• 한국재료학회지
• /
• 제15권9호
• /
• pp.589-593
• /
• 2005

Nanoimprinting lithography (NIL) is known as a suitable technique for fabricating nano and micro structures of high definition. Hot embossing is one of NIL techniques and can imprint on thin films and bulk polymers. Key issues of hot embossing are time and expense needed to produce a stamp withstanding a high temperature and pressure. Fabrication of a metal stamp such as an electroplated nickel is cost intensive and time consuming. A ceramic stamp made by silicon is easy to break when the pressure is applied. In this paper, a plastic stamp using a high temperature epoxy was fabricated and tested. The plastic stamp was relatively inexpensive, rapid to produce and durable enough to withstanding multiple hot embossing cycles. The merits of low viscosity epoxy solutions were a fast degassing and a rapid filling the microstructures. The hot embossing process with plastic stamp was performed on PMMA substrates. The hot embossing was conducted at 12.6 bar, $120^{\circ}C$ and 10 minutes. An imprinted PMMA wafer was almost same value of the plastic stamp after 10 times embossing. Entire fabrication process from silicon master to plastic stamp was completed within 12 hours.

• 한국항행학회논문지
• /
• 제17권5호
• /
• pp.524-544
• /
• 2013

본 연구에서는 영구 자석형 동기전동기(PMSM)를 축소형의 견인시스템으로 각 전동기를 개별로 제어하는 1C1M방식으로 구축하였다. 전동기를 제동할 때 발생한 회생전력은 모두 활용하고 있으며 전기제동의 사용영역 확대에 발생한 회생전력을 모두 흡수할 수 있는 능력을 가진 가선이라고 가정한다. 영구 자석형 동기전동기(PMSM)의 제동력 확보를 위해 벡터제어 방법과 제어기와 속도 센서를 마미크로프로세서에 제어기를 적용 하였고, 전동기 에너지의 효율적 이용 등 회생 제동에 의한 제동력 확보와 전기 제동으로 정지하는 알고리즘을 적용하여 전동기 관성부하에 대한 시뮬레이션 및 실험결과를 제안하였다.

• 한국정보통신학회논문지
• /
• 제11권12호
• /
• pp.2210-2216
• /
• 2007

본 논문은 휴대 단말기에 적용할 수 있는 삼중대역(Triple-band) 프라스틱 칩 안테나에 관하여 연구하였다. 프라스틱 칩은 PVC(Polyvilyl chloride)계열의 Foamex 매질을 사용하였으며, 전기적인 특성은 유전율이 1.9이고, 절연밀도는 112KV/cm이다. 프라스틱 칩 안테나는 세라믹 칩 안테나보다 잘 파손되지 않고, 이득과 효율이 좋은 장점을 가지고 있다. 본 논문에서는 4종류의 삼중대역 프라스틱 칩 안테나를 제작하고 실험하였다. 실험 결과 삼중대역에서 공진하였고, 안테나 이득은-2dB이상이고, 안테나 패턴은 일반적인 칩 안테나와 비슷한 전 방향 특성을 갖는다. 따라서 Foamex 매질을 이용하여 구현된 안테나는 삼중대역용 휴대폰과 다양한 무선통신시스템에 적용될 수 있다.

• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.47-52
• /
• 2011

Currently, Exterior wall's U-value about building envelope is 0.36 W/$m^2K$(Central Region), but window's one is 2.1 W/$m^2K$ according to air gap of glazing, filling gas, coating and type of windows. The door"s one is 1.6~5.5 W/$m^2{\cdot}K$ depending on material and configuration of door. As such, energy loss per unit of door is considerably larger like windows. The door for the recognition was relatively low because energy loss through the door is relatively small compared to window area. In this paper, thermal performance was analyzed through simulation targeting the door which has thermal break that can improve the insulation performance and doesn't have one. As a results of simulations, case1 was calculated as the average of 1.63 w/m2k and case 2 was calculated as the average of 4.14 w/m2k. The thermal performance of door depends on the type and condition of insulations. As a results of final simulations, Case1 was calculated as 1.06 w/m2k and Case2 was calculated as 1.27 w/m2k. As a results of the experiments, thermal performance of case 1 was measured as 1.28 w/m2k. Error between experiments and simulations is considered problems encountered when creating the samples. The effect of door frame on the overall thermal performance is slight because it's a small proportion of the door frame.

• Computers and Concrete
• /
• 제21권6호
• /
• pp.623-635
• /
• 2018

In order to research the influence of different recycled aggregate contents on the mechanical properties of pervious concrete, the experimental study and numerical simulation analysis of the mechanical properties of pervious concrete with five kinds of recycled aggregates contents (0%, 25%, 50%, 75% and 100%) are carried out in this paper. The experimental test were first performed on concrete specimens of different sizes in order to determine the influence of recycled aggregate on the compressive strength and splitting tensile strength, direct tension strength and bending strength. Then, the development of the internal cracks of pervious concrete under different working conditions is studied more intuitively by $PFC^{3D}$. The experimental results show that the concrete compressive strength, tensile strength and bending strength decrease with the increase of the recycled aggregate contents. This trend of reduction is not only related to the brittleness of recycled aggregate concrete, but also to the weak viscosity of recycled aggregate and cement paste. It is found that the fracture surface of pervious concrete with recycled aggregate is smoother than that of natural aggregate pervious concrete by $PFC^{3D}$, which means that the bridging effect is weakened in the stress transfer between the left and right sides of the crack. Through the analysis of the development of the internal cracks, the recycled aggregate concrete generated more cracks than the natural aggregate concrete, which means that the recycled aggregate concrete is easier to form a coalescence fracture surface and eventually break.

• 산업경영시스템학회지
• /
• 제44권3호
• /
• pp.39-49
• /
• 2021

The Korean Air-Force aircraft maintenance depot paints the exterior of various aircraft, including high-tech fighters. Aircraft exterior painting is a maintenance process for long-term life management by preventing damage to the aircraft surface due to corrosion. The de-painting process is essential to ensure the quality of aircraft exterior paints. However, because the Korean Air-Force's de-painting process is currently done with sanding or Plastic Media Blasting (PMB) method, it is exposed to harmful dust and harmful compounds and consumes a lot of manpower. This study compares the de-painting process currently applied by the ROK Air-Force and the more improved process of the US Air Force, and performs economic analysis for the introduction of advanced equipment. It aims to provide information that can determine the optimal time to introduce new facilities through Cost-Volume-Profit (CVP) analysis. As a result of the analysis, it was confirmed that the sanding method had the most economical efficiency up to 2 units per year, the PMB method from 3 to 21 units, and the laser method from 22 units or more. In addition, in a situation where the amount of de-painting work is expected to increase significantly due to the increase in fighters in future, BEP analysis was conducted on the expansion of the existing PMB method and the introduction of a new laser method. As a result of the analysis, it was confirmed that it is more economical to introduce the laser method when the amount of work exceeds the PMB work capacity(18 units per year). The paper would helpful to improve the productivity and quality of the Korean Air Force Aircraft maintenance depot through timely changes of facilities in the workplace in preparation for expansion.

• 국제지역연구
• /
• 제14권3호
• /
• pp.62-84
• /
• 2010

본 논문은 중국, 홍콩, 대만 주식시장들 사이의 동태적 상호의존성을 연구한다. 이를 위하여 아시아 금융위기가 그러한 상호의존성의 구조전환점인지를 검토하고, 이를 아시아 금융위기를 기준으로 세 가지 분석기간을 설정하여 수익률과 변동성의 정보전이효과를 분석한다. 전체기간을 대상으로 한 실증분석 결과 세 시장 수익률 평균과 비대칭 변동성 사이에 정보전이효과가 유의하게 존재한다는 증거가 발견되었다. 이는 세 시장 간에 정보전이와 비대칭적 변동성이 존재한다는 것을 암시한다. 또 수익률 평균과 비대칭 변동성 사이에 존재하는 정보전이효과의 크기가 금융위기 이후 증가한 것으로 나타났다. 이러한 사실은 아시아 금융위기 이후 중국, 홍콩, 대만 주식시장의 통합이 더 강화된 것을 의미한다. 특히 변동성 정보전이효과의 비대칭성이 금융위기 이후 더 심화된 것으로 나타났다. 이러한 사실은 긍정적 충격보다 부정적 충격이 대중국 주식시장 변동성에 미치는 영향이 금융위기 이후 더 심화된 것을 의미한다. 결론적으로 아시아 금융위기가 중국, 홍콩, 대만 주식시장의 정보전이와 비대칭성을 심화시킨 것으로 판단된다.

• 비교문화연구
• /
• 제27권
• /
• pp.167-195
• /
• 2012

A Chinese female writer Linhaiyin(林海音) and Chengnanjiushi(城南舊事), her representative work, have never been studied in Korea before although she and her literary works stand high and are well known in the history of the modern Chinese literature. Thus, in this paper, I analyze her and her novels included in Chengnanjiushi and study their literary value and meaning. To analyze and study them, I mainly consider novels Anhuiguan, Womenkanhaiqu, Lanyiniang, $L{\acute{\ddot{u}}}dagunr$, and Babadehuarluole included in Chengnanjiushi. Firstly, I look into her attitude and mode to observe children and women's life as a writer. Such attitude and mode succeeded to the spirit of the '5.4 literature'. Secondly, I evaluate Linhaiyin's 'Both sides complex' and its value in the history of literature. From this evaluation, the meaning of Linhaiyin's literature is highlighted. She was free from 'Both sides complex' occurred due to the circumstance of the times and played a role of a bridge so as not to break off literature of China and Taiwan. When her and her works are evaluated, this is one of the most important values. The characteristic of her writing mode is that she did not seek a compelling climax, a surprising reversal, or an exclusive plot or character in her works. In her works, plain description or unwitting conversation and story often imply deep meanings. Thus, at unexpected moment after reading her novels, readers truly listen to deep resonance for her attitude and mode to observe people's life. This is exactly her potential energy that makes readers sink into her literary world regardless of time and space.

• 비교문화연구
• /
• 제33권
• /
• pp.241-262
• /
• 2013

Nietzsche in the early 20th century, many Western thought came to China pushed the time, who want to reform the Chinese young intellectuals was a great welcome. Around 5.4 times writers representing China Journalism Guo Mo ruo Mao Dun and social needs of the times according to the spirit, according to their ideology, no tubes and four optional understand Nietzsche. Was acceptable, in the process, Nietzsche was transformed hem into various forms. In this paper, two Guo Mo ruo Mao Dun accept Nietzsche as Nietzsche socreated their own awards and also looked at these similarities and difference. Nietzsche Guo Mo ruo the remnants of the old feudal ideas and traditions were to break down and accept only select perspective. Nietzsche's self-discovery and individual liberty, and against the reality and accept the terms of loan 5.4 seconds, an ideal Nietzsche award was created. However Guo Mo ruo particular aspect of the acceptance of Nietzsche, whereas Nietzsche regarded as an extreme pessimist history, and his extreme caution and idealistic form of individualism was often criticized. Mao Dun the core ideas of Nietzsche 'Superman' and 'will power' noted. 5.4 All time view of life, a new morality must re-evaluate the need for a practical, based on the old tradition of Nietzsche completely against the spirit of rebellion was to have especially appreciated. But this was different Mao Dun Nietzsche and moral beliefs. What is the old morality Nietzsche corrupt, bourgeois morality and ethics, and was negative for democracy and freedom, Mao Dun dark realities facing the old Chinese feudal and traditional idea ofrevolution as a democrat were negative for. Guo Mo ruo Mao Dun optional for Nietzsche's acceptance was 5.4 times that contemporary needs can be met.

• 한국의류산업학회지
• /
• 제21권2호
• /
• pp.203-208
• /
• 2019

This paper considers the moisture permeability and fashion in the upper fabrics of cotton fabric shoes woven into various tissues and properties measured to examine the use as upper fabrics. We measured the tissues of the manufactured upper fabric are 1/3 twill, $4{\times}4$ weft rib, Maya, Triple, Deformed twill design (DTD), Diamond tissues and tear strength, tensile strength, breaking elongation, stretching under load at 100N, stitch tear resistance, and fastness. In the case of $4{\times}4$ weft rib, the tear strength and tensile strength were excellent; however, the elongation and stitch tear resistance at 100N load were less than the standard value. DTD fabrics are characterized by physical properties in the warp direction that are superior to those in the weft direction; however, the tear strength and tensile strength in the weft direction are less than the standard value. The 1/3 twill fabrics showed high tensile strength value and stitch tear resistance value in the warp direction; however, toughness, the main property of the shoe upper, was below the standard value. Triple and diamond fabrics, which have a significant effect on the performance of the shoe upper fabric, also had less than the standard value of tear strength. Maya upper fabric for shoes has better properties than other upper fabrics except for the elongation at break, and the stitch tear resistance has a value of 178% in the warp direction and 214% in the weft direction compared to the standard value. Therefore, the Maya fabric showed the possibility of being used as an upper textile for shoes.