• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2786-2800
• /
• 1997

In this paper, we investigate how well the channel memory (statistical dependence in the occurrence of transmission errors) can be used in the evaluation of widely used error control schemes. For this we assume a special case named as the simplest Markovian block-error pattern with two states, in which each block is classified into two classes of whether the block transmission is in error or not. We apply the derived pattern to the performance evaluation of the practical link-level procedures, LAPB/D/M with multi-reject options, and investigate both throughput and user-perceived response time behaviors on the discrete-time domain to determine how much the performance of error recovery action is improved under burst error condition. Through numerical examples, we show that the simplest Markovian block-error pattern tends to be superior in throughput and delay characteristics to the random error case. Also, instead of mean alone, we propose a new measure of the response time specified as mean plus two standard deviations 50 as to consider user-perceived worst cases, and show that it results in much greater sensitivity to parameter variations than does mean alone.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.3
• /
• pp.25-41
• /
• 2012

The purpose of this study is to quantitatively analyze the social welfare value given to the designated rural settlement zone by the resident-participated site unit plan that the City of Cheongju is newly attempting to draft. Firstly, the costs and benefits from the site unit planning were estimated. Secondly, through literature review especially focussed on the benefit and cost estimation, on-site questionnaire was designed, and then sample residents of the qualifying sites were asked about their willingness to pay, which could make it possible to estimate the monetary value of its benefits by the contingent valuation method (CVM). Finally, the present value of net benefits (PVNB) was estimated through the derived costs and benefits. As a result of analysis, firstly, the present value of net benefits (PVNB) was found to be 7,641 billion won, which indicated that the implementation of district-unit plan would be able to cause sufficient social welfare value for the effected residents. Secondly, in examining the result of individual average amount for willingness to pay through the CVM, the area that benefited the most was found to be the road improvement. Thirdly, as a result of sensitivity analysis, the parameter with the most effects was the discount rate, which suggested that, in carrying out public projects, excessive market interest rates would not be appropriate.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.9
• /
• pp.72-80
• /
• 2009

When the magnet wheel rotates over a conducting plate, it generates the traction torque as well as the repulsive force on the conducting plate. Partially-cut traction torque results in the linear force into the tangential direction. To cut the traction torque, the concept of magnetic shield is introduced. The direction change of the linear force is realized varying the shielded area of magnetic field. That is, the tangential direction of non-shielded open area becomes the direction of the linear thrust force. Specially a shape of permanent magnets composing the magnet wheel leads to various pattern of magnetic forces. So, to enlarge the resulting force density and compensate its servo property a few simulations are performed under various conditions such as repeated pattern, pole number, radial width of permanent magnets, including shape of open area. The theoretical model of the magnet wheel is derived using air-gap field analysis of linear induction motor, compared with test result and the sensitivity analysis for its parameter change is performed using common tool; MAXWELL. Using two-axial wheel set-up, the tracking motion is tested for a copper plate with its normal motion constrained and its result is given. In conclusion, it is estimated that the magnet wheel using partial shield can be applied to a noncontact conveyance of the conducting plate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.2
• /
• pp.247-268
• /
• 2011

Due to the application-specific nature of wireless sensor networks, the sensitivity to such a requirement as data reporting interval varies according to the type of application. Such considerations require an application-specific, parameter tuning paradigm allowing us to maximize energy conservation prolonging the operational network lifetime. In this paper, we propose a reporting interval adaptive, sensor control platform for energy-saving data gathering in wireless sensor networks. The ultimate goal is to extend the network lifetime by providing sensors with high adaptability to application-dependent or time-varying, reporting interval requirements. The proposed sensor control platform is based upon a two phase clustering (TPC) scheme which constructs two types of links within each cluster - namely, direct link and relay link. The direct links are used for control and time-critical, sensed data forwarding while the relay links are used only for multi-hop data reporting. Sensors opportunistically use the energy-saving relay link depending on the user reporting, interval constraint. We present factors that should be considered in deciding the total number of relay links and how sensors are scheduled for sensed data forwarding within a cluster for a given reporting interval and link quality. Simulation and implementation studies demonstrate that the proposed sensor control platform can help individual sensors save a significant amount of energy in reporting data, particularly in dense sensor networks. Such saving can be realized by the adaptability of the sensor to the reporting interval requirements.

• Journal of Drive and Control
• /
• v.12 no.3
• /
• pp.52-59
• /
• 2015

An electro hydraulic poppet valve (EHPV) and a variable orifice poppet are assembled in a single block, which is referred to as a RHINO but is also generally called a pilot-operated flow control valve. In this study, we analyzed the structure and the operating principle for a RHINO applied in a 21-ton electric excavator system. The RHINO was experimentally tested to measure the dynamic responses and the pressure energy loss. In this test, we investigated the variation in the conductance coefficient according to the increase in the supply pressure under a constant current and a variation in the flow rate according to the increase in the current. Then, the geometrical shapes and the spring stiffness of the RHINO were considered to develop an analysis model. The characteristics (current-force and hysteresis) for the solenoid based on the experimental data were reflected in the analysis model that was developed, and the reliability of the analysis model was also verified by comparing the experimental and analytical results. The developed model is thus considered to be reliable for use in a wide range of applications, including optimum design, sensitivity analysis, parameter tuning, etc.

• Journal of Korea Water Resources Association
• /
• v.44 no.12
• /
• pp.941-954
• /
• 2011

In this study, past method and recent method for flood discharge with domestic multi-purpose dams in Korea were compared and analyzed with respect to the scale of watershed. Rainfall depth, temporal pattern, rainfall excess, rainfall-runoff model, parameter estimation and base flow were selected as the principal factors affecting flood discharge and effects on flood discharge were analyzed quantitatively by using sensitivity analysis. The results showed that the flood discharges calculated by past and recent method increased and decreased with a wide range of discharge with respect to the scale of watershed. The reason for decrease of flood discharge is the exchange of temporal pattern of rainfall and the principal reasons for increase of flood discharge are the increase of rainfall depth by unusual weather phenomena and the difference of estimation method for parameters of unit hydrograph.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.155-155
• /
• 2019

The Agricultural Policy/Environmental eXtender (APEX) models have been developed for assessing agricultural management efforts and their effects on soil and water at the field scale as well as more complex multi-subarea landscapes, whole farms, and watersheds. National Academy of Agricultural Sciences, Wanju, Korea, has modified a key component of APEX application, named APEX-Paddy for simulating water quality with considering appropriate paddy management practices, such as puddling and flood irrigation management. Calibration and validation are an anticipated step before any model application. Simple techniques are essential to assess whether or not a parameter should be adjusted for calibration. However, very few study has been done to evaluate the ability of APEX-Paddy to simulate the impact of multiple management scenarios on nutrients loss. In this study, the observation data from experimental fields at Iksan in South Kora was used in calibration and evaluation process during 2013-2015. The APEX auto- calibration tool (APEX-CUTE) was used for model calibration and sensitivity analysis. Four quantitative statistics, the coefficient of determination ($R^2$),Nash-Sutcliffe(NSE),percentbias(PBIAS)androotmeansquareerror(RMSE)were used in model evaluation. In this study, the hydrological process of the modified model, APEX-Paddy, is being calibrated and tested in predicting runoff discharge rate and nutrient yield. Field-scale calibration and validation processes are described with an emphasis on essential calibration parameters and direction regarding logical sequences of calibration steps. This study helps to understand the calibration and validation way is further provided for applications of APEX-Paddy at the field scales.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.106-106
• /
• 2019

많은 도심의 하천들은 오염물질의 유입에 취약하다. 최근 신소재 공학 등 첨단산업이 발전하게 되면서 유해화학물질의 유입문제는 더욱 대두되고 있으며, 실제로 최근 유해화학물질 유입사고 발생건수가 늘어나고 있다. 특히 국내 취수량의 90%는 지표수에서 취수하고 있어, 하천오염사고는 직접적인 피해로 이어지게 된다. 따라서 이러한 사고에 대응하기 위하여 수환경에 유입된 유해물질의 거동 매커니즘을 반영한 수질해석이 필요하다. 수체 내에 유입된 유해화학물질은 기본적으로 흐름에 따른 이송 확산을 하며 흡 탈착, 휘발, 침전 부유, 생화학 반응과 같은 다양한 반응과 함께 혼합거동을 한다. 특히 소수성물질의 경우 용해된 상태뿐만 아니라, 유사에 흡착된 상태로 수체에 존재하게 된다. 결국 유해화학물질의 거동을 해석하기 위해서는 유체의 흐름 해석뿐만 아니라 수체에 존재하는 유사의 이송 또한 해석해야한다. 본 연구에서는 흐름해석을 위하여 서울대에서 개발한 흐름모형(HDM-2D)을 사용하였으며, 부유사 거동모의를 위해 부유사거동모형(STM-2D)을 개발하였다. 또한 유해화학물질의 거동모의를 위해 서울대에서 개발한 수질모형(CTM-2D)에 생성/소멸항을 추가하였으며 흐름모형과 부유사모형과의 연계를 통해 유해화학물질의 혼합거동 수치모형을 개발하였다. 각 반응항(흡 탈착, 휘발, 침전 부유, 생화학 반응)을 수치모형에 반영 시에는 보통 두 계(물-토양, 물-공기) 사이의 선형 물질교환으로 이해된다. 따라서 물질의 각 반응 별 평형농도와 물질교환속도계수를 추정식을 통해 산정하여 사용하게 된다. 하지만 각 기작이 반영유무에 따라 계산시간 및 필요입력변수가 늘어나게 되므로, 유해화학물질 유입사고와 같은 빠른 대처가 필요한 경우 각 반응 텀의 유의성을 판단하여 모형에 반영여부를 결정을 통해 경제적인 모의를 할 수 있어야 한다. 이에 따라 본 연구에서는 개발된 모형의 각 매개변수들의 민감도를 분석하고, 흐름조건 및 물질의 특성에 따른 반응항의 유의성을 판단하였다. 본 연구에서는 개발된 모형(부유사거동모형, 유해화학물질의 혼합거동모형)은 해석해 및 현장 데이터와 비교검증을 통해 개발을 완료하였으며, 각 반응항의 민감도 분석을 통해 매개변수의 임계값을 결정하였다.

• Computers and Concrete
• /
• v.10 no.3
• /
• pp.277-294
• /
• 2012

The aim of the study is to determine the modal parameters of a prototype damaged arch dam by operational modal analysis (OMA) method for some damage scenarios. For this purpose, a prototype arch dam-reservoir-foundation model is constructed under laboratory conditions. Ambient vibration tests on the arch dam model are performed to identify the modal parameters such as natural frequency, mode shape and damping ratio. The tests are conducted for four test-case scenarios: an undamaged dam with empty reservoir, two different damaged dams with empty reservoirs, and a damaged dam with full reservoir. Loading simulating random impact effects is applied on the dam to crack. Cracks and fractures occurred at the middle of the upper part of the dams and distributed through the abutments. Sensitivity accelerometers are placed on the dams' crests to collect signals for measurements. Operational modal analysis software processes the signals collected from the ambient vibration tests, and enhanced frequency domain decomposition and stochastic subspace identification techniques are used to estimate modal parameters of the dams. The modal parameters are obtained to establish a basis for comparison of the results of two techniques for each damage case. Results show that approximately 35-40% difference exists between the natural frequencies obtained from Case 1 and Case 4. The natural frequencies of the dam considerably decrease with increasing cracks. However, observation shows that the filled reservoir slightly affected modal parameters of the dam after severe cracking. The mode shapes obtained are symmetrical and anti-symmetrical. Apparently, mode shapes in Case 1 represent the probable responses of arch dams more accurately. Also, damping ratio show an increase when cracking increases.

• Transactions of Materials Processing
• /
• v.31 no.6
• /
• pp.376-383
• /
• 2022

The potential damage region of a WC-Co cemented carbide die is investigated for cold forging process of a wheel-nut by numerical simulation with its chemical composition considered. Numerical simulation is utilized to calculate internal stress, especially for the WC-Co die, during the forging process. Finite element model is established, in which the elasto-plastic properties are applied to the work-piece of bulk steel, and elastic properties are considered for the lower die insert of the WC-Co alloy. This stress analysis enables to distinguish the potential damage regions of the WC-Co die. The regions from calculation are comparatively analyzed along with the crack area observed in the die after repetitive manufacturing. Effect of chemical composition of the WC-Co is also evaluated on characteristics of potential damage region of the die with variance of mechanical properties considered. Derived from Mohr-Coulomb fracture model, furthermore, a new stress index is presented and used for die stress analysis. This index inherently considers hydrostatic pressure and is then capable of deducing wide range of its distribution for representing stress state by modification of its parameter implying pressure sensitivity.