• Journal of the Korean Solar Energy Society
• /
• v.24 no.3
• /
• pp.39-46
• /
• 2004

In this paper, thermodynamic design data for heating of double-effect absorption system using LiCl-water for evaporator heating source of sofar energy are investigated for the water-LiCl pair and a comparative study of the water-LiCl pair with the water-LiBr pair is given used for the computer simulation. The computer simulation is based on mass, material and heat balance equations for each part of the system. Coefficients of performance and flow ratios for effects of different operating temperatures are investigated. It is found that the heating COP is higher for the water -LiCl pair than for the water-LiBr pair, and FR is lower for the water-LiCl pair than for the water LiBr pair.

• Journal of The Korean Association of Information Education
• /
• v.21 no.5
• /
• pp.537-545
• /
• 2017

This paper presents the results of adopting pair programming practices in an introductory university programming course. The effectiveness of pair programming is analyzed by comparing the performance and survey data gathered from the experimental class that adopted the practice to those from the control class that did not. An analysis of the performance data found that pair programming improved student performance; however, not all students in the pair programming class benefited from the practice as only some students showed clear improvements in learning outcomes. The survey showed that the specific method for matching students into pairs is a critical factor affecting their performance and satisfaction. Based on the lessons learned from this pair programming class, I propose some suggestions and guidelines for applying pair programming to programming classes including 'pair matching'.

• Smart Structures and Systems
• /
• v.23 no.3
• /
• pp.279-293
• /
• 2019

To ensure high quality data being used for data mining or feature extraction in the bridge structural health monitoring (SHM) system, a practical sensor fault diagnosis methodology has been developed based on the similarity of symmetric structure responses. First, the similarity of symmetric response is discussed using field monitoring data from different sensor types. All the sensors are initially paired and sensor faults are then detected pair by pair to achieve the multi-fault diagnosis of sensor systems. To resolve the coupling response issue between structural damage and sensor fault, the similarity for the target zone (where the studied sensor pair is located) is assessed to determine whether the localized structural damage or sensor fault results in the dissimilarity of the studied sensor pair. If the suspected sensor pair is detected with at least one sensor being faulty, field test could be implemented to support the regression analysis based on the monitoring and field test data for sensor fault isolation and reconstruction. Finally, a case study is adopted to demonstrate the effectiveness of the proposed methodology. As a result, Dasarathy's information fusion model is adopted for multi-sensor information fusion. Euclidean distance is selected as the index to assess the similarity. In conclusion, the proposed method is practical for actual engineering which ensures the reliability of further analysis based on monitoring data.

• Journal of Information Technology Applications and Management
• /
• v.14 no.4
• /
• pp.17-30
• /
• 2007

In recent years, pair programming has become a widely used approach for development of information systems. According to a worldwide survey, 35 percent of 104 development projects reported using pair programming. However, previous studies have shown rather mixed results in terms of the effectiveness of pair programming, comparing to individual or independent programming. This paper, therefore, uses a lab setting to control some of the variables that appear to have caused conflicting results in earlier studies. Writing SQL Queries for given problem statements is selected as the task the subjects to solve. One key issue addressed is the distribution of work load among the pair programmers and the independent programmers. Another is communication among co-workers as would occur in a real-world system development environment. The results of this study indicate there is no significant difference in task performance pair programming and independent programming.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.4
• /
• pp.1129-1139
• /
• 2006

Pearson's correlation coefficient and vector similarity are generally applied to The users' similarity weight of user based recommender system. This study is needed to find that the correlation coefficient of similarity weight is effected by the number of pair response and significance probability. From the classified correlation coefficient by the significance probability test on the correlation coefficient and pair of response, the change of MAE is studied by comparing the predicted precision of the two. The results are experimentally related with the change of MAE from the significant correlation coefficient and the number of pair response.

• The Korean Journal of Community Living Science
• /
• v.16 no.1
• /
• pp.89-103
• /
• 2005

Recently the rural Korea has been remarkedly changed of family and social value in accordance with the development of industry. The lower economic class made by social economic growth is widespread with increasing aged, specially odd pair family in rural. The purpose of this study was to investigate to help and keep improve health of rural lower economic class, family system by comparing and analyzing the dietary management, between pair and odd pair family, and to get the data helpful the right guidance for rural. The subjects 1870 collected in 9 provinces by sampling with probability proportional to size (PPS). Questionnaire about dietary habit, food cultivation, production and preservation survey was conducted by trained interviewers. The main results were as follows : 1) The characteristics of odd pair families, head of household was female(77%), over 65 years(84.9%), small family(1.76 persons) and lower education(male 7.5 years, female 3.1 years) status. 2) As the states of diets of odd pair family, having breakfast(87.1 %) but one or two kinds of side dishes(31.3 %) only possible to guess lower status of food intake balance. Nutritional supplements(21. 7 %) was lower than that of paired family. 3) The aspects of dietary habit of odd pair family, no instant foods(70.7%), no snack(38.4%) no dine out(69.2%) were common. 4) Dietary habit scores were 7.78 points of odd pair family compared 8.34 points of paired family. 5) Food purchase place of odd pair family was market(44.2%) but super-market(42.7%) of paired family. 6)In odd pair family, seldom traditional dish preparation(62.0%) but prepared winter kimchi(81.9%), comparing seldom traditional dish(38.6%) and winter kimchi(96.4%) in paired family. 7)The food cultivation state was surveyed, pepper( 42.2 %) and chinese cabbage( 43.9 %) were consumed after cultivation, but sesame(59.4%), bean sprout(90.2%), tofu(92.8%) and egg(93.3%) were consumed by purchase in odd pair family.8) Food cultivation score of odd pair family was 2.98/12points significantly lower than 4.50/12 points of paired family(p<0.01). 9) At the status of fermentation food production in odd pair family, Duenjang(72.1 %) and Gochujang(69.7%) Kanjang(68.3%) Kimchi(82.1 %) and Meju(68.3%) were high rate of production, but more frequently producted in pair family. 10) The score of fermentation food production of odd pair family was 8.57/12points but significantly lower than 10.24/12 points of pair family(p<0.0001). 11) Food preservation score 0.48/6 points in odd pair family was not significantly different than that of pair family(1.07/6points).

• The Journal of Engineering Geology
• /
• v.2 no.2
• /
• pp.141-146
• /
• 1992

Synthetic stereo-pair of Landsat TM(Thematic Mapper) and shaded relief image from DEM(Digital Elevation Model) were digitally produced. They are very useful in optimizing the geological interpretability of the remotely sensed data.

• Journal of the Korean Institute of Navigation
• /
• v.1 no.1
• /
• pp.1-16
• /
• 1977

The aspects of Omega phase prediction are briefly reviewed, and Swanson's Model and Pierce's Model are presented. The equations for the Omega phase prediction and the most probable coefficients of the propagating equations are derived on the base of Pierce's Model by the least square method. The coefficients are calculated from the data which are the phase differences between the pairs of the Station A (Aldra, Norway), C(Haiku, Hawaii), and D(La Mour, North Dakota) observed at Busan Harbor of the South Coast of Korea in June and September, 1976. It is clearly shown that the standard deviations of the observed lane values at Busan Harbor are as followed: 1. June, 1976. Pair (A-C) : 0.1446 Pair (C-D) : 0.2598 2.September, 1976. Pair (A-D) : 0.3958 Pafr (C-D) : 0.3278 As a conclusion of the above investigation, it is shown that the Omega phase velocity can be predicted by the method, proposed in this paper, of analyzing the diurnal and seasonal variations of the Omege phase velocity except SID, PCD and AZD. If more observed data are employed, more exact Omega phase velocity is expected to be obtained.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2004.11a
• /
• pp.101-106
• /
• 2004

Subcellular localization is a key functional char acteristic of proteins. With the number of sequences entering databanks rapidly increasing, the importance of developing a powerful tool to identify protein subcellular location has become self-evident. In this paper, we introduce a novel method for predic ting protein subcellular locations from protein sequences. The main idea was motivated from the observation that amino acid pair composition data is redundant. By classifying from multiple feature subsets and using many kinds of amino acid pair composition s, we forced the classifiers to make uncorrelated errors. Therefore when we combined the predictors using a voting scheme, the prediction accuracy c ould be improved. Experiment was conducted on several data sets and significant improvement has been achieve d in a jackknife test.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.11-14
• /
• 2003

10GBASE-T is 10Gigabit Ethernet over horizontal structured, twisted-pair copper cabling.(1) It aims to transmit data at a speed of 10Gbps at a l00m distance away, through UTP (unshielded twisted -pair) Cat-5e cable 4-pair. This paper looks over the characteristic of media over Cat 5e, 6, 7, and then suggests how much noise should be removed from it in order to offer the transmission speed of 10Gbps as sending data through each physical medium.