• 한국소음진동공학회논문집
• /
• 제12권3호
• /
• pp.195-203
• /
• 2002

In the engine room and the aft part areas of the ship, there exist so many tank structures contacting with fresh water or sea water or oil. If these structures exhibit excessive vibrations during the sea trials, it takes a lot of cost, time and effort to improve vibration situation because the reinforcement work requires emptying the fluid out of the tanks, additional welding and special painting. It is therefore very important to predict a precise vibration characteristics of the tank structures at the design stage, however it is not easy to estimate vibration characteristics of the structures because of difficulties for accurate evaluation of the added (or virtual) mass effect due to the fluid inside the tank. In this paper, numerical and experimental approaches have been performed to present same fundamental data necessary for anti-vibration design of tank structures contacting with fluid, by investigating vibration behaviors of rectangular tank structure for various water depths.

• 한국가구학회지
• /
• 제25권3호
• /
• pp.173-181
• /
• 2014

Since the onset of the 21st century, digital technology has been widely adopted in various fields of art; it has enabled artists or designers to try diverse and brand-new ways of expression in literally every possible field of art, including painting, sculpture, and other design work. Furniture design is no exception. From the initial design step to the final production of furniture, modern digital skills are broadly utilized, creating a whole new set of designs that would otherwise be hardly conceivable and realizing a highly efficient furniture-making mechanism. More recently, the 3D printing technique, which is called a 21st century alchemy, has been successfully commercialized and is getting more popular, heralding yet another innovative shift in the area of furniture design and production. In this context, this study discusses the background of the furniture design using digital technology, and identifies the correlations between the modern digital technology and furniture design by redefining the concept of such digital technology. By reviewing multiple real-life cases, some of the key digital expressions found in modern furniture design are also analyzed. This study aims at suggesting the reason why digital technology is significant and promising in diverse ways for the development of modern furniture design.

• 복식문화연구
• /
• 제21권5호
• /
• pp.684-698
• /
• 2013

Interest and desire for analogue emotion increased with the dazzling development of digital technology. Especially, as analogue emotion got grafted in the design field, analysis through various expression media is being done. This study seeks to propose design of t-shirt using unique advantage of Hangeul calligraphy that can satisfy the modern flow and pattern design's various expressions. Calligraphy is being used in various fields such as advert, package, logo, movie poster, signboard, graphic design, calligraphy and abstract painting. Formative yet effective in readability and conveying meaning as it's expressed in letters, calligraphy is a field of attention with its contribution in extending the new design area. As a method of the study, altogether 8 pieces of t-shirts were proposed through related preceding research, literary research, co-work with calligraphy author, computer graphic program, and heat transfer. As such, the t-shirt designs which were created by suggesting various design and using traditional materials like calligraphy, can be used as novel and sensual factor, where one can get a glimpse at the potential of development as traditional fashion product.

• 한국건축시공학회지
• /
• 제9권2호
• /
• pp.93-101
• /
• 2009

Recently, public interest in housing defects, such as construction errors, occupiers' complaints, faults in production, and so on, is increasing. In addition, the construction requirements of high-rise residential buildings have increased, due to the higher prices of urban areas, especially in metropolitan areas. While previous research has focused on the defects occurring in apartment housing complexes, research has not been carried out on the defects occurring in high-rise residential buildings. In this paper, the defects patterns and characteristics of high-rise residential buildings are examined and analyzed and a defect management plan is then suggested. In order to do this, we collected the defects data of high-rise residential buildings recorded by 2,299 of 2,327 occupants. The defect occurrence rate (DOR) in the residential area is 98.8%. The frequency rate of defect occurrence over the total defect occurrence since building completion is 63.28% during the first year, 24.63% (second year), 6.88% (third year), 2.27% (fourth year), and 2.53% (fifth year). The result of correlation analysis between work types showed that there is a relationship between the built-in furniture and electronics (F&E) and painting works, and the F&E and masonry works, such as marble finishing. We expect that this research will assist in the efforts to decrease the number of defects in high-rise buildings.

• 한국분무공학회지
• /
• 제13권1호
• /
• pp.42-50
• /
• 2008

In the present work, atomization characteristics of shear-thinning liquid slurry discharging from fan spray nozzles were studied experimentally for spray painting applications. The effects of solid particle size and concentration on the properties (especially on the viscosity) of suspensions and mean drop size were examined by using model fluids. In the range of low particle concentration (below 3 wt%), the fluid viscosity was primarily determined by the particle size. On the other hand, in the range of high particle concentration (higher than 10 wt%), the agglomeration phenomenon and the oil absorption capability of solid particles played major roles in determining the fluid viscosity. In the high concentration region, which most of the paints belong to, the fluid became more viscous and the shear thinning behavior appeared more prominent as the particle concentration was increased. In this region, mean drop size(SMD) decreased more rapidly with the increase of the injection pressure. Also, SMD became larger with the higher particle concentration and the larger particle size.

• 산업공학
• /
• 제18권2호
• /
• pp.136-147
• /
• 2005

This paper introduces a simulation study regarding the operation of the Painted Body Storage (PBS) in an automobile factory. In the paint shop of the factory, same colored bodies are grouped together in order to increase the effectiveness of process, for example decrease the loss of cleaning the painting-gun when the color of body changes from one to another. However the production of automobiles in the assembly shop is a typical example of the mixed model assembly production. Therefore PBS locates between the paint shop and the assembly shop for control the input sequence of bodies to the assembly shop, and it enables to meet the smoothing requirement of assembly sequence. There are highly restricted constraints on the assembly sequence in a assembly shop. Those are spacing restriction and smoothing restriction. If such restrictions are violated, conveyor-stop or utility work will be necessary. Thus the major objective of PBS is to control the assembly sequence in a way to meet the two restrictions. In this paper a case study of PBS in an automotive factory is introduced. The storage/retrieval algorithms are suggested and the proposed system is verified using simulation models. Sensitivity analysis for operating factors is also conducted.

• 한국표면공학회지
• /
• 제50권2호
• /
• pp.72-84
• /
• 2017

In this work, electrophoretic paint (E-paint) was deposited on AZ31 Mg alloy after four different surface pretreatments: knife abrading, SiC paper abrading, deionized (DI) water immersion and NaOH immersion. The deposition process of E-paint was studied by analyses of voltage-time and current-time curves, amount of deposited paint, current efficiency and surface oxide film resistance and the adhesion of E-paint was examined by tape test before and after immersion in DI water for 500 h at $40$^{\circ}C$. It was found that the induction time for the deposition, the amount of deposited paint and the current efficiency are inversely proportional to the resistances of surface films prepared by different surface pretreatment methods. The electrophoretic painting showed longer inductance time, larger amount of deposited paint and higher current efficiency on the highly conducting surfaces, such as knife-abraded and SiC-abraded surfaces than on the less conducting surfaces, such as DI water-immersed and NaOH-immersed samples. Excellent adhesion was observed on the E-paintings deposited onto knife-abraded and SiC-abraded AZ31 Mg alloy samplesSiC-abraded AZ31 Mg alloy samples.

• 한국표면공학회지
• /
• 제49권3호
• /
• pp.231-237
• /
• 2016

This article reports a new chemical bath for preparing a mirror-like surface of AZ31 Mg alloy. In order to find an appropriate chemical polishing solution, four different acidic solutions of sulphuric acid, nitric acid, acetic acid and a specially designed mixture of nitric acid and acetic acid were investigated in view of the changes in surface appearance, roughness and dissolution rate of AZ31 Mg alloy. The surface scales on AZ31 Mg alloy were readily removed by all the acidic solutions, but a reflective surface was produced only by etching in the specially designed solution, and only after a specific etching time. The surface roughness increased with etching time in sulphuric acid, nitric acid, and acetic acid, but it lowered after a specific etching time in the specially designed mixture of nitric acid and acetic acid. Dissolution rate of the alloy in the specially designed mixture of nitric acid and acetic acid appeared to be more than twice than that in separate nitric acid or acetic acid. In this work, we recommend the mirror-like surface of AZ31 Mg alloy obtained by polishing for an optimum time in a mixture of nitric acid and acetic acid for following surface finishings, chemical conversion coating, electroplating, electrophoretic painting and anodizing treatment.

• 한국실내디자인학회논문집
• /
• 제25권3호
• /
• pp.40-50
• /
• 2016

The purpose of this study is to investigate the mise-en-$sc{\acute{e}}ne$ characteristics to direct an emotional atmosphere. It also analyzed whether these characteristics are reflected in how the work of Peter Zumthor. First, a theoretical consideration base on the distinction between montage and mise-en-$sc{\acute{e}}ne$, the research on space directing techniques in film. In particular, research on the mise-en-$sc{\acute{e}}ne$ around the technique of deep focus, long-take, charade. It also examines the mise-en-$sc{\acute{e}}ne$ tendencies that appear in the painting art, philosophy and psychology to deepen understanding. It should understand the mechanism by going to complete the meaning. Based on this, in terms of mise-en-$sc{\acute{e}}ne$ to analyze the space directing of Peter Zumthor. And the features of mise-en-$sc{\acute{e}}ne$ has its significance in having a look at whether there is any correlation in the 'Atmospheres' directing of Zumthor. As a result, the mise-en-$sc{\acute{e}}ne$ is active, multi-layered, ambiguous, uncertain, becoming and enables an open interpretation in terms of audience.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.428-439
• /
• 2020

The continuous development of information and communication technologies has resulted in an exponential increase in data. Consequently, technologies related to data analysis are growing in importance. The shipbuilding industry has high production uncertainty and variability, which has created an urgent need for data analysis techniques, such as machine learning. In particular, the industry cannot effectively respond to changes in the production-related standard time information systems, such as the basic cycle time and lead time. Improvement measures are necessary to enable the industry to respond swiftly to changes in the production environment. In this study, the lead times for fabrication, assembly of ship block, spool fabrication and painting were predicted using machine learning technology to propose a new management method for the process lead time using a master data system for the time element in the production data. Data preprocessing was performed in various ways using R and Python, which are open source programming languages, and process variables were selected considering their relationships with the lead time through correlation analysis and analysis of variables. Various machine learning, deep learning, and ensemble learning algorithms were applied to create the lead time prediction models. In addition, the applicability of the proposed machine learning methodology to standard work hour prediction was verified by evaluating the prediction models using the evaluation criteria, such as the Mean Absolute Percentage Error (MAPE) and Root Mean Squared Logarithmic Error (RMSLE).