• Journal of Auto-vehicle Safety Association
• /
• v.8 no.3
• /
• pp.28-32
• /
• 2016

Braking system is directly related to the safety of a vehicle and the brake discs are essential part of the braking system. Due to the repeated frictional forces and torque during braking, brake discs are always works at high temperature and high pressure. Furthermore, the brake disc is one of major tuning components in aftermarket, the braking performance of the brake disc should be evaluated for establishing the certification standards of tuning components. This paper proposes the test method to evaluate the performance of tuning brake discs.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.5
• /
• pp.558-563
• /
• 2008

Vibration/shock affects biggest taking a train subtraction of vehicle and durability decline. Therefore, absorber is used for vibration/shock isolation and various qualities of the material and design are applied to isolation. This paper proposes vibration/shock absorber that applies 'Disc' spring. Through comparison with 'Disc' spring that has nonlinearity and coil spring that is having linearity, see effect that nonlinearity of isolation gets in vibration/shock Isolation. Coil spring and 'Disc' spring are non-linear numerical analysis and simulation through theory for this, get and investigate comparison result through an experiment finally. Expressed and formulated shock through 'Runge-Kutta' method/impact response to nonlinear-vibration-equation of 1 degree of freedom for numerical analysis. Double half sine pulse of excitation used and analyzed result through spectrum response analysis here. Response of disc spring is compared to response of coil spring by changing $h_o/t$ ratio with computer simulation and the usage of disc spring is increased through analysis of effect of design factors. The purpose of this paper is that the shock response of disc spring is calculated through numerical simulation and to design the optimal absorber under the limited condition. And then, the isolation effect was analyzed through the shock test.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.990-993
• /
• 2008

Vibration/shock affects biggest taking a train subtraction of vehicle and durability decline. Therefore, absorber is used for vibration/shock isolation and various qualities of the material and design are applied to isolation. This paper proposes vibration/shock absorber that applies 'Disc'spring. Through comparison with 'Disc' spring that has nonlinearity and coil spring that is having linearity, see effect that nonlinearity of isolation gets in vibration/shock isolation. Coil spring and 'Disc' spring are non-linear numerical analysis and simulation through theory for this, get and investigate comparison result through an experiment finally. Expressed and formulated shock through 'Runge-Kutta' method/impact response to nonlinear-vibration-equation of 1 degree of freedom for numerical analysis. Double half sine pulse of excitation used and analyzed result through spectrum response analysis here. Response of disc spring is compared to response of coil spring by changing ho/t ratio with computer simulation and the usage of disc spring is increased through analysis of effect of design factors. The purpose of this paper is that the shock response of disc spring is calculated through numerical simulation and to design the optimal absorber under the limited condition. And then, the isolation effect was analyzed through the shock test.

• Smart Structures and Systems
• /
• v.22 no.6
• /
• pp.675-687
• /
• 2018

In the previous studies on the porous rock strength the effect of pore number and its diameter is not explicitly defined. In this paper crack initiation, propagation and coalescence in Brazilian model disc containing a single cylindrical hole and or multiple holes have been studied numerically using PFC3D. In model with internal hole, the ratio of hole diameter to model diameter was varied between 0.03, 0.17, 0.25, 0.33, and 0.42. In model with multiple hole number of holes was different in various model, i.e., one hole, two holes, three holes, four holes, five holes, six holes, seven holes, eight holes and nine holes. Diameter of these holes was 5 mm, 10 mm and 12 mm. The pre-holed Brazilian discs are numerically tested under Brazilian test. The breakage load in the ring type disc specimens containing an internal hole with varying diameters is measured. The mechanism of cracks propagation in the wall of the ring type specimens is also studied. In the case of multi-hole Brazilian disc, the cracks propagation and b cracks coalescence are also investigated. The results shows that breaking of the pre-holed disc specimens is due to the propagation of radially induced tensile cracks initiated from the surface of the central hole and propagating toward the direction of diametrical loading. In the case of disc specimens with multiple holes, the cracks propagation and cracks coalescence may occur simultaneously in the breaking process of model under diametrical compressive loading. Finally the results shows that the failure stress and crack initiation stress decreases by increasing the hole diameter. Also, the failure stress decreases by increasing the number of hole which mobilized in failure. The results of these simulations were comprised with other experimental and numerical test results. It has been shown that the numerical and experimental results are in good agreement with each other.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.599-604
• /
• 2000

Excessive vibration magnitude results in serious damage and economic losses in the turbine and generator system. Therefore, it is of importance to evaluate the accurate dynamic characteristics of the system in advance. In this paper, rotordynamic characteristics of both the shrunk-fit disc and welded drum rotors have been investigated to ensure an excellent running behavior of the system in which low-pressure(LP) turbines of a nuclear power plant were retrofitted to improve thermal efficiency and reliability. Analysis shows that the welded drum rotor has good torsional characteristics rather than the shrunk-fit disc rotor. In addition, verification testing of field test was performed to confirm the retrofit. Test results are good agreement with analysis ones.

• Smart Structures and Systems
• /
• v.22 no.6
• /
• pp.643-662
• /
• 2018

One of the methods for investigation of mechanical behavior of materials is numerical simulation. For simulation, its need to model behavior is close to real condition. PFC is one of the rock mechanics software that needs calibration for models simulation. The calibration was performed based on simulation of unconfined compression test and Brazilian test. Indeed the micro parameter of models change so that the UCS and Brazilian test results in numerical simulation be close to experimental one. In this paper, the effect of four micro parameters has been investigated on the uniaxial compression test and Brazilian test. These micro parameters are friction angle, Accumulation factor, expansion coefficient and disc distance. The results show that these micro parameters affect the failure pattern in UCS and Brazilian test. Also compressive strength and tensile strength are controlled by failure pattern.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.28-34
• /
• 1998

Powder metallurgy processes are able to form Net-Shape products and have been widely used in the production of automobile parts to improve its productivity. However, because of pores in powder products, the toughness of powder products are generally poor. Therefore, forged products are used in parts which suffer severe fatigue loads. In this paper, the choice of powder materials and production processes such as mixing, compaction, sintering, heat treatment to produce automobile spline hub are studied. Three type of materials are selected and processed and its microstructure and properties are investigated by tensile test, compression ring test, and impact test. Materials and processing methods are selected from the results. Finally, experimental spline hubs are manufactured by selected processes from selected powders and proved by torsional durability test.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.177-182
• /
• 2004

Electronic products are subjected to many different types of shock environment. As the Optical Disc Drive (ODD) market grows, the number of failures related to shock increases. Therefore, it is necessary to improve the performance of cushion package as well as the product design. Cushion materials such as expanded polystyrene are often used to protect electronic products from shock environment. In this paper, the drop analysis of the cushion package f3r optical disc drives was carried out with the explicit method of LS-DYNA and verified by the drop test. For the optimization of package, response surface approximation model was created using central composite design. As a result, cushioning performance was improved under the critical condition and practical design guidelines of cushion package were suggested.

• Korean journal of food and cookery science
• /
• v.27 no.4
• /
• pp.17-26
• /
• 2011

This study was performed to analyze the antibacterial activity against food hazardous microorganisms and antimutagenic effects of Sanguisorba officinalis L. ethanol extracts on Salmonella Typhimurium TA100. The antibacterial activity was evaluated by paper disc diffusion assay, minimum inhibition concentration (MIC), and optical density of the culture with the ethanol extract for 24 hr. Antibacterial activity was tested with seven microorganisms including Escherichia coli, Escherichia coli O157:H7, Pseudomonas aeruginosa, Salmonella Typhimurium, Listeria monocytogenes, Bacillus cereus, and Staphylococcus aureus. The paper disc diffusion assay showed distinct clear inhibition zones around the discs treated with the extract for five microorganisms, except Escherichia coli and Escherichia coli O157:H7. MIC values were 0.625-2.5 mg/mL for these five strains that showed clear zones. The time-kill assay was consistent with the results from the paper disc diffusion assay and MIC test. Additionally, antimutagenicity of the extract was determined using the Ames test. The ethanol extract at 5 mg/plate inhibited 72.42% and 89.85% of mutagenicity induced by 4-nitroquinoline 1-oxide and sodium azide, respectively. These results demonstrate that the ethanol extract from S. officinalis L. has remarkable antibacterial activity and antimutagenicity.

• Proceedings of the Korean Society of Veterinary Service Conference
• /
• 1994.04a
• /
• pp.140.2-140
• /
• 1994