• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2051-2052
• /
• 2006

본 연구는 HHP,PDA,PMP,CNS 등등에 사용되는 중소형 A-Si:H TFT LCD 에서의 Automatic Gamma Correction 적용으로 화질 최적화 구현에 좀 더 쉽고 빠르게 접근하게 되었다. Analog Gamma String 대신 1chip Drive IC에 집적된 Gamma resister Ladder를 A-Si:H TFT-LCD Panel 특성에 보다 정확하게 적용시키기 위해 새로운 알고리즘을 개발 했으며 이를 적용시킨 회로를 Test Board로 실제 구현해서 최종결과를 도출하였다. Kick-Rack 전압을 고려한 Asymmetry-Gamma Correction 구현까지 Automatic으로 1chip Drive IC의 Register를 산출 할 수 있도록 알고리즘을 구성했다.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.276-280
• /
• 2007

점차 고성능화 되어가는 Display 제품들을 더욱 저렴하고 일반화하기 위해 제품 공정수를 줄이고 설계 기간을 단축하여야 한다. PCB(Printed Circuit Board) 층수(Stack-up)를 줄이고 회로개발 면에서는 회로를 간략히 하고 부품소자를 최소화하여야 한다. 그리고 기구개발 면에서는 공정을 최소화하고 견고하게 하는 것이 시장 추세이다. 불량 없으면서 초단납기 설계와 대량 생산을 위해 일원화를 추진하고 있다. 곧, 어떤 Customer에게 나가도 A/S 문제가 발생되지 않도록 초기부터 적용하는 최적설계가 필요하다. 본 연구는 Display의 대표라 할 수 있는 PDP(Plasma Display Panel)를 CAE(Computer Aided Engineering)를 이용해 설계함으로써 PDP 회로 최적설계를 하는데 CAE의 활용 사례를 알 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.153-156
• /
• 2000

This paper presents an PID type fuzzy based method for nohnear engine idle controller The output is a duty cycle(DC) for driving a idle speed cont개l valve(1SCV). For precise control of SI engine, the CPS sensor and coolant temperature are used. Visual C* language is used to make simulation panel for the fast and precise idle speed control. The dSPACE board and supported Control desk program is used in experiment ta the same purpose as simulation. The experimental results have a good agreement with simulation ones.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.273-276
• /
• 1997

Seeing is an intelligent act. Retina is the most important part among the components of eye which is comprised of iris, pupil, lens, optic disk, and so forth. Because retina acts like a photo receiver to detect light from every object, if damaged, animals have a severe problem to live along with themselves and sometimes they lose their sight. In the ophthalmology, doctors use special instrument to see exact retina image of object and operate the surgery by rotating focus control knob. In this study, a basic test is done to achieve the auto focus control instrument. Specially made sledge and attenuator are installed on the optic bed to change the distance and laser power between the first reflective mirror and the second one. Control panel which is compiled by Visual C t t to control stepping motors ,laser power and photodiode are implemented with ADA-board.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1723-1728
• /
• 2000

This paper deals experimentally with the effect of the sound-damping sheet on building wall system; brick wall, light wall panel, and gypsum board. Experimental results show that when the sound-damping sheet is attached on wall systems, the mass and/or damping effects result in increasing of STL of wall system depending on the characteristics of the original partition. It is pointed out that the performances of sound damping sheets must be presented with specific wall structures that applied, not by the sound transmission loss of the sheet itself.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.79-80
• /
• 2006

In order to raise productivity of the OLED and realization of the OLED TV, it is required to improve the design of the board size glass panel. The large-size glass substrate has some difficulties regarding its deflection during handling operation due to its small thickness (0.7t) which is not even enough to stand its mass itself. This paper is demonstrating a new solution of this difficult through clamping and bending end condition, which helps to minimize the deflection of the glass substrate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.283-283
• /
• 2004

공장자동화는 국제사회 속에서 살아 남기 위한 필수 요건이 되었다. 값싼 인건비를 무기로 제품 경쟁에 뛰어 들고 있는 주변국가와 경쟁하기 위해서는 인건비 절감과 품질 향상이 필수적이다. 본 논문은 POS용 키보드의 생산공정 중에서 조립된 키보드 칼라 라벨을 자동 검사하는 시스템 개발을 최종목표로 하였다. 현재, 산업용으로 폭 넓게 사용되고 있는 머신 비전 측정시스템은 흑백의 영상과 비교적 간단한 물체에 초점을 맞추고 있다. 그러나, Fig.1의 POS용 키보드는 일반 컴퓨터용 키보드와는 달리 각각의 키가 칼라 라벨로 되어있기 때문에 기존의 흑백 머신 비전 시스템으로 자동화를 구축하기는 힘들다.(중략)

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.149-150
• /
• 2018

Recently, a large fire has occurred through a dry bit, which is a flammable exterior material, in Daebong Green Apartment Fire in Uijeongbu in 2015 and Jecheon Sports Center Fire in 2017. In this study, KS F ISO 5660-1 Cone calorimeter experiment was used to examine the fire risk of dry bit. Also, the performance of the repair and reinforcement materials to prevent fire expansion was examined. As a result, the dry bit is likely to be ignited by internal and external flower gardens, and its combustion rate and calorific value are very high. In addition, the performance of heat resistance such as ALC panel and ceramic board as a repair and reinforcement material has been proved. However, the insulation is expected to require further consideration.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.692-696
• /
• 2005

In an attempt to fabricate all inclusive display systems we are presenting a study on several elements that would be used as building blocks for all-on-board integrated applications on stainless steel foils. These systems would include in the same substrate all or many of the components needed to drive a flat panel OLED display. We are reporting results on both digital and analog circuits on stainless steel foils. Shift registers running at speeds greater than 1.0MHz are shown as well as oscillators operating at over 40MHz. Pixel circuits for driving organic light emitting diodes are presented. The device technology of choice is that based on poly-silicon TFT technology as it has the potential of producing circuits with good performance and considerable cost savings over the established processes on quartz or glass substrates (amorphous Silicon a-Si:H or silicon on Insulator SOI).

• 유통과학연구
• /
• 제10권5호
• /
• pp.19-28
• /
• 2012

The study examines the performance and its relationship with capital structure and agency cost with respect to the industrial configurations and economic groups of Pakistan Economy. The study employs data set of 334 listed joint stock companies from the nonfinancial sectors for the period of 1999-2009 from cotton and textile, engineering, chemical, sugar, cement, fuel and energy, paper and board, transport and communication, and miscellaneous economic groups. Pooled data from the Panel data methodology has been applied to observe the significance of different performance measures through determinant of capital structure and agency costs with special focus on the leverage and cash flows as the direct determinant and interactive variables. The empirical test results using redundant variable tests demonstrate support for agency theory in the context of Pakistan's industrial configurations. The implications of the study point towards more investigations on the subject using industrial configurations as control and moderating variables.