /
• v.51 no.1
• /
• pp.22-35
• /
• 1981

This study was designed to know difference in degree of dehardening and rehardening respectively by artificial high and low temperature treatments among different clonal seedlings and seedlings from different seed sources of Cryptomeria japonica which have been grown under the cold areas in Japan and Korea. High temperature treatment was done with 15 to $20^{\circ}C$ under 100% relative humidity for one to nine days and low temperature treatment was carried with $-7^{\circ}C$ for one to three days. Occasionaly, high temperature treatment was combined and followed by low temperature treatment. The ability of stem section to delay dehardening by high temperature treatment and/or to hasten rehardening by low temperature treatment was used as an indicator of adaptability under extreme temperature fluctuation in nature. Clones and seedlings from different seed sources which showed greater freezing resistance than others after artificial high and/or low temperature treatments were selected over two to three time periods: early winter, mid winter and early spring in 1977 to 1980. These were Seoul #7, and #9, Namboo #3, and #4, Sung-Kang #11, Chung-Sam #8 and Huek-Suk #9. These selected seedlings might have survival advantage to withstand early and late frost damage, especially the critical frost damage of the basal stem, since it was known to be induced by lowering freezing resistance of the basal part when exposed to the high temperature near the ground during the day. Large variation in freezing resistance and degree of dehardening and rehardening was found among clonal or seed sources and among individuals within a seed source, but was not related to the difference in climatic conditions where the parent trees was selected. These indicated the possibility of future breeding work for more cold resistant family of Cryptomeria japonica.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.359-365
• /
• 2013

Estimate breeding value can be used as single trait animal model was developed directly using the Fortran language program. The program is based on data computed by using the indirect method repeatedly. The program develops a common algorithm and imprves efficiency. Algorithm efficiency was compared between the two programs. Estimated using the solution is easy to farm and brand the service, pedigree data base was associated with the development of an improved system. The existing program that uses the single trait animal model and the comparative analysis of efficiency is weak because the estimation of the solution and the conventional algorithm programmed through regular formulation involve many repetition; therefore, the newly developed algorithm was conducted to improve speed by reducing the repetition. Single trait animal model was used to analyze Gauss-Seidel iteration method, and the aforesaid two algorithms were compared thorough the mixed model equation which is used the most commonly in estimating the current breeding value by applying the procedures such as the preparation of information necessary for modelling, removal of duplicative data, verifying the parent information of based population in the pedigree data, and assigning sequential numbers, etc. The existing conventional algorithm is the method for reading and recording the data by utilizing the successive repetitive sentences, while new algorithm is the method for directly generating the left hand side for estimation based on effect. Two programs were developed to ensure the accurate evaluation. BLUPF90 and MTDFREML were compared using the estimated solution. In relation to the pearson and spearman correlation, the estimated breeding value correlation coefficients were highest among all traits over 99.5%. Depending on the breeding value of the high correlation in Model I and Model II, accurate evaluation can be found. The number of iteration to convergence was 2,568 in Model I and 1,038 in Model II. The speed of solving was 256.008 seconds in Model I and 235.729 seconds in Model II. Model II had a speed of approximately 10% more than Model I. Therefore, it is considered to be much more effective to analyze large data through the improved algorithm than the existing method. If the corresponding program is systemized and utilized for the consulting of farm and industrial services, it would make contribution to the early selection of individual, shorten the generation, and cultivation of superior groups, and help develop the Hanwoo industry further through the improvement of breeding value based enhancement, ultimately paving the way for the country to evolve into an advanced livestock country.