• Journal of Korean Clinical Nursing Research
• /
• v.20 no.2
• /
• pp.223-235
• /
• 2014

Purpose: Resuscitation rooms in emergency department are places for time-critical tasks. This study aimed 1) to develop a resuscitation protocol for dyspneic patients and 2) to evaluate the effect of the resuscitation protocol for dyspneic patients in improving clinical performances. Methods: A panel of experts including emergency physicians and nurses developed a resuscitation protocol for dyspneic patients which included a list of critical interventions and time-limits. The resuscitation protocol was implemented in a emergency medical center for two months. Clinical performances of health care providers were compared by analyzing video-recorded clinical performances. Results: The resuscitation protocol consisted of four steps: Initial treatments within 5 minutes, main treatments within 15 minutes, diagnostic tests within 30 minutes, and disposition within 60 minutes. A total of 43 dyspneic patients (23 patients experimental group, 20 patients control group) were included for the analysis of the clinical performance change. Clinical performance rates were improved significantly from control group (66.71%) to experimental group (82.41%) after implementing the resuscitation protocol (Z=-3.09, p=.004). Conclusion: The resuscitation protocol developed for dyspneic patients improved clinical performance rates of health care providers. Further development of clinical protocols for other emergent cases at resuscitation rooms are strongly recommended.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.9
• /
• pp.755-758
• /
• 2012

We developed a new solar simulator to evaluate a large-scale solar cell using seven kinds of LEDs (Infrared, Red, Yellow, Green, Blue, White and Ultra Violet LED). LED solar simulator can be displaced the existing solar simulator which has several demerits such as high power consumption and short lifetime. We have tried to fabricate LED solar simulator which fulfills the spectrum for AM 1.5G condition, and to verify the feasibility of LED solar simulator.

• Korean Journal of Rural Living Science
• /
• v.5 no.2
• /
• pp.93-106
• /
• 1994

The purpose of this study was to develop the pattern of bodysuit and to identify the wear fitness of it The methods of statistical analysis applied to the study were ANOVA and cluster analysis. The materials used in making bodysuit were Nylon/Polyurethane, lace, power net, binding tape, and hook eye. The try-on test was administered in two aspects ; (1) the comparison of anthropometric data before and after trying on the experimentally constructed bodysuit with those of marketing bodysuit, (2) the sensory evaluation to estimate the wear fitness in terms of appearance and motion function. The conclusions obtained are as follows ; 1. In the survey of wearing state, 52.2% of respondents had experience of wearing bodysuit. 60.6% of them responded to the item, “well-balanced body” in the question about the purpose of wearing it. 55.7% considered the item, “feel choky in the chest” as uncomfortable point in putting on bodysuit. 48.3% felt the portion of crotch drawn above in taking exercise or behaving routinely in everyday life. 2. As for the characteristics of the bodysuit design, the scooped neckline and horizontal outline without wire in lower bust was used, the adjust point being located right above the perineum point, and the length of bodysuit is as far as trochanteric point. 3. In comparing anthropometric data of the subjects, there was significant difference in the height of lower bust the distance around abdomen, and the length of bust point(right, left) between the experimentally constructed bodysuit and the marketing bodysuit. 4. Concerning the results of the try-on test in appearance, the estimates of expert panel, which were in agreement with those of subjects in mean value and composite reliability coefficient, showed that the pattern fitness of experimentally designed bodysuit was higher than that of marketing bodysuit. 5. To take try-on test in motion function, motion was classified the five steps. The results of the test showed that experimentally designed bodysuit was fitter in each steps of motion than marketing bodysuit.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.4
• /
• pp.303-311
• /
• 1982

Sensory evaluations of synthetic extracts prepared on the analytical data in the previous papers (Yang and Lee, 1979, 1930-a, 1980-b, 1982) were undertaken to determine the origin of the taste of wild common carp, Cyprinus carpio, and Korean snakehead: Channa argus. Taste panel assessments of synthetic extracts prepared with each extractive component omitted were carried out by a triangle difference test, and changes in taste profile were assessed. The synthetic extracts, prepared with about 40 pure chemicals based on the analytical data from the species satisfactorily revealed the natural taste of the original extracts except slight difference in meaty taste and mildness. From the results of omission test the major components which contribute to produce the taste of the species were assessed as follows: glycine, glutamic acid, arginine, lysine, threonine, alanine, IMP, inosine, hypoxanthine, glucose, succinic acid, $Na^{+},\;Cl^{-}\;and\;PO_{4}^{3-}$ in common carp: glycine, alanine, glutamic acid, IMP, Na+ and $PO_{4}^{3-}$ in Korean snakehead.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.429-433
• /
• 2014

In this study, the morphology and the x-ray quantum efficient of mercury oxide (HgO) and lead oxide (PbO) sensors derived by particle sedimentation method were discussed. In the pursuit of this purpose, we investigated the electrical characteristics and the x-ray quantum efficiency of various thicknesses of HgO and PbO films in mammographic x-ray energy. We have therefore developed a particle-in-binder sedimentation method of fabricating large area polycrystalline films onto transparent glass substrates coated with indium tin oxide. We are currently optimizing the growth method to improve the quantum efficiency with the ultimate goal of obtaining as quantum efficiency close to that of single crystal performance. Our future efforts will concentrate on optimization of large area film growth techniques specifically for deposition on a-Si:H flat panel readout arrays.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.1
• /
• pp.39-46
• /
• 2010

The growth of function in vehicle needs complex display and control system, the In-Vehicle Information System(IVIS). Although current IVISs are widely implemented in commercial vehicles, a new form of IVIS has been recently studied in order to reduce drivers' workloads. The purpose of this study is to suggest an appropriate menu structure of a new type IVIS, to be implemented on the instrument cluster panel, using Taguchi's parameter design. In the research, firstly, functions were selected that are appropriate to control through the instrument cluster among existing functions of current IVISs by quantitative evaluation of ergonomic principles. Then, menu structure alternatives were extracted by investigating priorities to those functions selected. Finally, menu structure alternatives were evaluated through an experiment and suggest the most appropriate one by applying Taguchi's parameter design. Taguchi method was used not only for planning an experiment but also evaluating alternatives. SN ratios were a key value to evaluate the alternatives and to find the most proper one. Through the research, the most appropriate menu structure for the instrument cluster IVIS was finally suggested among the alternatives and it is expected that the results of this research could provide a guideline to the instrument cluster IVIS.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.417-428
• /
• 2020

Investigations of the commercial aircraft impact effect on nuclear island infrastructures have been drawing extensive attention, and this paper aims to perform the safety assessment of Generation III nuclear power plant (NPP) buildings subjected to typical commercial aircrafts crash. At present Part III, the local damage of the rigid components of aircraft, e.g., engine and landing gear, impacting the steel concrete (SC) structures of NPP containment is mainly discussed. Two typical SC target panels with the thicknesses of 40 mm and 100 mm, as well as the steel cylindrical projectile with a mass of 2.15 kg and a diameter of 80 mm are fabricated. By using a large-caliber air gas gun, both the projectile penetration and perforation test are conducted, in which the striking velocities were ranged from 96 m/s to 157 m/s. The bulging velocity and the maximal deflection of rear steel plate, as well as penetration depth of projectile are derived, and the local deformation and failure modes of SC panels are assessed experimentally. Then, the commercial finite element program LS-DYNA is utilized to perform the numerical simulations, by comparisons with the experimental and simulated projectile impact process and SC panel damage, the numerical algorithm, constitutive models and the corresponding parameters are verified. The present work can provide helpful references for the evaluation of the local impact resistance of NPP buildings against the aircraft engine.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.2 s.150
• /
• pp.306-315
• /
• 2006

Today, the uniform is perceived being important, because it transmits the unique company image through visualization of images, improves efficiency of work, and increases the feeling of belonging. Therefore, the purpose of this project was to make the winter uniform for the personnel in the manufacturing and the business departments of Korea Tobacco and Ginseng Corporation. The functional, aesthetic, and symbolic aspects were fully considered throughout the design process for the new uniform. To reflect the worker's opinions, the questionnaire method was used. The questionnaire was made up of the questions about the evaluation criteria and design preference for uniform. The result of the survey was reflected on the uniform design. The uniform consists of a jumper and a pair of pants. The jumper for manufacturing workers has two patched pockets with gussets. It has a convertible collar and a horizontal tuck on front panel. It has an open fastener on the front and a flap to cover the fastener. It has two types of pockets inside for functional reason. The welt one is for a wallet and the small one is for a pen. For the material, melanges with two tones of gray color was used, so it gave the sophisticated look on the uniform. The jumper for business workers also has a convertible collar and inside pockets. It has two slant slash pockets with welt. In addition, it has an attachable fur collar which gives thermal protection and aesthetic effect. The fabric has small check pattern and was made of wool. The pants are a basic trouser style with two pleats on the front.

• Archives of Plastic Surgery
• /
• v.40 no.6
• /
• pp.715-720
• /
• 2013

Background Many people have an interest in the correction of facial scars or deformities caused by trauma. The increasing ability to correct such flaws has been one of the reasons for the increase in the popularity of facial plastic surgery. In addition to its roles in communication, breathing, eating, olfaction and vision, the appearance of the face also plays an important role in human interactions, including during social activities. However, studies on the importance of the functional role of facial appearance. As a function of the face are scare. Therefore, in the present study, we evaluated the importance of the functions of the face in Korea. Methods We conducted an online panel survey of 300 participants (age range, 20-70 years). Each respondent was administered the demographic data form, Facial Function Assessment Scale, Rosenberg Self-Esteem Scale, and standard gamble questionnaires. Results In the evaluation on the importance of facial functions, a normal appearance was considered as important as communication, breathing, speech, and vision. Of the 300 participants, 85% stated that a normal appearance is important in social activities. Conclusions The results of this survey involving a cross-section of the Korean population indicated that a normal appearance was considered one of the principal facial functions. A normal appearance was considered more important than the functions of olfaction and expression. Moreover, a normal appearance was determined to be an important facial function for leading a normal life in Korea.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.173-178
• /
• 2010

In projection radiography, two types of digital imaging systems are currently available, computed radiography (CR) and digital radiography (DR): a difference between them can be stated in terms of dose and image quality. In the Department of Radiology our hospital, a flat-panel DR equipment (Digital diagnost, Philips) and two CR systems (ADC Compact plus digitizer, AGFA) are employed. Eight standard radiographic examinations (Skull AP, Skull LAT, Chest PA, Chest LAT, Abdomen AP, L-spine AP, L-spine LAT, Pelvis AP) were considered: doses delivered to patients in terms of both entrance skin dose (ESD) were calculated and compared in order to study the dosimetric discrepancies between CR and DR. Assessment of image quality is undertaken by Consultant Radiologists to ensure that the quality criteria for diagnostic radiographic images of the European guidelines were met. Results showed that both ESD in DR are lower than that in CR; all images met the criteria in the European Guidelines for both modalities and were used for reporting by the radiologists. Since the operators are the same and the image quality is comparable in both modalities, this study shows that in the considered examinations, DR can perform better than CR from a dosimetric point of view.