• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.223-224
• /
• 2000

As technology level of TFT-LCD advances, application to TV becomes an emerging important area for LCD makers. In this paper, we review current LCD technology level to be used in TV such as liquid crystal response behavior, color accuracy, contrast ratio, brightness and panel size. Based on the understanding of current limitations in LCD compared with CRT, the improvement plan to render 'near perfect motion picture' reproduction with LCD is proposed. Digital TV is a great opportunity for digital LCD panels, but we have to solve remaining technical and cost issue in order to be competitive with other large size TV technologies such as PDP, CRT or projection type. In preparing the upcoming digital TV era with advanced TFT-LCD, the hurdles and prospect of larger size LCD-TV panels will be discussed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.739-744
• /
• 2007

Wind loads for cladding can be estimated using the maximum wind pressure including gust effects from wind-tunnel tests. However, when estimating the maximum wind pressure with gust effects, wind pressure coefficients for cladding would be different according to the averaging time of wind pressures, In the paper, for wind pressures obtained from wind-tunnel tests for apartment buildings, whose window panes were damaged by actual strong wind, it was investigated how pressure coefficients varied according to the size of cladding and averaging time using TVL method of Lawson. In result, it was found that the lesser the size of cladding and averaging time were, the larger pressure coefficients became. Accordingly, to estimate wind loads for cladding of apartment buildings and design it, the averaging time of wind pressures should be considered properly.

• Journal of Fashion Business
• /
• v.12 no.1
• /
• pp.109-119
• /
• 2008

The purpose of this study is to dvelop the basic pattern of wome which are fitting for 75A. The collected data were statistcally processed usig the SPSS 10.0 for Mans Standard Deiation, Cronbach's $\alpha$, etc. This study suggested a size chart for body measurement for constructing basic brssiere patterns with size of 75A. The construction of this experimental brassiere were lower cup, upper cup, front panel and wing and characterized by a round cup wired as well as a full cup embrcing the entire breasts. The drafting method for constructing basic brassiere patterns for 75A was completed by selecting a total of 11subjects, and two wearing tests were carried out with the subjects. the dimensions and shapes of the basic brassiere pattern suggested in this research proved to be fitting and to have a wearing effect that brings together and supports the breasts.

• Korean Journal of Metals and Materials
• /
• v.47 no.2
• /
• pp.71-78
• /
• 2009

The precipitation behavior of solute carbon and nitrogen strongly affects the mechanical properties of low-carbon automotive panel. In the present study, the effects of aluminum and solute nitrogen on the bake hardenability and strain aging of extremely low-carbon steel with carbon content below 15 ppm has been investigated. The ferrite grain size and distribution of precipitates were varied with the amount of aluminum content of 0.003 to ~ 0.100 wt% in a constant solute carbon and nitrogen. With increasing the aluminum content, the ferrite grain size is increased and strain aging is delayed. The strain aging is also delayed by increasing the annealing temperature, although the ferrite grain size is not much changed.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.341-350
• /
• 2021

This study tested the effect of the board of directors' (BOD) characteristics on the corporate performance of the Jordanian industrial and service companies listed on the Amman Stock Exchange (ASE) during the period 2015-2019. The characteristics of the BOD were measured through the following variables: MO = managerial ownership; CEODU = CEO duality; BI = board independence; GD = gender diversity; ND = nationality diversity; AE = advanced education; BM = board meetings; BSIZ = board size; CSIZ = corporate size; CA = corporate age. The corporate performance was measured by return on assets (ROA) and return on equity (ROE). The corporate size and corporate age were used as control variables. The study sample consisted of 85 industrial and service companies with 425 observations to identify the nature of the effect of the BOD characteristics on performance. This study applied time-series data (panel data), and the multiple linear regression method was used to achieve study objectives. Results showed a positive effect of the study variables on performance, while the corporate age and the education level (BOD members) have a negative effect on performance.

• Journal of the Korean Society of Costume
• /
• v.59 no.1
• /
• pp.159-167
• /
• 2009

Based on instructions in the textbook "How to Construct Korean Costumes" which I authored, my university students were required to make Pungcha-Baji(Korean traditional pants for children) for one-year-old boys. While examining the students' construction, I found that the side seams of the vest and pants did not line up but were improperly twisted. It was found that the pants did not cover the child's backside because the width of the back was smaller than the width of the front when one of the side panels and the large center panel in the front was half the size of the hip and one of the side panels and the small panel in the back was four fifths of half the size of the hip. Although there were differences between the waist size of the pants and the bottom hem of the vest, the textbooks instruct that the amount of material and the number of pleats(i.e. 4 pleats) on the pants and the vest should be the same. Finding this mistake led me to investigate Pungcha-Baji construction in related textbooks. Thus with the textbook instruction, the side seams of the pants and the vest do not match and are improperly twisted. Hence, as a solution, the pleats should be made and adjusted after matching the side seams of the pants and the vest. The purpose of this study is to examine currently available Pungcha-Baji related textbooks and determine the correctness of their instructions and to ultimately provide correct construction methods for Pungcha-Baji pattern for academic purposes.

• Korean Journal of Materials Research
• /
• v.24 no.8
• /
• pp.429-433
• /
• 2014

As the fabrication technology used in FPDs(flat-panel displays) advances, the size of these panels is increasing and the pattern size is decreasing to the um range. Accordingly, a cleaning process during the FPD fabrication process is becoming more important to prevent yield reductions. The purpose of this study is to develop a FPD cleaning system and a cleaning process using a two-phase flow. The FPD cleaning system consists of two parts, one being a cleaning part which includes a two-phase flow nozzle, and the other being a drying part which includes an air-knife and a halogen lamp. To evaluate the particle removal efficiency by means of two-phase flow cleaning, silica particles $1.5{\mu}m$ in size were contaminated onto a six-inch silicon wafer and a four-inch glass wafer. We conducted cleaning processes under various conditions, i.e., DI water and nitrogen gas at different pressures, using a two-phase-flow nozzle with a gap distance between the nozzle and the substrate. The drying efficiency was also tested using the air-knife with a change in the gap distance between the air-knife and the substrate to remove the DI water which remained on the substrate after the two-phase-flow cleaning process. We obtained high efficiency in terms of particle removal as well as good drying efficiency through the optimized conditions of the two-phase-flow cleaning and air-knife processes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.374-374
• /
• 2014

의료용 X-ray는 과거 analog 방식과, 연구가 진행 중이며 현재 많이 사용되고 있는 digital 방식으로 나누어진다. 최근, 광도전체와 형광체 기반의 flat panel X-ray detector의 발전에 따른 상용화가 이루어지고 있으며, 많은 발전 가능성이 제기되고 있다. flat panel X-ray detector 검출방식은 direct method (직접 방식)와 indirect method (간접 방식)로 나누어진다. 본 연구는 일반적으로 상용화 되어있는 amorphous seleinum (비정질 셀레늄)의 큰 일함수에 의한 저 해상력이라는 단점을 보완하기 위해, 작은 일함수를 가지는 물질을 사용하여, 영상을 얻을 시에 높은 해상력으로 표현할 수 있도록 하고, 원자번호가 높은 물질을 사용하여 X-ray 흡수율을 높일 수 있도록 기존 direct method에 많이 사용되고 있는 amorphous seleinum 기반 digital X-ray detector가 아닌, 이러한 장점을 충족시킬 수 있는 PbI2 물질 층을 사용하여 시편을 제작 하였다. PbI2를 같은 두께로 올린 후, 물질 층 상부에 Au 전극 면적을 다른 size로 제작한 시편으로 X-ray에 노출 시켰다. 이는 상부 전극 size 차이에 따른 신호 차이를 측정하여 전기적 특성을 평가하기 위한 것이다. 전도성을 띠고 있는 ITO (Indium - Tin - Oxide) glass를 이용하여 screen printing 방법으로 제작하였다. PbI2층을 약 160~180 um두께, $3cm{\times}3cm$ size로 5개 제작하였으며, 상부 전극으로는 Au를 진공 증착 시켰다. 상부 전극 size는 각각 시편 5개에 $0.5cm{\times}0.5cm$, $1cm{\times}1cm$, $1.5cm{\times}1.5cm$, $2cm{\times}2cm$, $2.5cm{\times}2.5cm$로 PbI2 물질 층 중앙에 증착 시켰다. 이러한 설정으로 X-ray 노출 시 관찰할 수 있는 PbI2의 전기적인 특성을 평가할 수 있었다. 관전압을 40 kVp, 60 kVp, 80 kVp, 100 kVp, 120 kVp, 140 kVp로 설정하고, 관전류는 100 mA로 설정하였으며, Dark current, Sensitivity를 측정하였다. Dark current와 Sensitivity를 측정한 뒤, 그 값을 이용하여 SNR (신호 대 잡음 비)값을 구해보았다.실험 결과 단위면적당 signal과 SNR을 분석할 수 있었다. 80 kVp로 기준을 잡고 결과 값을 보면 $0.5cm{\times}0.5cm$ 시편에서 2.92 nC/cm2, $2.5cm{\times}2.5cm$ 시편에서 0.84 nC/cm2로 상부 전극 크기가 작을수록 더 좋은 신호를 측정할 수 있었다. 똑같은 기준에서 SNR을 계산 해 보았을 때, $0.5cm{\times}0.5cm$ 시편에서 6.46, $2.5cm{\times}2.5cm$ 시편에서 1.91로 SNR역시 상부 전극 크기가 작을수록 더 큰 값을 확인할 수 있었다. 이러한 결과는 edge-effect의 영향으로 인해 나온 결과라고 할 수 있다. 이러한 실험 결과, detector 제작 시, 같은 물질을 사용하여 더 높은 효율을 내기 위해서는 큰 size의 상부 전극 보다는 작은 size의 상부 전극을 증착 시키는 것이 전기적 특성을 더욱 효율적으로 평가할 수 있을 것이라고 사료된다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.99-104
• /
• 2013

Replacement of sensor nodes for monitoring a wide range area such as mountains and forests needs a lot of time and cost. Using new and renewable energy around them can maximize the lifetime of wireless sensor networks, in which solar energy is infinite energy source that is available in 365 days. To design these sensor networks, solar energy model is essential and to estimate and analyze the overall photovoltaic energy. Using this, we can figure out important data such as the size and performance of solar panel needed. However, existing researches for solar energy harvesting consider parts of many factors to influence the quantity of solar energy gathered. In this paper, we suggest advanced solar energy harvesting model considering angular loss (solar cell panel), overheat loss (solar cell), rechargeable battery heat and cooling for each monthly properties. From our experimental results according to outdoor temperature, panel angle and the surface temperature of solar panel, we show these impact factors are correctly configured.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.148-155
• /
• 2002

A study on the installation angle of solar panels is conducted as a conceptual study on solar-RFC(regenerative fuel cell) system for stratospheric airships. The airship heads for the west in winter days and the east in summer days according to wind directions. Considering this, it is found that when the solar panel is installed with the center angle of 30 degree the energy output of solar panels is maximized on winter solstice and satisfies the required energy of summer days as well. Although with the optimized solar panel installation angle, efficiency of the regenerative power system needs be improved to 47% to provide required energy of a 170m-long airship. And the required amount of efficiency improvement decreases as the airship size increases.