• Journal of Biosystems Engineering
• /
• 제28권3호
• /
• pp.199-208
• /
• 2003

In order to solve the shortage of roughage supply for dairy farm in Korea, winter cereal forage production after harvesting of rice in the fallow paddy field is studied. This study consist of two parts. One is the model development of the mechanized production which was already reported at the preview paper. This is the 2nd parts of the study. Also, the mechanized production model for cereal forage production in winter was reported in the previous study. In this paper, coverage area and mechanized wrap silge production cost are analyzed and compared to the other available feeds in Korea. Results of the research are summarized as follows; The coverage area for the winter cereal wrap silage production system in Korea is estimated to be 33.7 ha in case of working with a tractor and a set of implements. If two or three tractors are available, the coverage area is estimated to be 68.0 and 101.3 ha, respectively. The break even point (BEP) of the farming size is analyzed as 10 ha and its production(operating) cost is estimated to be 317 to 443 won/TDN-kg at the BEP point. The cost is lowered to 182 won/TDN-kg at 100ha-working, and is much lower compared with prices of imported feeds of 360∼600 won/TDN-kg. Therefore, winter cereal wrap silage model is judged to be feasible and desirable for a large scale production of forage in winter fallow paddy field.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제27권2호
• /
• pp.134-147
• /
• 2000

국.내외적으로 소프트웨어 산업이 활성화되었음에도 불구하고, 정보보호 소프트웨어 시스템의 보안성 평가를 포함한 각종 소프트웨어의 품질 평가 업무량 및 평가 비용 산정에 대한 연구는 부족하다. 본 연구에서는 업무분해구조(EWBS) 방법과 기존의 소프트웨어 개발비 산정 방법을 응용하여, 정보보호 시스템의 평가기준(Common Criteria 또는 ISO/IEC 15408)에 따라 정보보호 시스템을 평가 할 때의 평가 업무량과 평가 비용을 산정하는 프로세스와 도구를 제시한다. 본 연구는 정보보호 시스템의 평가 업무량과 평가 비용의 산정에 중심을 두고 있지만, 본 연구의 결과는 기존의 소프트웨어 개발 프로세스 및 제품의 품질 평가시의 평가 업무량 및 평가 비용의 산정에도 응용될 수 있다.

• East Asian Economic Review
• /
• 제21권2호
• /
• pp.103-121
• /
• 2017

This paper experimentally studies the performance of negotiation considering individual and party, like a country, share of benefit over the best ones. It experiments two-stage bargaining games, internal and external negotiations. From the experimental results, this paper shows strong tendency to select fair allocation in the internal negotiations, but the tendency would be weaker with attractive outside option. In addition, the outside option may claim difference in individual benefit. From the regressions on individual performance in the negotiations, being a proposing party would matter to enhance the performance. However, relative individual performance within party fairness matters. Still attractive no-agreement options happen to break the tendency. As policy implication for trade negotiation, this paper warns that possible loss in individual benefit from not active participation to the external negotiations, no active role of proposer in case that players stick to internal allocations, and deviation of advantageous sector due to attractive outside options.

• 영미문화
• /
• 제18권1호
• /
• pp.23-51
• /
• 2018

This paper focuses on historical instances of iconoclasm after the Reformation to reveal how iconoclasm had greatly contributed to the formation of the Protestant mindset in the early modern times. During the English civil war, when iconoclastic campaigns and movements were in full tide, the paper argues that the notions of novelty and progress were more positively accepted among radical religious groups. To put it in another way, the paper suggests a different way of looking the formation of Protestant habitus by giving accounts of how iconoclastic impulses spurred diverse religious groups during the civil war to break the mold of conservative thinking and to revolutionize the print culture hitherto based on patronage and served as a buttress for status-quo. From this analysis, then, we are ledto the different portrait of the protestant in the seventeenth century, whose mindset was not quite as solitary and guilt ridden as Max Weber would have us believe.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.693-699
• /
• 2010

General transformer's life is known as paper insulation' life. If a transformer is degraded by these aging factors, it is known that electrical, mechanical and chemical characteristics for transformer's oil-paper are changed. When the kraft paper is aged, the cellulose polymer chains break down into shorter lengths. It causes decrease in both tensile strength and degree of polymerization of paper insulation. The paper breakdown is accompanied by an increase in the content of furanic compounds within the dielectric liquid. In this paper it is aimed at analysis on correlation between aging characteristics for insulating diagnosis of thermally aged paper. For investigating the accelerated aging process of oil-paper samples accelerating aging cell was manufactured for estimating variation of paper insulation during 500 hours at $140^{\circ}C$ temperature. To derive the results, it was performed analysis such as tensile strength(TS), depolymerization(DP), dielectric strength(DS), relative permittivity, water content(WC) and furan compound(FC) for aged paper. Also for analyzing correlation between insulating degradation characteristics, we used linear regression method. As as results of linear regression analysis, there was a close correlation between TS and DP. WC, FC. But dielectric strength was a weak correlation with aging time.

• 펄프종이기술
• /
• 제37권4호통권112호
• /
• pp.32-37
• /
• 2005

To Increase the productivity of a paper machine, the maximization of the machine speed is a kind of simple way As the machine speed increases, more intense wet pressing is required to persist the outlet consistency of press part and reduce the water removal of dryer part. With more intense pressing, there are concerns that the quality of paper will be affected. This study was carried out to evaluate the influence of wet-pressing on internal structure of paper, The nip pressure at the first and third nip in triple nip press was controlled. Paper structures, strength properties and pore properties were evaluated. As a result, first nip pressure more strongly influenced the paper structural properties than third nip pressure in triple nip pressing condition. Because of the high water content and low wet-web strength of paper web in first nip, increasing the first nip pressure induced the incipient crushing of wet-web and then caused a potential of web break during the following coating or printing processes.

• 펄프종이기술
• /
• 제31권5호
• /
• pp.57-72
• /
• 1999

Traditional theories of the tensile failure of paper have assumed that uniform strain progresses throughout the sheet until an imperfection within the structure causes a catastrophic break. The resistance to tensile elongation is assumed to be elastic , at first, throughout the structure, followed by an overall plastic yield. However, linear image strain analysis (LISA) has demonstrated that the yield in tensile loading of paper is quite non-uniform throughout the structure, Traditional theories have failed to define the flaws that trigger catastrophic failure. It was assumed that a shive or perhaps a low basis weight area filled that role. Studies of the fracture mechanics of paper have typically utilized a well-defined flaw around which yield and failure could be examined . The flaw was a simple razor cut normal to the direction of tensile loading. Such testing is labeled mode I analysis. The included fla in the paper was always normal to the tensile loading direction, never at another orientation . However, shives or low basis weight zones are likely to be at random angular orientations in the sheet. The effects of angular flaws within the tensile test were examined. The strain energy density theory and experimental work demonstrate the change in crack propagation from mode I to mode IIas the initial flaw angle of crack propagation as a function of the initial flaw angle is predicted and experimentally demonstrated.

• 산업기술연구
• /
• 제17권
• /
• pp.191-197
• /
• 1997

For each construction material used, there is certain theoretical limit in sizes. For tall building construction, the reduction in slab weight is the first step to take in order to break such size limits. In this paper, the feasibility of such objective is proven and given by numerical analysis result. For a typical building slab, both concrete and advanced composite sandwich panels are considered. The concrete slab is treated as a special orthotropic plate to obtain more accurate result. Any method may be used to obtain the deflection influence surfaces needed for this vibration analysis. Finite difference method is used for this purpose, in this paper. The influence of the modulus of the foundation on the natural frequency is thoroughly studied.

• 음성과학
• /
• 제9권1호
• /
• pp.89-110
• /
• 2002

Intonation is very difficult to describe and it is furthermore difficult to compare intonation between different languages because of their differences of intonation systems. This paper aims to compare some intonation phenomena between Korean, French and English. In this paper I will refer to ToBI (the Tone and Break Indices) which is a prosodic transcription model proposed originally by Pierrehumbert (1980) as a description tool. In the first part, I will summarize different ToBI systems, namely, K-ToBI (Korean ToBI), F-ToBI (French ToBI) and ToBI itself (English ToBI) in order to compare the differences of three languages within prosody. In the second part, I will analyze some tokens registered by Korean, French and American in different languages to show the difficulties of learning other languages and to find the prosodic cues to pronounce correctly other languages. The point of comparison in this study is the Accentual Phrase (AP) in Korean and in French and the intermediate phrase (ip) in English, which I will call ' subject phrase ' in this study for convenience.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2007년도 추계학술논문발표회 논문집
• /
• pp.205-210
• /
• 2007

This study on the prevention of electric fire. Generally the electric fire is caused by break or disconnection of the power line, short circuit and poor contact, arcing fault ect. In these causes, this paper is studied on the detection of poor contact and arcing fault. The arcing fault is caused by poor contact mainly. The arcing fault can occurs a electric fire by interaction of flammable gas and materials and it can be caused of tracking and carbonization. These phenomenons is also caused of electric fire. Therefore this paper is studied on the detection of arcing fault and poor contact.