• 산업경영시스템학회지
• /
• 제16권27호
• /
• pp.73-82
• /
• 1993

In this paper, We determine the expected travel time for several forks Storage/Retrieval machine which is allowed multiple stops in aisle. When throughput is increased, We propose adding to fork number of each S/R machine rather than adding to number of S/R machine, We also describe such a model which determines the optimal number of each several forks S/R machine subject to constraints on the hourly throughput and warehouse dimensions. Numerical example is presented to compare warehouse shapes against each single fork, twin forks, triple forks S/R machine for various throughput values.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.139-142
• /
• 1999

Recently, the application of the linear machine for industrial field is remarkable increased, especially for the gantry machine and machine tool system. In these application, high precise position control performance is essentially required in steady/transient state. This paper presents the generalized PID position control algorithm which have rare sensitivity to mass and disturbance. Through the experimental results, it is shown that the proposed algorithm have good performance for the linear machine drives in the steady state and transient state in spite of the load mass varing.

• Journal of the Korean Data and Information Science Society
• /
• 제18권4호
• /
• pp.847-857
• /
• 2007

This paper provides a statistical algorithm which detects COD (chemical oxygen demand) measurement machine error on real-time. For this we propose to use regression model fitting and check its validity against the current observations. The main idea is that the normal regression relation between COD measurement and other parameters inside the machine will be violated when the machine is out of order.

• 산업경영시스템학회지
• /
• 제19권37호
• /
• pp.1-7
• /
• 1996

The grouping of parts into families and machines into cells poses an important problem for the improvement of productivity and quality in the design and planning of the flexible manufacturing system(FMS). This paper proposes a new algorithm of forming machine-part groups in case of the bottleneck machine problem and shows the numerical example. This algorithm could be applied to the large scale machine-part grouping problem.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1154-1160
• /
• 2000

This paper reports the development of a special impact fatigue test machine for high pressure vessels. The targeted vessels are subjected to shock pressures equivalent of explosions. This severe loading condition brings many difficulties to the design of test machine. Unfortunately, there are very rare such test machine in the world, and more worse, the machine is not opened and sold.

• Journal of the Korean Statistical Society
• /
• 제36권3호
• /
• pp.367-372
• /
• 2007

Classification as a tool to extract information from data plays an important role in science and engineering. Among various classification methodologies, support vector machine has recently seen significant developments. The central problem this paper addresses is the accuracy of support vector machine. In particular, we are interested in the situations where fast rates of convergence to the Bayes risk can be achieved by support vector machine. Through learning examples, we illustrate that support vector machine may yield fast rates if the space spanned by an adopted kernel is sufficiently large.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.102-105
• /
• 1995

In power system stability analysis, modelling of the synchronous machine is necessary and vary important. In this paper, a synchronous machine is modeled and simulated by using Object-Oriented method. The mathematical equations describing the dynamic behavior of the synchronous machine is represented by block diagram and Objected-Oriented Digital Computer Simulater(ODCS). The developed method is tested for a one-machine-to-infinite-bus system, which is accurate and very useful for a multi-machine system simulation.

• 대한안전경영과학회지
• /
• 제6권3호
• /
• pp.27-40
• /
• 2004

There are much dangerous machine in worksite. These make the rate of accidents increase. Specially, among them, the Press work has the highest rate of accidents. Therefore, it has been managed by Industrial safety-health law. It is very important to make a special study of work using the dangerous machine. In press work, it is also important to develop safety system program to improve productivity and work safely, In this reaserch, the safety management system is built for the work improvement of the Press. This paper showed method about dangerous machine.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.365-369
• /
• 2002

This paper introduces that the machine tools's feed system optimizes by modeling for simulation and adjusting drive control parameter. The first method is frequency response of speed loop with design parameter by use of MATLAB application, in order that other axis can do equal to bandwidth. The second meted uses various sensor for analyzing machine tools's structure and adjustes jirk limitter.

• 제어로봇시스템학회논문지
• /
• 제3권3호
• /
• pp.305-310
• /
• 1997

In this paper, a fuzzy set based machine-cell formation algorithm for cellular manufacturing is presented. The fuzzy logic is emoloyed to express the degree of appropriateness when alternative machines are specified to process a part shape. For machine grouping, the similarity coefficient based approach is used. The algorithm produces efficient machine cells and part families which maximize the similarity values.