• 제목/요약/키워드: paper sludge

검색결과 400건 처리시간 0.027초

제지슬러지를 이용한 인공상토가 토마토와 오이 플러그묘의 생육에 미치는 영향 (Growth Responses of Tomato and Cucumber Plug-seedlings Grown for the Paper-sludge Substrates)

  • 정성우;차선화;송대빈;허무룡
    • 농업생명과학연구
    • /
    • 제44권6호
    • /
    • pp.9-14
    • /
    • 2010
  • 본 시험은 폐기되고 있는 제지슬러지의 자원 재활용을 위한 육묘용 상토로서 이용 가능성을 알아보기 위해 수행되었다. 상업 용토 토실이를 대조구로 하여 제지슬러지와 토실이의 혼합 상토 (1:1, v:v), 그리고 제지 슬러지 단용 상토를 처리로 하였다. 토마토의 육묘 결과, 제지슬러지 혼합 상토에서의 생육은 토실이 상토와 비교하여 초장, 근장, 생체중과 건물중 등에서 그 차이 없었다. 반면, 제지슬러지 단용 상토에서의 생육은 현저히 억제되는 것으로 나타났다. 이러한 결과는 오이묘의 생육결과에서도 반영 되어 제지슬러지 단용 상토의 오이묘 생육은 현저히 억제되었다. 본 시험의 결과, 제지슬러지의 자원 재활용을 높이기 위해서는 미 가공 제지슬러지의 높은 pH와 EC의 안정화, 그리고 Zn의 함량을 낮추는 등의 처리가 선행 되어야 할 것으로 판단된다.

상토 및 육묘 포트의 개발을 위한 제지 슬러지의 이용 (제1보) - 제지 슬러지의 물리.화학적 분석 - (Utilization of Paper Sludges for Developing Bed Soils and Seedling Pots (I) - Physico-chemical analysis of paper sludges -)

  • 김철환;김경윤;신태기;정호경;이영민;송대빈;허무룡
    • 펄프종이기술
    • /
    • 제39권4호
    • /
    • pp.61-67
    • /
    • 2007
  • Paper sludges collected from three different paper mills were physico-chemically analyzed in order to use them as raw materials for making bed soils and seedling pots. The sludge from a fine paper mill contained lots of inorganic pigment particles used for coating, as those from a newsprint mill and a tissue mill had not. It was clearly through XRD analysis confirmed that all sludges included calcium carbonate. The paper sludge from the tissue mill contained the greatest amount of particles, which would contribute to water absorption and nutrient storage. The sludge from the fine paper mill had the highest density due to many inorganic elements. While the ash content and the total nitrogen content were the highest in the sludge from the fine paper mill, the C/N ratio was the lowest in the fine paper mill sludge. All sludges seemed to have insufficient contents of potassium. The sludges from the newsprint mill and the tissue mill showed more silicon contents than that from the fine paper mill. It was concluded that the sludge from the fine paper mill would be able to be the most efficient raw materials for making bed soils and seedling pots and the other two sludges would be more efficient for intensive culture for crops such as rice and grain with additional supplement of nitrogen and other nutrients.

골심지 제조를 위한 감귤 착즙 슬러지의 적용성 평가 (A Study on Applicability of Citrus Sludge for the Manufacture of Corrugated Medium)

  • 이태주;김형진;이창용
    • 펄프종이기술
    • /
    • 제42권5호
    • /
    • pp.47-53
    • /
    • 2010
  • It is important to utilize the citrus sludge in terms of the reuse of waste materials in the manufacture of corrugated medium. Especially, the mandarin industry occupies the first place in Jeju province. In this paper, the application of citrus sludge mixed with KOCC recycled fibers into the manufacture of corrugated medium was studied. The citrus sludge was acidic in pH value. Also, the constituents of citrus sludge contain some short fibers, fines, and mucus which contain flavonoids, pectins and so on. In papermaking application, these components cause some troubles like foams, bad smell, fouling on the paper machine, and bad drainage and web breaks of wet web. The strength properties of handsheets prepared from KOCC and citrus sludge was decreased, compare to handsheets made of only KOCC. To compensate the problems on strength properties, some kinds of additives were tried to apply into papermaking wet-end system in laboratory scale. As a result, mixing conditions of alum, starch and anionic additives showed the best options in the recovery of strength properties and formations of corrugated medium.

제지(製紙)슬러지와 슬러지 시용토양중(施用土壤中)의 유해성분(有害性分)에 관하여 (On the Harzadous Components of Paper Mill Sludge and Sludge Treated Soil)

  • 이규승;최종우;조정례;김문규
    • 농업과학연구
    • /
    • 제19권2호
    • /
    • pp.194-200
    • /
    • 1992
  • 제지슬러지를 퇴비(堆肥) 등 유기물자원(有機物資源)으로이용하기 위하여 44점의(點) 제지슬러지를 제지회사에서 직접 채취하여 슬러지 중의 중금속 성분과 $PCB_s$ 함량을 조사하였고, 아울러 Kraft지슬러지와 판지(板紙)슬러지를 이용한 농가포장(農家圃場) 토양중의 중금속함량을 무시용(無施用) 토양과 비교하여 보았으며 중요한 결과는 아래와 같다. 1. 슬러지 중에서는 납이 평균(平均) 14.5-25.7ppm으로 비교적 높은 함량을 보였으며, Al, Cd, Cu, Fe, 및 Zn 등은 일반토양중 함량과 비교하여 큰 문제가 없는 수준이었으며, Cr과 Hg은 검출(檢出)되지 않았다. 2. Kraft지, 판지(板紙), 신문용지(新聞用紙)슬러지 중의 $PCB_s$ 함량을 조사해 본 결과, kraft지와(紙) 판지(板紙) 슬러지에서는 10ppb 이하로서 거의 무시할 수준이었으며, 신문용지 슬러지에는 다소간 존재하였으나 $PCB_s$ 총량(總量)을 정량하지는 못하였다. 3. 제지슬러지 시용토양중의 금속성분함량은 무처리토양과 비교하여 유의성있는 증가 양상을 보이지 않았으며, 전반적인 함량은 토양중 평균함량범위 이내였다. 4. 이상의 결과로 보아 제지슬러지의 토양환원은 현단계에서 부작용을 일으킬 우려가 없다고 평가할 수 있다.

  • PDF

마이크로웨이브와 열전매체유를 이용한 슬러지 건조방법 (Sludge Drying Method Using Microwave Drying Device and Heat Transfer Medium Oil)

  • 김용렬;손민일
    • 한국응용과학기술학회지
    • /
    • 제28권3호
    • /
    • pp.367-373
    • /
    • 2011
  • This research is a basic researching process for producing solid fuel that mixing paper sludge and Heat Transfer Medium Oil. Under the presence of Heat Transfer Medium Oil, paper sludge is heated and dried with home appliance microwave for comparing drying efficiency and energy efficiency of different types of drying method. As a result, Heat Transfer Medium Oil and paper mixing case of drying method, OMD, is the most efficient way to shorten the time for evaporating moisture in the paper sludge. In addition, heat transfer effect and density is increased with adding Heat Transfer Medium Oil by microwave. Future more, OMD's energy cost for evaporating whole moisture is 78% cheaper than MD. Also, OMD process shows the best energy efficiency with comparing other process. Evaporation rate of paper sludge evaporation process with microwave is 11.66% increased by adding Heat Transfer Medium Oil 150g. Preheating Heat Transfer Medium Oil or improving different ways injecting Heat Transfer Medium Oil is a good way to increase a rate of initiative moisture evaporation process.

제지(製紙) 슬러지 소각재(燒却滓)를 활용(活用)한 섬유보강(纖維補强)콘크리트의 균열(龜裂) 억제(抑制) 효과(效果) (Effect on the Crack Resistance of Fiber Reinforced Concrete using Incinerated Paper Mill Sludge Ash)

  • 김남욱
    • 자원리싸이클링
    • /
    • 제17권4호
    • /
    • pp.10-20
    • /
    • 2008
  • 본 연구는 아직까지 활용실적이 적은 제지슬러지소각재를 대량으로 활용할 수 있는 방법을 도출하기 위하여 제지슬러지소각재를 시멘트의 대체재로 사용하고자 하였다. 또한 제지슬러지소각재 대체 시 나타나는 단점인 수화열 및 흡수율의 증가로 인한 수축균열을 폴리프로필렌섬유 및 셀룰로오스섬유를 혼입하여 이에 대한 제어효과를 고찰하여 제지슬러지소각재의 시멘트 대체재로써의 활용가능성을 규명하였다.

하수슬러지가 줄지렁이(Eisenia fetida)의 산란 및 부화율에 미치는 영향 (Effects of sewage sludge on the cocoon production and its hatchability of tiger worm(Eisenia fetida))

  • 박광일;배윤환
    • 유기물자원화
    • /
    • 제12권4호
    • /
    • pp.105-111
    • /
    • 2004
  • 환대 발생 직후의 줄지렁이에 제지슬러지, 농공지역(연천), 농업지역(남해)의 하수슬러지를 급이하였을 때, 104일 동안 줄지렁이가 생산한 난포수는 제지슬러지, 농업지역, 농공지역 순으로 각각 11.8, 8.6, 3.5개/마리였다. 그리고 제지슬러지를 급이한 경우는 조사기간동안 꾸준한 산란수를 유지하였으나 농공지역 하수슬러지를 급이한 지렁이는 먹이급이 52일 경과 후, 농업지역 하수슬러지는 먹이 급이 95일후부터 난포를 생산하지 못하였다. 환대 발생 직후의 줄지렁이에 농공지역(연천), 농업지역(남해)의 하수슬러지 및 제지슬러지를 급이하여 산란된 난포의 부화율은 각각 42.8, 38.3, 39.2%로 차이가 없었다. 그러나 연천하수슬러지와 남해하수슬러지를 급이한 경우 먹이 급이 46일, 43일 이후에 생산된 난포에서는 전혀 부화가 이루어지지 않았다. 부화기간은 33.8~36.0일로 먹이에 따른 차이는 없었다. 하수슬러지 및 제지슬러지를 급이한 후 생산된 난포에서 부화된 유충에 계속하여 하수슬러지 및 제지슬러지를 급이하였을 때, 먹이 급이 60일경과 후 지렁이의 치사율이 제지슬러지에서는 16%, 농업지역 하수슬러지에서는 90%, 농공지역 하수슬러지에서는 100%를 나타내었다.

  • PDF

고로슬래그와 폴리실리콘 슬러지를 활용한 경량복합패널 심재의 제지애시 첨가율에 따른 밀도 및 강도특성 (Density and Strength Properties according to the Paper Ash addition ratio of the Lightweight Composite Panel Core Using the Blast Furnace Slag and Polysilicon Sludge)

  • 임정근;이지환;박희곤;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2015년도 춘계 학술논문 발표대회
    • /
    • pp.152-153
    • /
    • 2015
  • Recently, solar energy generation is one of the fastest growing industries for eco-friendly energy. Every year, solar energy generation industry grows to 42% on average. However, polysilicon sludge is generated from processing of polysilicon but, there is nothing to handle that. Therefore, we need research to recycle polysilicon sludge. Also, improved fire resistance efficiency of wall is required according to reinforced fire safety standards due to many cases of big fires in our country. This study focuses on density and strength properties according to the addition ratio of paper Ash for the lightweight composite panel core with polysilicon sludge. As a result of the test, adding paper ash 9% has the best density and strength properties.

  • PDF

소성온도에 따른 제지공정 슬러지의 중금속 용출특성 연구 (Heavy Metal Leaching Characteristics of Sludge from Paper Mill Process with Sintering Temperature)

  • 박준석;고재철;김승호;박영구;전제열
    • 한국응용과학기술학회지
    • /
    • 제26권1호
    • /
    • pp.80-86
    • /
    • 2009
  • This research was performed to evaluate heavy metal leaching characteristics of the sludge from paper mill process with sintering temperature. Heavy metal leaching of the sludge was characterized with Korean Leaching Test and Toxicity Characteristic Leaching Procedure. The test sludge was composed of 70.72% of moisture, 9.5% of volatile solids and 9.76% of fixed solids. As a result of XRF analysis, Fe was the highest inorganic element in approximately 83%, which implies the recycling possibility of the sludge in reuse of Fenton chemicals and artificial lightweight aggregate. Leaching of heavy metals from sintered sludge was lower than the dry ones. However, there was no significant difference in leaching characteristics between the sludges sintered at $350^{\circ}C$ and $650^{\circ}C$. Zn and Fe were leached more greatly in TCLP and KLT methods respectively.

팽화 슬러지의 침전에 미치는 슬러지 성상의 영향 (Effect of Sludge Characteristics on the Sedimentation of Bulking Sludge)

  • 김동석;박영식
    • 한국환경과학회지
    • /
    • 제15권12호
    • /
    • pp.1177-1183
    • /
    • 2006
  • This study was carried out to evaluate effect of sludge characteristics (pH, SVI, anaerobic storage, wet density and growth phase) on the sedimentation of bulking sludge of paper manufacturing plant. The results showed that mix hulking sludge with sewage sludge (10-60%) caused the decrease of SVI, the settled sludge concentration was increased. Increase of anaerobic storage time (0 to 8 day) was increased SVI, sedimentation performance was deteriorated. The sedimentation was improved by addition of loess (0.2-5.0 g/L), because wet density of sludge was increased and SVI was decreased. At an exponential phase, the ratio of sedimented/growthed sludge concentration was decreased, the ratio was increased after stationary phase.