• Journal of the Korea Convergence Society
• /
• v.8 no.10
• /
• pp.305-310
• /
• 2017

The purpose of the study is to test structural relationship of subjective health, ability to work, participation on economic activity, and life satisfaction among the elderly. Recently, societies have tried to lessen a social burden and alleviate negative perceptions of the elderly through some perspectives such as productive aging and active aging. In these perspectives pay attention to health and social participation to improve quality of life. Subjects were 3,392 elderly people over the age of 65 from 10th Korea Welfare Panel Study. The main results of the study are as follows. First, subjective health, ability to work, and participation on economic activity had a direct effect on life satisfaction among the elderly. Second, subjective health had a statistically significant effect on ability to work and participation on economic activity. Finally, avility to work had a positive effect on participation on economic activity. Based on the results of the analysis, this study suggested that health and work related factors should be considered as the important factors to improve the life satisfaction among the elderly.

• KDI Journal of Economic Policy
• /
• v.29 no.1
• /
• pp.177-196
• /
• 2007

This paper investigates the cyclical patterns of buffer capital using an unbalanced panel data for the banks in 30 OECD countries and 7 non-OECD Asian countries. We test whether the relationships between buffer capital and business cycle are systematically different across country groups controlling for other potential determinants of bank capital. We find that the correlation is positive for developed countries while it is negative for Asian developing countries. These findings suggest that, once Basel II is implemented, developing countries are more likely to observe an increase in output volatility. We then review the policy recommendations to mitigate the procyclicality problem of Basel II.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.22 no.4
• /
• pp.549-558
• /
• 2016

Purpose: The purpose of this study was to develop and validate a Nursing Competency Scale in Simulation (NCSS) for nursing students. Methods: A preliminary version of the NCSS of 14 items was derived from the literature. A panel of seven experts reviewed the preliminary version for content validation and developed 15 items scale. A convenient sample of 195 nursing students completed the survey and two evaluators measured the performances of nine teams in a simulation scenario with NCSS. The data were analyzed using exploratory factor analysis, descriptive statistics, independent t-test and Cronbach's alpha. Intraclass correlation coefficient (ICC) was used in order to estimate the degree of inter-rater reliability. Results: An exploratory factor analysis demonstrated that two factor structures of the NCSS explained 51.1% of the total variance. Two factors were named psychosocial skills and cognitive and psychomotor skills. The mean scores of NCSS between third and 4th grade were significantly different providing support for its known-group validity. Cronbach's alpha was .90 and ranged from .79 to .88. The overall ICC for inter-rater agreement was 0.89 (95% CI 0.03 to 0.98). Conclusion: This scale shows preliminary evidence for validity and reliability. It could be a useful instrument for measuring learning outcome in simulation for nursing students' clinical competency.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.13-19
• /
• 2004

We have been studied on the high concentration ozonized water production technology which substitute for the SPM wet cleaning solution process as the PR strip process after the photolithography process in the semiconductor and flat panel display manufacturing. In this work, we have developed the surface discharge type ozone generator which has the characteristics of the 12 ［wt%］ ozone concentration at the oxygen gas flow of 0.5［ℓ/min］ oxygen per cell and also developed the high efficiency ozone contactor for the mixing ozone gas with deionized water. As the production test results of the ozonized water, we obtained the ozonized water concentration above 80［ppm］ at the 10［wt%］ ozone gas concentration, and also had a good result of the PR strip rate of 147［nm/min］. at the 70［ppm］ ozonized water.

• Human Ecology Research
• /
• v.54 no.5
• /
• pp.487-498
• /
• 2016

The study was examined the multiple mediated effects of maternal self-efficacy and depression between perception gap about paternal involvement and marital conflict for dual-income parents. The data used were the fifth year data of the Panel Study on Korean Children from Korea Institute of Child Care and Education in 2012. The subjects consisted of 449 dual-income parents with more than one child. Data were analyzed using descriptive statistics, one-way analysis of variance, paired t -test, and correlation. SPSS macro and bootstrapping methods also assessed the mediation effects of maternal self-efficacy and depression between the perception gap about paternal involvement and marital conflict in dual-income parents. The results of this study were as follows. Significant positive correlations were observed for marital conflict, perception gap of dual-income parents about paternal involvement and maternal depression. Perception gaps by parents and self-efficacy were negatively correlated. Perception gaps by parents showed a direct effect on marital conflict. The results of indirect effects of all mediators showed the mediated effect of maternal self-efficacy and depression. The study revealed that the perceptive gap about paternal involvement has a significant impact on maternal self-efficacy and depression, as well as marital conflict. The perceptive gap of dual-income parents about paternal involvement has critical effects on marital conflict as much as the quantity of paternal involvement.

• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.429-439
• /
• 2015

This study develops a new brassiere for new silver women. A new brassiere design was developed for the silver generation based on apreliminary survey; subsequently, a wire and no-wire type of brassier were developed after a second fitting evaluation. The results were as follows. First, in terms of brassiere design, the cup shape was designed as mold type full cup, shoulder straps were designed as camisole type with cups, bias tape was designed for body correction in the side line and mash tape was designed for easy movement below the cups. On the other side ofthe cup shape was a pocketdesigned on a support pad forthe wire type and a support panel to serve as a wire in the no-wire type brassiere. Second, brassiere patterns were designed by referencing the educational H pattern. Thetotal length was elongated by 5cmto reduce pressure when wearing a brassiere and the height of the front center increased by 8cm for the stability of the front center of the brassiere. In addition, the side line was moved back by 3cm and the width of the brassiere wings was designed widely at 10.5cm. Third, a wearing test was conducted for the wire type and the no-wire type brassiere with comparison products, using a 7-point Likert scale. Appearance results and movement tests for the wire and no-wire type showed a higher score than comparison products.

• Steel and Composite Structures
• /
• v.27 no.3
• /
• pp.337-353
• /
• 2018

In previous weak-axis moment connection tests, brittle fracture always initiated near the edge of the beam flange groove weld due to force flow towards the stiffer column flanges, which is the opposite pattern as strong-axis moment connections. As part of the China NSFC (51278061) study, this paper tested two full-scale novel weak-axis reduced beam section moment connections, including one exterior frame connection specimen SJ-1 under beam end monotonic loading and one interior frame joint specimen SJ-2 under column top cyclic loading. Test results showed that these two specimens were able to satisfy the demands of FEMA-267 (1995) or ANSI/AISC 341-10 (2010) without experiencing brittle fracture. A parametric analysis using the finite element software ABAQUS was carried out to better understand the cyclic performance of the novel weak-axis reduced beam section moment connections, and the influence of the distance between skin plate and reduced beam section, a, the length of the reduced beam section, b, and the cutting depth of the reduced beam section, c, on the cyclic performance was analyzed. It was found that increasing three parametric values reasonably is beneficial to forming beam plastic hinges, and increasing the parameter a is conducive to reducing stress concentration of beam flange groove welds while increasing the parameters b and c can only reduce the peak stress of beam flange groove welds. The rules recommended by FEMA350 (2000) are suitable for designing the proposed weak-axis RBS moment connection, and a proven calculation formulation is given to determine the thickness of skin plate, the key components in the proposed weak-axis connections. Based on the experimental and numerical results, a design procedure for the proposed weak-axis RBS moment connections was developed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.11
• /
• pp.1646-1652
• /
• 2002

Si-Raw is a raw cured meat (raw, cured meat fermented with steamed rice) produced by the aboriginal people of Taiwan. In order to prevent food poisoning or intoxication from botulism, new methods of monitoring the production base on hurdle technology were investigated. New methods investigated incorporated citric acid, sodium hypophosphite, Monascus anka mash, plum paste or lactic acid bacteria inoculum added separately to meat with steamed rice and salt to lower the Aw (water activity) and pH values of the products to control the microbial growth. Results showed that anaerobic bacterial counts, lactic acid bacterial counts and aerobic bacterial counts for the products of all treatments were less than $10^6$, $10^5$ and $10^2cfu/g$, respectively. Sodium chloride content of all products was above 5.46%, water activity was below 0.939 and pH value was below 4.27. IMP was lower and ATP and hypoxanthine were higher. ATP concentrations were higher in the samples which contained the anka mash. Result of sensory panel test indicated that most people preferred the products with added sodium hypophosphite. Except for the fact that the content of tryptamine in the sample with Monascus anka mash was higher, the amine concentrations for all treatments were lower than those of other fermented meat products. The amino acid nitrogen content was higher in the product made from raw meat treated with citric acid, but lower in the other products. Neither Clostridium botulinum nor Trichinella spiralis were detected in any of the treatments. The result may indicate that hurdle technology is effective for hygiene and safe producing Si-Raw.

• Korean Journal of Adult Nursing
• /
• v.29 no.1
• /
• pp.12-21
• /
• 2017

Purpose: The purpose of this secondary data analysis study was to compare what factors influenced individual's satisfaction with emergency medical services (EMS). Methods: Data were obtained from the Korea Health Panel Survey 2013 with 20,641 participants. A total sample of emergency room (ER) users (n=1,709) aged 20 and over were selected and divided into two age groups, one for 1,046 adults and the other for 663 elderly. Participants' responses were analyzed using descriptive statistics, ${\chi}^2$ test and logistic regression. Results: Among adults and elderly who were transferred to other hospitals instead of being admitted or returned to their homes reported less satisfaction (${\chi}^2=10.18$, p=.006). Further, the adults who perceived their arrival to the ER as not delayed (${\chi}^2=3.74$, p=.049) or visited the ER for treatment for illness (${\chi}^2=5.32$, p=.021) reported more satisfaction than those who perceived their ER service being delayed or visited the ER for accident or poisoning. The elderly who visited ER by non-ambulance reported higher satisfaction than those who arrived by ambulance (${\chi}^2=14.15$, p<.001). Conclusion: In both adults and the elderly, satisfaction of EMS can be increased by avoiding transferring patients to other hospital. For adults to be satisfied with EMS, efficient and rapid EMS might be needed to avoid delay in ER arrival, especially for adults with accidents or poisoning.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1379-1383
• /
• 2016

Background: Basal and squamous cell carcinoma (BCC and SCC) are the most common skin cancers worldwide and distinction between the two may sometimes be very difficult in routine histopathology. The present study was aimed to evaluate a reliable diagnostic method for these cancers based on immunohistochemistry (IHC). Materials and Methods: IHC was used with antibodies to Bcl-2, CD10, CEA, and EMA biomarkers, which despite non-specificity are easily available for detection of various types of tumors in pathology sections and can be used as a panel for differentiation. In this descriptive and analytic study, paraffin-embedded blocks of 29 SCC patients and 29 BCC patients were collected and sectioned for IHC staining. The results were analyzed by the STATA (version 8) statistical package using the Chi-square test. Results: BCC patients were 100%, 75.8%, 0% and 0% positive for Bcl-2, CD10, CEA and EMA markers, respectively, and for SCC patients were 3.5%, 0%, 34.5% and 82.7% positive, respectively. Using simultaneously Bcl-2 and CD10 as positive markers, detection of BCC with 88% accuracy and 100% specificity was possible, while application of CEA and EMA positivity could detect SCC with 67% accuracy and 100% specificity. Conclusions: SCC and BCC have different immunostaining profiles; therefore, Bcl-2, CD10, CEA and EMA markers can be helpful to distinguish between them.