• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.273-279
• /
• 2000

Until recently performance requirements for automatic transmission fluids have continued to change to reflect the design changes of automatic transmission. The major purpose for these design changes is to improve the fuel economy and easy driving. To meet recent performance requirements fur automatic transmission the needs for special base oils Bike API Group III and IV base oils become larger. In this paper to evaluate the effects of base oils on performance of automatic transmission fluids formulated with API Group I,II,III and IV and Dexron III and Hereon Type additive package, Brookfield viscosity, oxidation test, SAE No.2 friction test and seal compatibility test were examined. From the test we knew that the use of Croup III and IV base oils in ATF has several benefits in low temperature viscosity, oxidation stability and SAE No.2 friction characteristics.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.766-771
• /
• 2001

The package used to transport radioactive materials, which is called by cask, must be safe under normal and hypothetical accident conditions. These requirements for the cask design must be verified through test or finite element analysis. Since the cost for FE analysis is less than one for test. the verification by FE analysis is mainly used. But due to the complexity of mechanical behaviors. the results depends on how users apply the codes and it can cause severe errors during analysis. In this paper, finite element analysis is carried out for the 9 meters free drop and the puncture condition of the hypothetical accident conditions using LS-DYNA3D and ABAQUS/Explicit. We have investigated the analyzing technique for the free drop impact test of the cask and found several vulnerable cases to errors. The analyzed results were compared with each other. We have suggested a reliable and relatively simple analysis technique for the drop test of spent nuclear fuel casks.

• Korean journal of applied entomology
• /
• v.47 no.4
• /
• pp.491-495
• /
• 2008

Adding cinnamon (Cinnamonum cassia Blume) extract into the adhesive used to affix stickers to a chocolate package is an effective method for protecting chocolate products from infestation by the Indian meal moth (Plodia interpunctella Hubner). Chocolate packages treated with adhesive including 0.02% and 0.025% of cinnamon extract were not infested with the Indian meal moth for up to 30 days at $28.1^{\circ}C$ and 70-75% RH, whereas 100% of the packages without the extract were infested in the no-choice test. Chocolate packages treated with adhesive including 0.02% and 0.025% of cinnamon extract in the quadruple choice test were not infested with the Indian meal moth for up to 60 days at $28.1^{\circ}C$ and 70-75% RH, whereas 100% of the packages without the extract were infested. A panel test showed that the cinnamon extract treatment would not affect consumers' choices.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.3 s.27
• /
• pp.380-388
• /
• 1989

To evaluate the costs of the hypertension screening program of the Korea Medical Insurance Corporation, the records of the screening examinations were used. The sample size was 49,983 of the 906,554 people insured by the Corporation and was obtained by two-stage stratification random sampling. The alternatives for efficiency of the screening program, which were divided into three categories : modification of the screening test package, application of other hypertension diagnostic criteria, and selective approach of tested groups by age, were evaluated according to the cost per patient detected. The results of this study were as follows In the hypertension screening system, the cost per patient detected was Won 30,883. The most nonsensitive test for hypertension detection was ophthalmoscopy, which was examined during the second stage of screening. If the ophthalmoscope examination was excluded, olny one person was not detected, which was 0.2% of detected persons, and the cost per patient detected decreased to Won 28,098. The most efficient modification of the screening test package was measurement of blood pressure through the first and second stages of screening. The cost per patient detected by this modification was Won 24,408. The application of other diagnostic critera, which were more restricted criteria, increased the cost per patient detected by 3.7%-6.7%. The cost per patient detected were Won 170,582 for persons less than 39 years old, Won 20,032 for persons 40 to 59 years old, and Won 8,675 for persons 60 years old and over. In conclusion, the best alternative suggested with respect to efficiency and practical application excluded the ophthalmoscope examination of second stage screening and restricted the target population to persons greater than 40 years old. The application of this alternative decreased 54.9% of the screening costs and the cost per patient detected was Won 15,222. This study was limited in that measurement of effectivenes was not of the ultimate goal of screening, which is decreasing morbidity and mortality, but was of disease detection as the short-term objective.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.7
• /
• pp.450-454
• /
• 2018

Because of the rapidly changing environment and high uncertainties, the semiconductor industry is in need of appropriate forecasting technology. In particular, both the cost and time in the test process are increasing because the process becomes complicated and there are more factors to consider. In this paper, we propose a prediction model that predicts a final "good" or "bad" on the basis of preconditioning test data generated in the semiconductor test process. The proposed prediction model solves the classification and regression problems that are often dealt with in the semiconductor process and constructs a reliable prediction model. We also implemented a prediction model through various machine learning algorithms. We compared the performance of the prediction models constructed through each algorithm. Actual data of the semiconductor test process was used for accurate prediction model construction and effective test verification.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.5
• /
• pp.383-390
• /
• 2020

Wedge locks have been widely used for spaceborne electronics for mounting or removal of a printed circuit board (PCB) during integration, test and maintenance process. However, it can basically provide a mechanical constraint on the edge of the board. Thus, securing a fatigue life of solder joint for electronic package by limiting board deflection becomes difficult as the board size increases. Previously, additional stiffeners have been applied to reduce the board deflection, but the mass and volume increases of electronics are unavoidable. To overcome the aforementioned limitation, we proposed an application of multi-layered PCB sheet with viscoelastic adhesive tapes to implement high-damping capability on the board. Thus, it is more advantageous in securing the fatigue life of package under launch environment compared with the previous approach. The basic characteristics of the PCB with the multi-layered sheet was investigated through free-vibration tests at various temperatures. The effectiveness of the proposed design was validated through launch vibration test at qualification level and fatigue life prediction of electronic package based on the test results.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.1
• /
• pp.83-90
• /
• 2017

In this paper, we evaluated the solderability of thin electroless nickel-electroless palladium-immersion gold (ENEPIG) plating layer for fine-pitch package applications. Firstly, the wetting behavior, interfacial reactions, and mechanical reliability of a Sn-3.0Ag-0.5Cu (SAC305) solder alloy on a thin ENEPIG coated substrate were evaluated. In the wetting test, maximum wetting force increased with increasing immersion time, and the wetting force remained a constant value after 5 s immersion time. In the initial soldering reaction, $(Cu,Ni)_6Sn_5$ intermetallic compound (IMC) and P-rich Ni layer formed at the SAC305/ENEPIG interface. After a prolonged reaction, the P-rich Ni layer was destroyed, and $(Cu,Ni)_3Sn$ IMC formed underneath the destroyed P-rich Ni layer. In the high-speed shear test, the percentage of brittle fracture increased with increasing shear speed.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.6 no.1
• /
• pp.31-36
• /
• 2000

180g of fermented soy paste and 150g of red pepper paste were packaged in glass jars of 232 mL with different conditions of active packaging and then stored at $13^{\circ}C$ for about 170 and 128 days, respectively. During the storage, package atmosphere, surface color, pH, acidity and microbial flora were monitored to see the effect of packaging conditions. Test packaging conditions include package equipped with $Ca(OH)_2\;as\;CO_2$ absorber, package with pinhole and closed control one. Closed control packages of soypaste and red pepper paste showed the increased $CO_2$ partial pressure, the decreased $O_2$ partial pressure and the constant $N_2$ partial pressure to produce high pressure buildup with storage. The paste packages with $Ca(OH)_2$ maintained relatively low $CO_2$ partial pressure and thus the package pressure close to normal atmospheric pressure for initial storage period of 70 days. The packages with air pinhole channel had the partial pressures of $O_2\;and\;N_2$ decreased with storage time, while $CO_2$ partial pressure first increased to a maximum and then slowly decreased thereafter Without any pressure increase the packages with pinhole gave the lowest quality changes possibly due to the effect of package atmosphere, but it had problem of mold contamination and growth for soy paste after 120 days. There were no difference in microbial flora between the packages after about 70 day storage.

• Journal of Korean society of Dental Hygiene
• /
• v.4 no.1
• /
• pp.119-132
• /
• 2004

The purpose of this study was to introduce PBL to dental hygienist education in an effort to raise a question about the inauthentic and inappropriate curriculum. PBL is one of learning methods to enhance the problem-solving ability of learners, and it's attempted to develop a PBL package focusing on dental hygienist roles to lay the foundation for producing competent and expert dental hygienists with a good problem- solving ability. The literature concerned was reviewed from November 2002 through January 2003 to determine whether or not PBL was applicable to dental-hygienist course, and that turned out to be effective for dental hygienist education. And then a PBL package was developed to train students to be knowledgeable and have a knowhow and excellent problem-solving skills. The characteristics of the PBL package could be described as follows: First, that focused on dental hygienist roles to serve the purpose of this study to remedy the current unrealistic and improper curriculum and improve the problem-solving skills of learners. Second, time factor was taken into account. In this four-week course for two credits, there are four classes a week, and it's required to take six or eight weeks to apply the PBL package, which is expected to demotivate students. Therefore, it's planned to conduct more weekly classes to make a proper progress. Third, a wide variety of teaching aids were put to use, and learner would be encouraged to be more interactive and utilize teaching aids properly, and eventually, they could have an opportunity to better express themselves. Fourth, online real-time learner discussion would be attended by this researcher. Learners would have a discussion in real time in the Internet cafe chat room, and different discussion time would be allocated to each team. This researcher would take part in each team's discussion once or more. Fifth, learners would prepare one or more journal(s) about four-hour Internet cafe learning. They have to make it twice a week at least, and it would be a good opportunity for learners to look back on themselves and their teams, and their learning effect would be greater. Specific rules were presented to help them make a successful self-examination. Sixth, there are some spaces in the lower part of objective test sheets to have students describe why they make a particular answer choice. They would be asked to depict the reason of their prior evaluation and lecture assessment especially because their responses would be important for more successful discussion and feedback. Seventh, problem-solving approach was designed to attain learning objectives, stimulate the creative thinking of learners and help them share a more systematic discussion. That would serve as a secondhand guide not to make them digress when they discuss by using information they acquire from a scenario presented in class.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.65-67
• /
• 1996

The spacer is solid insulator which supports main conductor in GIS and seperates gas area. The 800kV spacer was designed and manufactured considering the results of electrical and structural analysis using commercial package MSC/NASTRAN. Temperature test and water pressure test were carries out, and the results from water pressure test were compared with the calculated ones from MSC/NSATRAN.