• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5963-5973
• /
• 2011

Current design and analyzing methods about soil nailing structures, developed on the basis of results obtained from experiments in laboratory or in field and numerical analyses, have applied different interaction mechanisms between the reinforced nails and the surrounding ground, and different safety factors against failure have been obtained. They might be proper approaches if the assumptions about rigidity of nails and ground conditions are met with actual conditions occurred in field. Otherwise, they would result in designing on analyzing in inappropriate ways so that it is needed to evaluate the validity of them. Therefore, in this research using the Centrifugal Model Testing, numerical parameters experiments about soil nailing structures' behavior and failure mechanism were performed. In the numerical parameters experiments, transmuted nail's length, setting angle, nail's front panel, stiffness variously, and increased the level of gravity until wall model was destroyed. Based on experimental results, we compared the effect, failure mechanism caused from parameters changes. By reviewing and comparing centrifugal model test results and methods currently in use, verified validity of existing methods.

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.164-177
• /
• 2013

This study's aim was to attest social support and self-efficacy's mediation effects in the path which social participation affected to elderly's suicidal ideation. Analysis data were Seoul Welfare Panel Data 2th wave(2010). A total of 1,429 cases aged over 65 were used for this study. Analysis method was AMOS 18.0's Structural Equation Modeling, and sobel test was used for attesting mediation effects's significance degree. Analysis results had established that measurement model and structural model's fit was favorable, and all path coefficients had significance degree. Therefore, this model was suitable for this study. Also this results had proved that this study's model was full mediation model, and it means that if mediation variables controlled, and then direct effect was excluded. And analysis results confirmed social support and self-efficacy' mediation effect had significance, by using a sobel test. Based on analysis results, this study suggested the importance of relationship between secondary group and individual, and presented intervention plans.

• Journal of the Society of Disaster Information
• /
• v.8 no.4
• /
• pp.391-400
• /
• 2012

Recently, the construction industry commonly uses FRP as a reinforcement material because of its material advantages. FRP attached reinforcement has various advantages such as high strength, stiffness, excellent durability and construction practicability comparing to its weight. However, external attachment of FRP is water-tighted with low water permeable material, not draining water, probably causing damages on a permanent structure. The study manufactured it through pultrusion and examined GP(glass fiber panel) of which material-mechanical properties are almost same as the existing FRP but durability and attachment performance are better by stationary experiments, testing load-deflection curve, destruction types and load-deflection relation under repetitive loading test. As a result of 2,000,000 fatigue tests, it did not result in the destruction and showed excellent permanent attachment and durability as it displays significantly low compressive strain of concrete.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.921-926
• /
• 2015

Embossed aluminum sheets were been used in heat insulation purpose for automative exhaust parts because of increasing their surface areas and stiffness reinforcement. However, there are many restrictions because of high rate of wrinkle occurrence on press working. We have performed the tensile and bending tests for embossed sheets to clarity its mechanical properties and springback characteristics. Embossed aluminum sheets showed a different flow stress after plastic yielding due to flattening the embossed cone shape. Above all, yield stress of parallel embossed specimen decreases while its diagonal one increases and the decrease of young's modulus in the embossed sheets contributes to the increase of springback amount.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6282-6288
• /
• 2014

$CO_2$ welding is used widely in the field. On the other hand, welding defects occur when welders cannot adjust the current and voltage needed for welding and have to stop working to adjust the current and voltage, causing sudden cooling down of the welding structure inside a vehicle or tank where the control panel is invisible or when work site is far. This study used three types of existing $CO_2$ welders. This also applied SS400 rolled steel for welding structural purposes for remote control torch welding, perform a welding test through v-groove butt welding with a remote control torch and existing $CO_2$ welding torch, conducted visual inspection on the appearance of a welded top bead. In addition, the appearance quality of the welding part was monitored mainly through penetrant testing and a bending test to evaluate the welding defect reduction and the effect on the performance and compatibility by replacing the existing welder.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.307-312
• /
• 2011

Purpose: To investigate the prevalence of congenital and age-related color vision deficiencies over a wide range of ages among residents in two urban communities of Kyeonggi-Do. Methods: A total of 935 subjects, consisting of 452 males and 483 females, participated in this study. Lanthony D-15 desaturated panels test were used to assess color vision. Results: Prevalence of color vision deficiency was 4.81% for total, 6.64% for males and 3.11% for females. Congenital color vision deficiency was 3.54% for males and 0.41% for females. Tritan deficiency, which was the post-natal age-related, was 2.99% (3.32% for males, and 2.69% for females). Conclusions: The result imply that color vision deficiencies is influenced by age. As an age-related color vision deficiencies, Tritan is most frequently found in the age group over 50.

• Journal of Preventive Medicine and Public Health
• /
• v.43 no.3
• /
• pp.193-204
• /
• 2010

Objectives: The objective of this study was to analyze the causal relationship between smoking and depression using longitudinal data. Methods: Two waves of the Korea Welfare Panel collected in 2006 and 2007 were used. The sample consisted of 14 426 in 2006 and 13 052 in 2007 who were aged 20 and older. Smoking was measured by smoking amount (none/$\geq$ two packs). Depression was defined when the summated CESD (center for epidemiological studies depression)-11 score was greater than or equal to 16. The causal relationship between smoking and depression was tested using logistic regression. In order to test the causal effect of smoking on depression, depression at year 2 was regressed on smoking status at year 1 only using the sample without depression at year 1. Likewise, smoking status at year 2 was regressed on depression at year 1 only using those who were not smoking at year 1 in order to test the causal effect of depression on smoking. The statistical package used was Stata 10.0. Sampling weights were applied to obtain the population estimation. Results: The logistic regression testing for the causal relationship between smoking and depression showed that smoking at year 1 was significantly related to depression at year 2. Smoking amounts associated with depression were different among age groups. On the other hand, the results from the logistic regression testing for the opposite direction of the relationship between smoking and depression found no significant association regardless of age group. Conclusions: The study results showed some evidence that smoking caused depression but not the other way around.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.4
• /
• pp.277-286
• /
• 2016

The first part of this study found the tendencies of the mechanical properties of two arctic structural steels (EH32 and FH32). In the second part, the crashworthiness of stiffened panels scaled down from the side frame structure of a Korean research icebreaker was determined. A procedure for designing the shapes and sizes of the stiffened panels, mass and shape of a drop striker, and a large temperature chamber, and then manufacturing these, is introduced in detail. From impact bending tests for the stiffened panels, the residual permanent deformations and deformation histories over time were captured using manual measurement and video image analyses. Numerical simulations of the impact bending tests were carried out for three different finite element models, which were mainly composed of shell elements, solid elements, and solid elements, with welding beads. It was proven from a comparison of the test results and numerical simulation results that the solid element model with the welding bead consideration approached the test results in terms of the residual deformations as long as the strain rate effect was taken into account.

• Korean Journal of Social Welfare Studies
• /
• v.44 no.3
• /
• pp.5-30
• /
• 2013

The aim of this study is to identify the influence of public housing on depression of its residents by analyzing the 7th Korea welfare panel study. To reduce the selection bias which arise from the public housing is selected by personal choice, we used PSM(propensity score matching). In addition, we merged the result of PSM and OLS regression to control the other variables which can affect depression of the resident of public housing. Final result revealed that the statistical significance which was observed when we compared the level of depression between the residents of public housing and general community by independent t-test was not observed when we used the merged result from PSM and regression. These results suggest that the high level of depression in the residents of public housing might be related with their demographic characteristics or earned income not with the public housing itself. This study can be the evidence supporting the policy of providing public housing because living in public housing did not give negative influence on its residents. Considering that this study also showed that there were no observable positive influences of public housing, we can suggest that public housing policy for majority of people not limited to people with low income.

• Journal of the Korean Society of Child Welfare
• /
• no.59
• /
• pp.59-86
• /
• 2017

The purpose of this study was to investigate the effects of childhood obesity on school adjustment and whether the effects were mediated by withdrawal. Using the 2015 Korea Welfare Panel Study data, this study conducted a hierarchical regression analysis to examine the mediating effects of withdrawal on the relationship between childhood obesity and school adjustment. In addition, a Sobel test was used to consider the statistical significance of the mediating effects. Findings were as follows: First, childhood obesity had a negative influence on school adjustment. Second, childhood obesity affected withdrawal positively. Third. withdrawal had a negative impact on school adjustment. Fourth, withdrawal was found to partially mediate the relationship between childhood obesity and school adjustment. Based on the results, implications were discussed to intervene in preventing childhood obesity and to reduce the negative effects of childhood obesity.